Texte vergleichen

Finde den Unterschied zwischen zwei Textdateien

Live-Editor

Leerzeichen ausblenden

Gleiches ausblenden

Zeilenumbruch aus

Ansicht

Vergleichsgenauigkeit

Textstile

Syntaxhervorhebung

Diffchecker Desktop Der sicherste Weg, Diffchecker zu nutzen. Hol dir die Desktop-App: Deine Diffs verlassen nie deinen Computer!Desktop holen

zwave2mqtt-inovelli-issue

Erstellt vor 6 JahrenDiff läuft nie ab

52 Entfernungen

Zeilen
Gesamt
Entfernt

Zeichen
Gesamt
Entfernt

Um diese Funktion weiterhin zu nutzen, aktualisiere auf Diffchecker Pro Preise anzeigen

355 Zeilen

23 Hinzufügungen

Zeilen
Gesamt
Hinzugefügt

Zeichen
Gesamt
Hinzugefügt

Um diese Funktion weiterhin zu nutzen, aktualisiere auf Diffchecker Pro Preise anzeigen

329 Zeilen

<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/031E:0001:0002</MetaDataItem>

<MetaDataItem name="ZWProductPage" type="2" id="1">https://products.z-wavealliance.org/products/3451</MetaDataItem>

<MetaDataItem name="ProductPic">images/inovelli/lzw30-sn.png</MetaDataItem>

<MetaDataItem name="Description">The Inovelli Red Series On/Off is a Z-Wave in-wall switch that controls attached LED, CFL, & Incandescent lighting which can be highly customized to your liking at the switch itself with our unique config button and advanced firmware. In addition, the Red Series comes with advanced features such as scene support, power monitoring, notifications, local protection, etc.</MetaDataItem>

<MetaDataItem name="ProductManual">https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3451/LZW30-SN%20Manual.pdf</MetaDataItem>

<MetaDataItem name="ProductPage">https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/</MetaDataItem>

<MetaDataItem name="InclusionDescription">To include your switch, start the inclusion process on your HUB and tap the Configuration Button three (3) times. Please Note: If this doesn't work, you can check to see if your switch is within Z-Wave Range by holding down the Configuration Button for 5-10 seconds (if it's not within range, the LED Bar will indicate Red and if it is within Range, the LED Bar will indicate Green). If your switch indicates Red, please move the switch closer to the HUB. If your switch indicates Green, please try running an Exclusion to reset your switch.</MetaDataItem>

<MetaDataItem name="ExclusionDescription">To Exclude your switch, put your HUB in exclusion mode and press the Configuration Button three (3) times.</MetaDataItem>

<MetaDataItem name="ResetDescription">You may factory reset the switch by holding down the Config Button for twenty (20) or more seconds. The LED Bar will turn Red and blink three (3) times to confirm. However, we recommend using a certified Z-Wave controller to remove the device from your network for factory resetting the switch. Only use either of these procedures in the event that the network primary controller is missing or otherwise inoperable.</MetaDataItem>

<MetaDataItem name="ProductSupport">https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/</MetaDataItem>

<MetaDataItem name="FrequencyName" type="2" id="1">U.S. / Canada / Mexico</MetaDataItem>

<MetaDataItem name="Name">LZW30-SN Switch</MetaDataItem>

<Entry author="Eric Maycock - ericm@inovelli.com" date="10 Sep 2019" revision="6">Adding Metadata</Entry>

</ChangeLog>

</MetaData>

</Product>

</Manufacturer>

</Compatibility>

<State>

</State>

</CommandClass>

<State>

</State>

</CommandClass>

<State>

</State>

<Help>Turn On/Off Device</Help>

</Value>

</CommandClass>

<State>

</State>

<Help>Switch All Devices On/Off</Help>

</Value>

</CommandClass>

<State>

</State>

</Value>

</Value>

</Value>

</Value>

</CommandClass>

<State>

</State>

</CommandClass>

<State>

</State>

</Value>

</Value>

</Value>

</Value>

</Value>

</Value>

</CommandClass>

<State>

</State>

<Help>ZWave+ Version Supported on the Device</Help>

</Value>

<Help>Icon File to use for the Installer Application</Help>

</Value>

<Help>Icon File to use for the User Application</Help>

</Value>

</CommandClass>

<State>

</State>

<Help>When Power is restored Range: 0-2 Default: 0</Help>

</Value>

<Help>Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up. Range: 0-1 Default: 0</Help>

</Value>

<Help>Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started that is the duration of this setting. When the timer expires, the switch is turned off. Range: 0-32767 Default: 0</Help>

