Heimdall_Diff
6 removals
| Words removed | 30 |
| Total words | 178 |
| Words removed (%) | 16.85 |
21 lines
10 additions
| Words added | 51 |
| Total words | 199 |
| Words added (%) | 25.63 |
25 lines
Download HeimdallSuite, I91001GB_4GB pit & Samsung USB Drivers
Download HeimdallSuite & Samsung USB Drivers
Install Samsung USB Drivers
Install Samsung USB Drivers
Connect the phone in Download mode (Vol. Down + Home + Power)
Connect the phone in Download mode (Vol. Down + Home + Power)
Go to Heimdall Suite/Drivers & open 'zadig' (Run in admin mode)
Go to Heimdall Suite/Drivers & open 'zadig' (Run in admin mode)
Select 'List All Devices' under 'Options'
Select 'List All Devices' under 'Options'
Select 'Gadget Serial' & 'libusb0 (v1.2.5.0)' from the drop menu
Select 'Gadget Serial' & 'libusb0 (v1.2.5.0)' from the drop menu & scroll menu respectively
Click on Install/Replace Driver
Click on Install/Replace Driver
Close 'zadig'
Close 'zadig'
Reboot again into Download mode
Open 'heimdall-frontend'
Open 'heimdall-frontend'
Select 'Utilities' tab & click on 'Detect' under 'Detect Device' option
Select 'Utilities' tab & click on 'Detect' under 'Detect Device' option
Make sure the 'Output' window says 'Device Detected'
Make sure the 'Output' window says 'Device Detected'
Scroll down to 'Download PIT' section & click on 'Save As...' under 'Destination File'
Type any name under 'Name:' and select 'Save'. Do not give any filename extensions
Click on 'Download'
Reboot again into Download mode
Select 'Flash' tab
Select 'Flash' tab
Load the I91001GB_4GB pit file or the existing pit file you use under 'PIT'. Do not select 'Repartition' checkbox
Load the downloaded pit under 'PIT'. Do not select 'Repartition' checkbox
Select the 'Repartition' checkbox only if you are coming from 'Stock' pit (I9100512MB_2GB)
Click the 'Add' button under 'Partitions (Files)'
Click the 'Add' button under 'Partitions (Files)'
Select 'RECOVERY' from the drop down menu in 'Partition Name' under 'Partition Details'. Make sure 'Partition ID' reads 7
Select 'RECOVERY' from the drop down menu in 'Partition Name' under 'Partition Details'. Make sure 'Partition ID' reads 7
Download the latest TWRP file from the download link above
Download the latest TWRP image from the official website
Load the img image under 'File'
Load the img image under 'File'
Now click on 'Start'
Now click on 'Start'
The image will get flashed in '/dev/block/mmcblk0p6' partition under mountpoint '/recovery'
The image will get flashed in '/dev/block/mmcblk0p6' partition under mountpoint '/recovery'
Device will automatically restart when flashing is complete
Device will automatically restart when flashing is complete