Comparar texto

Encontre a diferença entre dois arquivos de texto

Editor live

Ocultar espaços em branco

Recolher inalteradas

Sem quebra de linha

Layout

Nível de detalhe

Estilos de texto

Realce de sintaxe

Diffchecker Desktop A maneira mais segura de usar o Diffchecker. Obtenha o aplicativo Diffchecker Desktop: seus diffs nunca saem do seu computador!Obter Desktop

proxmox host vs kvm

Criado há 7 anosO diff nunca expira

71 remoções

Linhas
Total
Removido

Caracteres
Total
Removido

Para continuar usando este recurso, atualize para Diffchecker Pro Ver preços

89 linhas

43 adições

Linhas
Total
Adicionado

Caracteres
Total
Adicionado

Para continuar usando este recurso, atualize para Diffchecker Pro Ver preços

66 linhas

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.21-3-pve] (local build)

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.80-0-vanilla] (local build)

=== START OF INFORMATION SECTION ===

Model Family: Seagate Constellation ES.3

Device Model: QEMU HARDDISK

Device Model: MB4000GCWDC

Serial Number: QM00007

Serial Number: S1Z1C053

Firmware Version: 2.5+

LU WWN Device Id: 5 000c50 08bdd61ca

Firmware Version: HPGH

User Capacity: 4,000,787,030,016 bytes [4.00 TB]

Sector Size: 512 bytes logical/physical

Rotation Rate: 7200 rpm

Device is: Not in smartctl database [for details use: -P showall]

Form Factor: 3.5 inches

ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000

Device is: In smartctl database [for details use: -P show]

Local Time is: Mon Oct 21 01:32:10 2019 UTC

ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is: Sun Oct 20 16:38:20 2019 HDT

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 592) seconds.

data collection: ( 288) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

capabilities: (0x19) SMART execute Offline immediate.

Auto Offline data collection on/off support.

No Auto Offline data collection support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

No Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

No General Purpose Logging support.

Short self-test routine

recommended polling time: ( 2) minutes.

Extended self-test routine

recommended polling time: ( 473) minutes.

recommended polling time: ( 54) minutes.

Conveyance self-test routine

recommended polling time: ( 3) minutes.

SCT capabilities: (0x103d) SCT Status supported.

SCT Error Recovery Control supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 10

SMART Attributes Data Structure revision number: 1

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 100 100 044 Pre-fail Always - 293798

1 Raw_Read_Error_Rate 0x0003 100 100 006 Pre-fail Always - 0

3 Spin_Up_Time 0x0003 098 098 070 Pre-fail Always - 0

3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 16

5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0

4 Start_Stop_Count 0x0002 100 100 020 Old_age Always - 100

7 Seek_Error_Rate 0x000f 063 060 045 Pre-fail Always - 2414056

5 Reallocated_Sector_Ct 0x0003 100 100 036 Pre-fail Always - 0

9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7

9 Power_On_Hours 0x0003 100 100 000 Pre-fail Always - 1

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 0

180 Unknown_HDD_Attribute 0x003b 100 100 030 Pre-fail Always - 3718107

190 Airflow_Temperature_Cel 0x0003 069 069 050 Pre-fail Always - 31 (Min/Max 31/31)

194 Temperature_Celsius 0x0022 040 046 000 Old_age Always - 40 (0 25 0 0 0)

196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed without error 00% 7 -

# 1 Short offline Completed without error 00% 4660 -

# 2 Short offline Completed without error 00% 6 -

SMART Selective self-test log data structure revision number 1

Selective Self-tests/Logging not supported

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

Diferenças salvas

Texto original

Abrir arquivo

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.21-3-pve] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Constellation ES.3
Device Model:     MB4000GCWDC
Serial Number:    S1Z1C053
LU WWN Device Id: 5 000c50 08bdd61ca
Firmware Version: HPGH
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Oct 20 16:38:20 2019 HDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  592) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 473) minutes.
Conveyance self-test routine
recommended polling time:        (   3) minutes.
SCT capabilities:              (0x103d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   044    Pre-fail  Always       -       293798
  3 Spin_Up_Time            0x0003   098   098   070    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   063   060   045    Pre-fail  Always       -       2414056
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       7
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
180 Unknown_HDD_Attribute   0x003b   100   100   030    Pre-fail  Always       -       3718107
194 Temperature_Celsius     0x0022   040   046   000    Old_age   Always       -       40 (0 25 0 0 0)
196 Reallocated_Event_Count 0x0033   100   100   010    Pre-fail  Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         7         -
# 2  Short offline       Completed without error       00%         6         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Texto alterado

Abrir arquivo

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.80-0-vanilla] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     QEMU HARDDISK
Serial Number:    QM00007
Firmware Version: 2.5+
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
Local Time is:    Mon Oct 21 01:32:10 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  288) seconds.
Offline data collection
capabilities:                    (0x19) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  54) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       16
  4 Start_Stop_Count        0x0002   100   100   020    Old_age   Always       -       100
  5 Reallocated_Sector_Ct   0x0003   100   100   036    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0003   100   100   000    Pre-fail  Always       -       1
 12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       0
190 Airflow_Temperature_Cel 0x0003   069   069   050    Pre-fail  Always       -       31 (Min/Max 31/31)

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4660         -

Selective Self-tests/Logging not supported