</Value>

<Help>When should the switch send commands to associated devices? 01 - local 02 - 3way 03 - 3way & local 04 - z-wave hub 05 - z-wave hub & local 06 - z-wave hub & 3-way 07 - z-wave hub & local & 3way 08 - timer 09 - timer & local 10 - timer & 3-way 11 - timer & 3-way & local 12 - timer & z-wave hub 13 - timer & z-wave hub & local 14 - timer & z-wave hub & 3-way 15 - all Range: 0-15 Default: 15</Help>

</Value>

<Help>This is the color of the LED strip. Range: 0 to 255 Default: 170</Help>

</Value>

<Help>This is the intensity of the LED strip. Range: 0-10 Default: 5</Help>

</Value>

<Help>This is the intensity of the LED strip when the switch is off. This is useful for users to see the light switch location when the lights are off. Range: 0 - 10 Default: 0</Help>

</Value>

<Help>Please see website for documentation. Range: 0-83823359 Default: 0</Help>

</Value>

<Help>The power level change that will result in a new power report being sent. The value is a percentage of the previous report. 0 = disabled. Range: 0-100 Default: 10</Help>

</Value>

<Help>Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent. Range: 0 to 32767 Default: 3600</Help>

</Value>

<Help>The energy level change that will result in a new energy report being sent. The value is a percentage of the previous report. Range: 0-100 Default: 10</Help>

