Confronta il testo

Trova la differenza tra due file di testo

Visualizzazione

Layout
Livello di dettaglio
Sintassi

Elaborazione

Untitled diff

Creato Il diff non scade mai
127 rimozioni
158 linee
90 aggiunte
130 linee
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
*/


/dts-v1/;
/dts-v1/;


#include "stm32mp157.dtsi"
#include "stm32mp157c-dk2.dts"
#include "stm32mp15xc.dtsi"
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxac-pinctrl.dtsi"
#include "stm32mp15xx-dkx.dtsi"
#include <dt-bindings/rtc/rtc-stm32.h>


/ {
/ {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
model = "STMicroelectronics STM32MP157C-DK2 configured to run M4 examples";
compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
compatible = "st,stm32mp157c-dk2-m4-examples", "st,stm32mp157c-dk2", "st,stm32mp157";
};


aliases {
&adc {
serial0 = &uart4;
status = "disabled";
serial1 = &usart3;
serial2 = &uart7;
serial3 = &usart2;
};
};


chosen {
&dac {
stdout-path = "serial0:115200n8";
status = "disabled";
};
};


wifi_pwrseq: wifi-pwrseq {
&dma2 {
compatible = "mmc-pwrseq-simple";
status = "disabled";
reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
};
};

&dmamux1 {
dma-masters = <&dma1>;
dma-channels = <8>;
};
};


&cryp1 {
&m4_adc {
vref-supply = <&vrefbuf>;
status = "okay";
status = "okay";
};
};


&dsi {
&m4_dac {
vref-supply = <&vrefbuf>;
status = "okay";
status = "okay";

ports {
port@0 {
reg = <0>;
dsi_in: endpoint {
remote-endpoint = <&ltdc_ep1_out>;
};
};
};


port@1 {
&m4_dma2 {
reg = <1>;
status = "okay";
dsi_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};


panel_otm8009a: panel-otm8009a@0 {
&m4_crc2 {
compatible = "orisetech,otm8009a";
reg = <0>;
reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
power-supply = <&v3v3>;
status = "okay";
status = "okay";

port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};

&m4_cryp2 {
status = "okay";
};
};

&m4_hash2 {
status = "okay";
};
};


&i2c1 {
&m4_i2c5 {
touchscreen@2a {
pinctrl-names = "default";
compatible = "focaltech,ft6236";
pinctrl-0 = <&m4_i2c5_pins_a>;
reg = <0x2a>;
interrupts = <2 2>;
interrupt-parent = <&gpiof>;
interrupt-controller;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
panel = <&panel_otm8009a>;
vcc-supply = <&v3v3>;
status = "okay";
status = "okay";
};
};
touchscreen@38 {

compatible = "focaltech,ft6236";
&m4_rng2 {
reg = <0x38>;
interrupts = <2 2>;
interrupt-parent = <&gpiof>;
interrupt-controller;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
panel = <&panel_otm8009a>;
vcc-supply = <&v3v3>;
status = "okay";
status = "okay";
};
};

&m4_rproc {
m4_system_resources {
status = "okay";

button {
compatible = "rproc-srm-dev";
interrupt-parent = <&gpioa>;
interrupts = <14 2>;
interrupt-names = "irq";
status = "okay";
};
};


&ltdc {
m4_led: m4_led {
compatible = "rproc-srm-dev";
pinctrl-names = "default";
pinctrl-0 = <&m4_leds_orange_pins>;
status = "okay";
status = "okay";

port {
ltdc_ep1_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_in>;
};
};
};
};
};
};


&rtc {
&m4_spi4 {
st,lsco = <RTC_OUT2_RMP>;
pinctrl-0 = <&rtc_out2_rmp_pins_a>;
pinctrl-names = "default";
pinctrl-names = "default";
pinctrl-0 = <&m4_spi4_pins_a>;
status = "okay";
};
};


/* Wifi */

&sdmmc2 {
&m4_timers2 {
arm,primecell-periphid = <0x10153180>;
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc2_b4_pins_a>;
pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
non-removable;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&v3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
status = "okay";

brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};

&m4_timers1 {
pinctrl-names = "default";
pinctrl-0 = <&m4_pwm1_pins_a_ch1>;
status = "okay";
};
};


/* Bluetooth */
&m4_uart7 {
&usart2 {
pinctrl-names = "default";
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&m4_uart7_pins_a>;
pinctrl-0 = <&usart2_pins_c>;
pinctrl-1 = <&usart2_sleep_pins_c>;
pinctrl-2 = <&usart2_idle_pins_c>;
uart-has-rtscts;
status = "okay";
status = "okay";
};


bluetooth {
&pinctrl {
shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
m4_leds_orange_pins: m4-leds-orange-0 {
compatible = "brcm,bcm43438-bt";
pins {
max-speed = <3000000>;
pinmux = <STM32_PINMUX('H', 7, RSVD)>;
vbat-supply = <&v3v3>;
};
vddio-supply = <&v3v3>;
};

m4_pwm1_pins_a_ch1: m4-pwm1-0-ch1 {
pins {
pinmux = <STM32_PINMUX('E', 9, RSVD)>;
};
};
};
};
};


&timers1 {
status = "disabled";
};

Diff salvati