proxmox host vs kvm
建立於 差異永不過期
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.21-3-pve] (local build)
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.80-0-vanilla] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES.3
Device Model: QEMU HARDDISK
Device Model: MB4000GCWDC
Serial Number: QM00007
Serial Number: S1Z1C053
Firmware Version: 2.5+
LU WWN Device Id: 5 000c50 08bdd61ca
Firmware Version: HPGH
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Size: 512 bytes logical/physical
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
Form Factor: 3.5 inches
ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
Device is: In smartctl database [for details use: -P show]
Local Time is: Mon Oct 21 01:32:10 2019 UTC
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Oct 20 16:38:20 2019 HDT
SMART support is: Available - device has SMART capability.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART overall-health self-assessment test result: PASSED
General SMART Values:
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
was completed without error.
Auto Offline Data Collection: Enabled.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
without error or no self-test has ever
been run.
been run.
Total time to complete Offline
Total time to complete Offline
data collection: ( 592) seconds.
data collection: ( 288) seconds.
Offline data collection
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
capabilities: (0x19) SMART execute Offline immediate.
Auto Offline data collection on/off support.
No Auto Offline data collection support.
Suspend Offline collection upon new
Suspend Offline collection upon new
command.
command.
Offline surface scan supported.
Offline surface scan supported.
Self-test supported.
Self-test supported.
Conveyance Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
power-saving mode.
Supports SMART auto save timer.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
No General Purpose Logging support.
Short self-test routine
Short self-test routine
recommended polling time: ( 2) minutes.
recommended polling time: ( 2) minutes.
Extended self-test routine
Extended self-test routine
recommended polling time: ( 473) minutes.
recommended polling time: ( 54) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 044 Pre-fail Always - 293798
1 Raw_Read_Error_Rate 0x0003 100 100 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 098 098 070 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 16
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
4 Start_Stop_Count 0x0002 100 100 020 Old_age Always - 100
7 Seek_Error_Rate 0x000f 063 060 045 Pre-fail Always - 2414056
5 Reallocated_Sector_Ct 0x0003 100 100 036 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7
9 Power_On_Hours 0x0003 100 100 000 Pre-fail Always - 1
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 0
180 Unknown_HDD_Attribute 0x003b 100 100 030 Pre-fail Always - 3718107
190 Airflow_Temperature_Cel 0x0003 069 069 050 Pre-fail Always - 31 (Min/Max 31/31)
194 Temperature_Celsius 0x0022 040 046 000 Old_age Always - 40 (0 25 0 0 0)
196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0
SMART Error Log Version: 1
SMART Error Log Version: 1
No Errors Logged
No Errors Logged
SMART Self-test log structure revision number 1
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7 -
# 1 Short offline Completed without error 00% 4660 -
# 2 Short offline Completed without error 00% 6 -
SMART Selective self-test log data structure revision number 1
Selective Self-tests/Logging not supported
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.