</Value>

</CommandClass>

<State>

</State>

<Help>Revision of the Config file currently loaded</Help>

</Value>

<Help>Revision of the Config file on the File System</Help>

</Value>

<Help>Latest Revision of the Config file available for download</Help>

</Value>

<Help>Manufacturer Specific Device ID/Model</Help>

</Value>

<Help>Device Serial Number</Help>

</Value>

</CommandClass>

<State>

</State>

<Help>Output RF PowerLevel</Help>

</Value>

<Help>Timeout till the PowerLevel is reset to Normal</Help>

</Value>

<Help>Apply the Output PowerLevel and Timeout Values</Help>

</Value>

<Help>Node to Perform a test against</Help>

</Value>

<Help>PowerLevel to use for the Test</Help>

</Value>

<Help>How Many Messages to send to the Note for the Test</Help>

</Value>

<Help>Perform a PowerLevel Test against the a Node</Help>

</Value>

<Help>Get the results of the latest PowerLevel Test against a Node</Help>

</Value>

<Help>The Current Status of the last PowerNode Test Executed</Help>

</Value>

<Help>Number of Messages successfully Acked by the Target Node</Help>

</Value>

</CommandClass>

<State>

</State>

<Help>Protect a device against unintentional control</Help>

</Value>

</CommandClass>

<State>

</State>

</Group>

</Associations>

</CommandClass>

<State>

</State>

<Help>Z-Wave Library Version</Help>

</Value>

<Help>Z-Wave Protocol Version</Help>

</Value>

<Help>Application Version</Help>

</Value>

</CommandClass>

<State>

</State>

<Help>Is Communication with Device Encrypted</Help>

</Value>

</CommandClass>

</CommandClasses>

</Node>

Gespeicherte Diffs

Originaltext

Datei öffnen

<Node id="10" name="" location="" basic="4" generic="16" specific="1" roletype="5" devicetype="1793" nodetype="0" type="Binary Power Switch" listening="true" frequentListening="false" beaming="true" routing="true" max_baud_rate="100000" version="4" configrevision="6" query_stage="Complete">
		<Neighbors>237,127,126,83,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0</Neighbors>
		<Manufacturer id="31e" name="Inovelli">
			<Product type="2" id="1" name="LZW30-SN Switch Red Series">
				<MetaData>
					<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/031E:0001:0002</MetaDataItem>
					<MetaDataItem name="ZWProductPage" type="2" id="1">https://products.z-wavealliance.org/products/3451</MetaDataItem>
					<MetaDataItem name="ProductPic">images/inovelli/lzw30-sn.png</MetaDataItem>
					<MetaDataItem name="Description">The Inovelli Red Series On/Off is a Z-Wave in-wall switch that controls attached LED, CFL, &amp; Incandescent lighting which can be highly customized to your liking at the switch itself with our unique config button and advanced firmware. In addition, the Red Series comes with advanced features such as scene support, power monitoring, notifications, local protection, etc.</MetaDataItem>
					<MetaDataItem name="ProductManual">https://products.z-wavealliance.org/ProductManual/File?folder=&amp;filename=MarketCertificationFiles/3451/LZW30-SN%20Manual.pdf</MetaDataItem>
					<MetaDataItem name="ProductPage">https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/</MetaDataItem>
					<MetaDataItem name="InclusionDescription">To include your switch, start the inclusion process on your HUB and tap the Configuration Button three (3) times. Please Note: If this doesn&apos;t work, you can check to see if your switch is within Z-Wave Range by holding down the Configuration Button for 5-10 seconds (if it&apos;s not within range, the LED Bar will indicate Red and if it is within Range, the LED Bar will indicate Green). If your switch indicates Red, please move the switch closer to the HUB. If your switch indicates Green, please try running an Exclusion to reset your switch.</MetaDataItem>
					<MetaDataItem name="ExclusionDescription">To Exclude your switch, put your HUB in exclusion mode and press the Configuration Button three (3) times.</MetaDataItem>
					<MetaDataItem name="ResetDescription">You may factory reset the switch by holding down the Config Button for twenty (20) or more seconds. The LED Bar will turn Red and blink three (3) times to confirm. However, we recommend using a certified Z-Wave controller to remove the device from your network for factory resetting the switch. Only use either of these procedures in the event that the network primary controller is missing or otherwise inoperable.</MetaDataItem>
					<MetaDataItem name="ProductSupport">https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/</MetaDataItem>
					<MetaDataItem name="FrequencyName" type="2" id="1">U.S. / Canada / Mexico</MetaDataItem>
					<MetaDataItem name="Name">LZW30-SN Switch</MetaDataItem>
					<MetaDataItem name="Identifier" type="2" id="1">LZW30-SN</MetaDataItem>
					<ChangeLog>
						<Entry author="Eric Maycock - ericm@inovelli.com" date="10 Sep 2019" revision="6">Adding Metadata</Entry>
					</ChangeLog>
				</MetaData>
			</Product>
		</Manufacturer>
		<CommandClasses>
			<CommandClass id="32" name="COMMAND_CLASS_BASIC">
				<Compatibility>
					<Mapping>37</Mapping>
				</Compatibility>
				<State>
					<CCVersion>1</CCVersion>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="34" name="COMMAND_CLASS_APPLICATION_STATUS">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="37" name="COMMAND_CLASS_SWITCH_BINARY">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>0</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="bool" genre="user" instance="1" index="0" label="Switch" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="False">
					<Help>Turn On/Off Device</Help>
				</Value>
			</CommandClass>
			<CommandClass id="39" name="COMMAND_CLASS_SWITCH_ALL">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Switch All" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>Switch All Devices On/Off</Help>
					<Item label="Disabled" value="0" />
					<Item label="Off Enabled" value="1" />
					<Item label="On Enabled" value="2" />
					<Item label="On and Off Enabled" value="255" />
				</Value>
			</CommandClass>
			<CommandClass id="50" name="COMMAND_CLASS_METER">
				<Compatibility />
				<State>
					<CCVersion>3</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>2</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="decimal" genre="user" instance="1" index="0" label="Electric - kWh" units="kWh" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.999">
					<Help></Help>
				</Value>
				<Value type="decimal" genre="user" instance="1" index="2" label="Electric - W" units="W" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.0">
					<Help></Help>
