highRes-vs-upright[3d-printed-parts]
17 lines
Actuator assembly tools (nut tool, band tool, and band tool cover): actuator_assembly_tools.stl
Actuator assembly tools (nut tool, band tool, and band tool cover): actuator_assembly_tools.stl
Lens tool: lens_tool.stl
Lens tool: lens_tool.stl
Main body: main_body.stl - The smart brim may require custom print settings.
Main body: main_body.stl - The smart brim may require custom print settings.
3 cable tidy caps: cable_tidies.stl
3 cable tidy caps: cable_tidies.stl
Sample clips: sample_clips.stl
Sample clips: sample_clips.stl
Microscope stand: microscope_stand.stl
Microscope stand: microscope_stand.stl
Electronics drawer: electronics_drawer-pi4_sanga_stack_11mm.stl - This electronics drawer is for a Pi 4 and HAT-style Sangaboard with 11mm tall headers. For all other combinations of electronics, refer to the customisation page
Electronics drawer: electronics_drawer-pi4_sanga_stack_11mm.stl - This electronics drawer is for a Pi 4 and HAT-style Sangaboard with 11mm tall headers. For all other combinations of electronics, refer to the customisation page
3 small gears: small_gears.stl
3 small gears: small_gears.stl
Illumination dovetail: illumination_dovetail.stl
Separate z-actuator: separate_z_actuator.stl - The smart brim may require custom print settings.
Condenser arm: condenser.stl
Upright z-actuator mount: upright_z_actuator_mount.stl
4 feet: upright_feet.stl
4 large gears: upright_large_gears.stl
Upright condenser: upright_condenser.stl - The condenser may require custom print settings as used for the smart brim.
Upright condenser platform: upright_condenser_platform.stl
Condenser board spacer: condenser_board_spacer.stl
Condenser board spacer: condenser_board_spacer.stl
Condenser lid: condenser_lid.stl
Lens spacer: lens_spacer_picamera_2_pilens.stl - This must be printed in black! info
Illumination thumbscrew: illumination_thumbscrew.stl
pi camera platform: camera_platform_picamera_2_pilens.stl
3 large gears: large_gears.stl
3 feet: feet.stl
Optics module: optics_picamera_2_rms_f50d13.stl - This must be printed in black! info
pi camera cover: picamera_2_cover.stl