				</Value>
				<Value type="bool" genre="user" instance="1" index="256" label="Exporting" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="False">
					<Help></Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="257" label="Reset" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help></Help>
				</Value>
			</CommandClass>
			<CommandClass id="90" name="COMMAND_CLASS_DEVICE_RESET_LOCALLY">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="91" name="COMMAND_CLASS_CENTRAL_SCENE">
				<Compatibility />
				<State>
					<CCVersion>3</CCVersion>
					<InNif>true</InNif>
					<SceneCount>3</SceneCount>
					<StaticRequests>2</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="user" instance="1" index="1" label="Scene 1" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="8">
					<Help></Help>
					<Item label="Inactive" value="0" />
					<Item label="Pressed 1 Time" value="1" />
					<Item label="Key Released" value="2" />
					<Item label="Key Held down" value="3" />
					<Item label="Pressed 2 Times" value="4" />
					<Item label="Pressed 3 Times" value="5" />
					<Item label="Pressed 4 Times" value="6" />
					<Item label="Pressed 5 Times" value="7" />
				</Value>
				<Value type="list" genre="user" instance="1" index="2" label="Scene 2" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="8">
					<Help></Help>
					<Item label="Inactive" value="0" />
					<Item label="Pressed 1 Time" value="1" />
					<Item label="Key Released" value="2" />
					<Item label="Key Held down" value="3" />
					<Item label="Pressed 2 Times" value="4" />
					<Item label="Pressed 3 Times" value="5" />
					<Item label="Pressed 4 Times" value="6" />
					<Item label="Pressed 5 Times" value="7" />
				</Value>
				<Value type="list" genre="user" instance="1" index="3" label="Scene 3" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="2">
					<Help></Help>
					<Item label="Inactive" value="0" />
					<Item label="Pressed 1 Time" value="1" />
				</Value>
				<Value type="int" genre="user" instance="1" index="256" label="Scene Count" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="3">
					<Help></Help>
				</Value>
				<Value type="int" genre="config" instance="1" index="257" label="Scene Reset Timeout" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="1000">
					<Help></Help>
				</Value>
			</CommandClass>
			<CommandClass id="94" name="COMMAND_CLASS_ZWAVEPLUS_INFO">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>6</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="byte" genre="system" instance="1" index="0" label="ZWave+ Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="1">
					<Help>ZWave+ Version Supported on the Device</Help>
				</Value>
				<Value type="short" genre="system" instance="1" index="1" label="InstallerIcon" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="1793">
					<Help>Icon File to use for the Installer Application</Help>
				</Value>
				<Value type="short" genre="system" instance="1" index="2" label="UserIcon" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="1793">
					<Help>Icon File to use for the User Application</Help>
				</Value>
			</CommandClass>
			<CommandClass id="112" name="COMMAND_CLASS_CONFIGURATION">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Value type="list" genre="config" instance="1" index="1" label="Power On State" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="2" vindex="0" size="1">
					<Help>When Power is restored Range: 0-2 Default: 0</Help>
					<Item label="Previous" value="0" />
					<Item label="On" value="1" />
					<Item label="Off" value="2" />
				</Value>
				<Value type="list" genre="config" instance="1" index="2" label="Invert Switch" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="1" vindex="0" size="1">
					<Help>Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up. Range: 0-1 Default: 0</Help>
					<Item label="Disabled" value="0" />
					<Item label="Enabled" value="1" />
				</Value>
				<Value type="short" genre="config" instance="1" index="3" label="Auto Off Timer" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="32767" value="0">
					<Help>Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started that is the duration of this setting. When the timer expires, the switch is turned off. Range: 0-32767 Default: 0</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="4" label="Association Behavior" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="15" value="15">
					<Help>When should the switch send commands to associated devices? 01 - local 02 - 3way 03 - 3way &amp; local 04 - z-wave hub 05 - z-wave hub &amp; local 06 - z-wave hub &amp; 3-way 07 - z-wave hub &amp; local &amp; 3way 08 - timer 09 - timer &amp; local 10 - timer &amp; 3-way 11 - timer &amp; 3-way &amp; local 12 - timer &amp; z-wave hub 13 - timer &amp; z-wave hub &amp; local 14 - timer &amp; z-wave hub &amp; 3-way 15 - all Range: 0-15 Default: 15</Help>
				</Value>
				<Value type="short" genre="config" instance="1" index="5" label="LED Indicator Color" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="170">
					<Help>This is the color of the LED strip. Range: 0 to 255 Default: 170</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="6" label="LED Indicator Intensity" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="10" value="5">
					<Help>This is the intensity of the LED strip. Range: 0-10 Default: 5</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="7" label="LED Indicator Intensity (When Off)" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="10" value="1">
					<Help>This is the intensity of the LED strip when the switch is off. This is useful for users to see the light switch location when the lights are off. Range: 0 - 10 Default: 0</Help>
				</Value>
				<Value type="int" genre="config" instance="1" index="8" label="LED Strip Effect" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="83823359" value="0">
					<Help>Please see website for documentation. Range: 0-83823359 Default: 0</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="10" label="Active Power Alerts" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="100" value="10">
					<Help>The power level change that will result in a new power report being sent. The value is a percentage of the previous report. 0 = disabled. Range: 0-100 Default: 10</Help>
				</Value>
				<Value type="short" genre="config" instance="1" index="11" label="Periodic Power + Energy Reports" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="32767" value="3600">
					<Help>Time period between consecutive power &amp; energy reports being sent (in seconds). The timer is reset after each report is sent. Range: 0 to 32767 Default: 3600</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="12" label="Energy Reports" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="100" value="10">
					<Help>The energy level change that will result in a new energy report being sent. The value is a percentage of the previous report. Range: 0-100 Default: 10</Help>
				</Value>
			</CommandClass>
			<CommandClass id="114" name="COMMAND_CLASS_MANUFACTURER_SPECIFIC">
				<Compatibility />
				<State>
					<CCVersion>2</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>0</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="int" genre="system" instance="1" index="0" label="Loaded Config Revision" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="6">
					<Help>Revision of the Config file currently loaded</Help>
				</Value>
				<Value type="int" genre="system" instance="1" index="1" label="Config File Revision" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="6">
					<Help>Revision of the Config file on the File System</Help>
				</Value>
				<Value type="int" genre="system" instance="1" index="2" label="Latest Available Config File Revision" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="6">
					<Help>Latest Revision of the Config file available for download</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="3" label="Device ID" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="">
					<Help>Manufacturer Specific Device ID/Model</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="4" label="Serial Number" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="101010101010101010101010101010101">
					<Help>Device Serial Number</Help>
				</Value>
			</CommandClass>
			<CommandClass id="115" name="COMMAND_CLASS_POWERLEVEL">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Powerlevel" units="dB" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>Output RF PowerLevel</Help>
					<Item label="Normal" value="0" />
					<Item label="-1dB" value="1" />
					<Item label="-2dB" value="2" />
					<Item label="-3dB" value="3" />
					<Item label="-4dB" value="4" />
					<Item label="-5dB" value="5" />
					<Item label="-6dB" value="6" />
					<Item label="-7dB" value="7" />
					<Item label="-8dB" value="8" />
					<Item label="-9dB" value="9" />
				</Value>
				<Value type="byte" genre="system" instance="1" index="1" label="Timeout" units="seconds" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="0">
					<Help>Timeout till the PowerLevel is reset to Normal</Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="2" label="Set Powerlevel" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help>Apply the Output PowerLevel and Timeout Values</Help>
				</Value>
				<Value type="byte" genre="system" instance="1" index="3" label="Test Node" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="0">
					<Help>Node to Perform a test against</Help>
				</Value>
				<Value type="list" genre="system" instance="1" index="4" label="Test Powerlevel" units="dB" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>PowerLevel to use for the Test</Help>
					<Item label="Normal" value="0" />
					<Item label="-1dB" value="1" />
					<Item label="-2dB" value="2" />
					<Item label="-3dB" value="3" />
					<Item label="-4dB" value="4" />
					<Item label="-5dB" value="5" />
					<Item label="-6dB" value="6" />
					<Item label="-7dB" value="7" />
					<Item label="-8dB" value="8" />
					<Item label="-9dB" value="9" />
				</Value>
				<Value type="short" genre="system" instance="1" index="5" label="Frame Count" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="0">
					<Help>How Many Messages to send to the Note for the Test</Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="6" label="Test" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help>Perform a PowerLevel Test against the a Node</Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="7" label="Report" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help>Get the results of the latest PowerLevel Test against a Node</Help>
				</Value>
				<Value type="list" genre="system" instance="1" index="8" label="Test Status" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>The Current Status of the last PowerNode Test Executed</Help>
					<Item label="Failed" value="0" />
					<Item label="Success" value="1" />
					<Item label="In Progress" value="2" />
				</Value>
				<Value type="short" genre="system" instance="1" index="9" label="Acked Frames" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="0">
					<Help>Number of Messages successfully Acked by the Target Node</Help>
				</Value>
			</CommandClass>
			<CommandClass id="117" name="COMMAND_CLASS_PROTECTION">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Protection" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>Protect a device against unintentional control</Help>
					<Item label="Unprotected" value="0" />
					<Item label="Protection by Sequence" value="1" />
					<Item label="No Operation Possible" value="2" />
				</Value>
			</CommandClass>
			<CommandClass id="133" name="COMMAND_CLASS_ASSOCIATION">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Associations num_groups="2">
					<Group index="1" max_associations="5" label="Lifeline" auto="true">
						<Node id="1" />
					</Group>
					<Group index="2" max_associations="5" label="Basic_Set" auto="false" />
				</Associations>
			</CommandClass>
			<CommandClass id="134" name="COMMAND_CLASS_VERSION">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="string" genre="system" instance="1" index="0" label="Library Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="3">
					<Help>Z-Wave Library Version</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="1" label="Protocol Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="6.04">
					<Help>Z-Wave Protocol Version</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="2" label="Application Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="1.09">
					<Help>Application Version</Help>
				</Value>
			</CommandClass>
			<CommandClass id="152" name="COMMAND_CLASS_SECURITY">
				<Compatibility />
				<State>
					<CCVersion>1</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="bool" genre="system" instance="1" index="0" label="Secured" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="False">
					<Help>Is Communication with Device Encrypted</Help>
				</Value>
			</CommandClass>
		</CommandClasses>
	</Node>

Bearbeitung

Datei öffnen

<Node id="10" name="" location="" basic="4" generic="16" specific="1" roletype="5" devicetype="1793" nodetype="0" type="Binary Power Switch" listening="true" frequentListening="false" beaming="true" routing="true" max_baud_rate="100000" version="4" configrevision="6" query_stage="Complete">
		<Neighbors>237,127,126,83,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0</Neighbors>
		<Manufacturer id="31e" name="Inovelli">
			<Product type="2" id="1" name="LZW30-SN Switch Red Series">
				<MetaData>
					<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/031E:0001:0002</MetaDataItem>
					<MetaDataItem name="ZWProductPage" type="2" id="1">https://products.z-wavealliance.org/products/3451</MetaDataItem>
					<MetaDataItem name="ProductPic">images/inovelli/lzw30-sn.png</MetaDataItem>
					<MetaDataItem name="Description">The Inovelli Red Series On/Off is a Z-Wave in-wall switch that controls attached LED, CFL, &amp; Incandescent lighting which can be highly customized to your liking at the switch itself with our unique config button and advanced firmware. In addition, the Red Series comes with advanced features such as scene support, power monitoring, notifications, local protection, etc.</MetaDataItem>
					<MetaDataItem name="ProductManual">https://products.z-wavealliance.org/ProductManual/File?folder=&amp;filename=MarketCertificationFiles/3451/LZW30-SN%20Manual.pdf</MetaDataItem>
					<MetaDataItem name="ProductPage">https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/</MetaDataItem>
					<MetaDataItem name="InclusionDescription">To include your switch, start the inclusion process on your HUB and tap the Configuration Button three (3) times. Please Note: If this doesn&apos;t work, you can check to see if your switch is within Z-Wave Range by holding down the Configuration Button for 5-10 seconds (if it&apos;s not within range, the LED Bar will indicate Red and if it is within Range, the LED Bar will indicate Green). If your switch indicates Red, please move the switch closer to the HUB. If your switch indicates Green, please try running an Exclusion to reset your switch.</MetaDataItem>
					<MetaDataItem name="ExclusionDescription">To Exclude your switch, put your HUB in exclusion mode and press the Configuration Button three (3) times.</MetaDataItem>
					<MetaDataItem name="ResetDescription">You may factory reset the switch by holding down the Config Button for twenty (20) or more seconds. The LED Bar will turn Red and blink three (3) times to confirm. However, we recommend using a certified Z-Wave controller to remove the device from your network for factory resetting the switch. Only use either of these procedures in the event that the network primary controller is missing or otherwise inoperable.</MetaDataItem>
					<MetaDataItem name="ProductSupport">https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/</MetaDataItem>
					<MetaDataItem name="FrequencyName" type="2" id="1">U.S. / Canada / Mexico</MetaDataItem>
					<MetaDataItem name="Name">LZW30-SN Switch</MetaDataItem>
					<MetaDataItem name="Identifier" type="2" id="1">LZW30-SN</MetaDataItem>
					<ChangeLog>
						<Entry author="Eric Maycock - ericm@inovelli.com" date="10 Sep 2019" revision="6">Adding Metadata</Entry>
					</ChangeLog>
				</MetaData>
			</Product>
		</Manufacturer>
		<CommandClasses>
			<CommandClass id="32" name="COMMAND_CLASS_BASIC">
				<Compatibility>
					<Mapping>37</Mapping>
				</Compatibility>
				<State>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="34" name="COMMAND_CLASS_APPLICATION_STATUS">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="37" name="COMMAND_CLASS_SWITCH_BINARY">
				<Compatibility />
				<State>
					<InNif>true</InNif>
				</State>
				<Instance index="1" />
				<Value type="bool" genre="user" instance="1" index="0" label="Switch" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="False">
					<Help>Turn On/Off Device</Help>
				</Value>
			</CommandClass>
			<CommandClass id="39" name="COMMAND_CLASS_SWITCH_ALL">
				<Compatibility />
				<State>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Switch All" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>Switch All Devices On/Off</Help>
					<Item label="Disabled" value="0" />
					<Item label="Off Enabled" value="1" />
					<Item label="On Enabled" value="2" />
					<Item label="On and Off Enabled" value="255" />
				</Value>
			</CommandClass>
			<CommandClass id="50" name="COMMAND_CLASS_METER">
				<Compatibility />
				<State>
					<CCVersion>3</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>2</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="decimal" genre="user" instance="1" index="0" label="Electric - kWh" units="kWh" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.999">
					<Help></Help>
				</Value>
				<Value type="decimal" genre="user" instance="1" index="2" label="Electric - W" units="W" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.0">
					<Help></Help>
				</Value>
				<Value type="bool" genre="user" instance="1" index="256" label="Exporting" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="False">
					<Help></Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="257" label="Reset" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help></Help>
				</Value>
			</CommandClass>
			<CommandClass id="90" name="COMMAND_CLASS_DEVICE_RESET_LOCALLY">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="91" name="COMMAND_CLASS_CENTRAL_SCENE">
				<Compatibility />
				<State>
					<CCVersion>3</CCVersion>
					<InNif>true</InNif>
					<SceneCount>3</SceneCount>
					<StaticRequests>2</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="int" genre="system" instance="1" index="0" label="Scene Count" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="2">
					<Help></Help>
				</Value>
				<Value type="int" genre="user" instance="1" index="1" label="Scene 1" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="0">
					<Help></Help>
				</Value>
				<Value type="int" genre="user" instance="1" index="2" label="Scene 2" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="0">
					<Help></Help>
				</Value>
				<Value type="int" genre="user" instance="1" index="3" label="Scene 3" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="0">
					<Help></Help>
				</Value>
				<Value type="int" genre="user" instance="1" index="256" label="Scene Count" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="3">
					<Help></Help>
				</Value>
				<Value type="int" genre="config" instance="1" index="257" label="Scene Reset Timeout" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="1000">
					<Help></Help>
				</Value>
			</CommandClass>
			<CommandClass id="94" name="COMMAND_CLASS_ZWAVEPLUS_INFO">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>6</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="byte" genre="system" instance="1" index="0" label="ZWave+ Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="1">
					<Help>ZWave+ Version Supported on the Device</Help>
				</Value>
				<Value type="short" genre="system" instance="1" index="1" label="InstallerIcon" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="1793">
					<Help>Icon File to use for the Installer Application</Help>
				</Value>
				<Value type="short" genre="system" instance="1" index="2" label="UserIcon" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="1793">
					<Help>Icon File to use for the User Application</Help>
				</Value>
			</CommandClass>
			<CommandClass id="112" name="COMMAND_CLASS_CONFIGURATION">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="config" instance="1" index="1" label="Power On State" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="2" vindex="0" size="1">
					<Help>When Power is restored Range: 0-2 Default: 0</Help>
					<Item label="Previous" value="0" />
					<Item label="On" value="1" />
					<Item label="Off" value="2" />
				</Value>
				<Value type="list" genre="config" instance="1" index="2" label="Invert Switch" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="1" vindex="0" size="1">
					<Help>Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up. Range: 0-1 Default: 0</Help>
					<Item label="Disabled" value="0" />
					<Item label="Enabled" value="1" />
				</Value>
				<Value type="short" genre="config" instance="1" index="3" label="Auto Off Timer" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="32767" value="0">
					<Help>Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started that is the duration of this setting. When the timer expires, the switch is turned off. Range: 0-32767 Default: 0</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="4" label="Association Behavior" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="15" value="15">
					<Help>When should the switch send commands to associated devices? 01 - local 02 - 3way 03 - 3way &amp; local 04 - z-wave hub 05 - z-wave hub &amp; local 06 - z-wave hub &amp; 3-way 07 - z-wave hub &amp; local &amp; 3way 08 - timer 09 - timer &amp; local 10 - timer &amp; 3-way 11 - timer &amp; 3-way &amp; local 12 - timer &amp; z-wave hub 13 - timer &amp; z-wave hub &amp; local 14 - timer &amp; z-wave hub &amp; 3-way 15 - all Range: 0-15 Default: 15</Help>
				</Value>
				<Value type="short" genre="config" instance="1" index="5" label="LED Indicator Color" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="170">
					<Help>This is the color of the LED strip. Range: 0 to 255 Default: 170</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="6" label="LED Indicator Intensity" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="10" value="5">
					<Help>This is the intensity of the LED strip. Range: 0-10 Default: 5</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="7" label="LED Indicator Intensity (When Off)" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="10" value="1">
					<Help>This is the intensity of the LED strip when the switch is off. This is useful for users to see the light switch location when the lights are off. Range: 0 - 10 Default: 0</Help>
				</Value>
				<Value type="int" genre="config" instance="1" index="8" label="LED Strip Effect" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="83823359" value="0">
					<Help>Please see website for documentation. Range: 0-83823359 Default: 0</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="10" label="Active Power Alerts" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="100" value="10">
					<Help>The power level change that will result in a new power report being sent. The value is a percentage of the previous report. 0 = disabled. Range: 0-100 Default: 10</Help>
				</Value>
				<Value type="short" genre="config" instance="1" index="11" label="Periodic Power + Energy Reports" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="32767" value="3600">
					<Help>Time period between consecutive power &amp; energy reports being sent (in seconds). The timer is reset after each report is sent. Range: 0 to 32767 Default: 3600</Help>
				</Value>
				<Value type="byte" genre="config" instance="1" index="12" label="Energy Reports" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="100" value="10">
					<Help>The energy level change that will result in a new energy report being sent. The value is a percentage of the previous report. Range: 0-100 Default: 10</Help>
				</Value>
			</CommandClass>
			<CommandClass id="114" name="COMMAND_CLASS_MANUFACTURER_SPECIFIC">
				<Compatibility />
				<State>
					<CCVersion>2</CCVersion>
					<InNif>true</InNif>
					<StaticRequests>0</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="int" genre="system" instance="1" index="0" label="Loaded Config Revision" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="6">
					<Help>Revision of the Config file currently loaded</Help>
				</Value>
				<Value type="int" genre="system" instance="1" index="1" label="Config File Revision" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="6">
					<Help>Revision of the Config file on the File System</Help>
				</Value>
				<Value type="int" genre="system" instance="1" index="2" label="Latest Available Config File Revision" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-2147483648" max="2147483647" value="6">
					<Help>Latest Revision of the Config file available for download</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="3" label="Device ID" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="">
					<Help>Manufacturer Specific Device ID/Model</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="4" label="Serial Number" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="101010101010101010101010101010101">
					<Help>Device Serial Number</Help>
				</Value>
			</CommandClass>
			<CommandClass id="115" name="COMMAND_CLASS_POWERLEVEL">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Powerlevel" units="dB" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>Output RF PowerLevel</Help>
					<Item label="Normal" value="0" />
					<Item label="-1dB" value="1" />
					<Item label="-2dB" value="2" />
					<Item label="-3dB" value="3" />
					<Item label="-4dB" value="4" />
					<Item label="-5dB" value="5" />
					<Item label="-6dB" value="6" />
					<Item label="-7dB" value="7" />
					<Item label="-8dB" value="8" />
					<Item label="-9dB" value="9" />
				</Value>
				<Value type="byte" genre="system" instance="1" index="1" label="Timeout" units="seconds" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="0">
					<Help>Timeout till the PowerLevel is reset to Normal</Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="2" label="Set Powerlevel" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help>Apply the Output PowerLevel and Timeout Values</Help>
				</Value>
				<Value type="byte" genre="system" instance="1" index="3" label="Test Node" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="255" value="0">
					<Help>Node to Perform a test against</Help>
				</Value>
				<Value type="list" genre="system" instance="1" index="4" label="Test Powerlevel" units="dB" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>PowerLevel to use for the Test</Help>
					<Item label="Normal" value="0" />
					<Item label="-1dB" value="1" />
					<Item label="-2dB" value="2" />
					<Item label="-3dB" value="3" />
					<Item label="-4dB" value="4" />
					<Item label="-5dB" value="5" />
					<Item label="-6dB" value="6" />
					<Item label="-7dB" value="7" />
					<Item label="-8dB" value="8" />
					<Item label="-9dB" value="9" />
				</Value>
				<Value type="short" genre="system" instance="1" index="5" label="Frame Count" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="0">
					<Help>How Many Messages to send to the Note for the Test</Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="6" label="Test" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help>Perform a PowerLevel Test against the a Node</Help>
				</Value>
				<Value type="button" genre="system" instance="1" index="7" label="Report" units="" read_only="false" write_only="true" verify_changes="false" poll_intensity="0" min="0" max="0">
					<Help>Get the results of the latest PowerLevel Test against a Node</Help>
				</Value>
				<Value type="list" genre="system" instance="1" index="8" label="Test Status" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>The Current Status of the last PowerNode Test Executed</Help>
					<Item label="Failed" value="0" />
					<Item label="Success" value="1" />
					<Item label="In Progress" value="2" />
				</Value>
				<Value type="short" genre="system" instance="1" index="9" label="Acked Frames" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="-32768" max="32767" value="0">
					<Help>Number of Messages successfully Acked by the Target Node</Help>
				</Value>
			</CommandClass>
			<CommandClass id="117" name="COMMAND_CLASS_PROTECTION">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Protection" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Help>Protect a device against unintentional control</Help>
					<Item label="Unprotected" value="0" />
					<Item label="Protection by Sequence" value="1" />
					<Item label="No Operation Possible" value="2" />
				</Value>
			</CommandClass>
			<CommandClass id="133" name="COMMAND_CLASS_ASSOCIATION">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Associations num_groups="2">
					<Group index="1" max_associations="5" label="Lifeline" auto="true">
						<Node id="1" />
					</Group>
					<Group index="2" max_associations="5" label="Basic_Set" auto="false" />
				</Associations>
			</CommandClass>
			<CommandClass id="134" name="COMMAND_CLASS_VERSION">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="string" genre="system" instance="1" index="0" label="Library Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="3">
					<Help>Z-Wave Library Version</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="1" label="Protocol Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="6.04">
					<Help>Z-Wave Protocol Version</Help>
				</Value>
				<Value type="string" genre="system" instance="1" index="2" label="Application Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="1.09">
					<Help>Application Version</Help>
				</Value>
			</CommandClass>
			<CommandClass id="152" name="COMMAND_CLASS_SECURITY">
				<Compatibility />
				<State>
					<InNif>true</InNif>
					<StaticRequests>4</StaticRequests>
				</State>
				<Instance index="1" />
				<Value type="bool" genre="system" instance="1" index="0" label="Secured" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="False">
					<Help>Is Communication with Device Encrypted</Help>
				</Value>
			</CommandClass>
		</CommandClasses>
	</Node>