Compare text

Find the difference between two text files
Real-time diff
Unified diff
Collapse lines
Highlight change
Syntax highlighting
Tools

Makefile

Created Diff never expires
2 removals
388 lines
2 additions
388 lines
#
#
# Makefile
# Makefile
#
#
# (c) 2012-2020 by Markus Reschke
# (c) 2012-2020 by Markus Reschke
# based on code from Markus Frejek and Karl-Heinz Kübbeler
# based on code from Markus Frejek and Karl-Heinz Kübbeler
#
#


PROJECT = ComponentTester
PROJECT = ComponentTester




#
#
# MCU settings
# MCU settings
# - Edit to match your setup!
# - Edit to match your setup!
#
#


# avr-gcc: MCU model
# avr-gcc: MCU model
# - ATmega 328/328P : atmega328
# - ATmega 328/328P : atmega328
# - ATmega 328PB : atmega328pb
# - ATmega 328PB : atmega328pb
# - ATmega 324P/324PA : atmega324p
# - ATmega 324P/324PA : atmega324p
# - ATmega 640 : atmega640
# - ATmega 640 : atmega640
# - ATmega 644/644P/644PA : atmega644
# - ATmega 644/644P/644PA : atmega644
# - ATmega 1280 : atmega1280
# - ATmega 1280 : atmega1280
# - ATmega 1284/1284P : atmega1284
# - ATmega 1284/1284P : atmega1284
# - ATmega 2560 : atmega2560
# - ATmega 2560 : atmega2560
MCU = atmega644
MCU = atmega644


# MCU freqency:
# MCU freqency:
# - 1MHz : 1
# - 1MHz : 1
# - 8MHz : 8
# - 8MHz : 8
# - 16MHz : 16
# - 16MHz : 16
# - 20MHz : 20
# - 20MHz : 20
FREQ = 8
FREQ = 8


# oscillator type
# oscillator type
# - internal RC oscillator : RC
# - internal RC oscillator : RC
# - external full swing crystal : Crystal
# - external full swing crystal : Crystal
# - external low power crystal : LowPower
# - external low power crystal : LowPower
OSCILLATOR = Crystal
OSCILLATOR = Crystal


# oscillator start-up cycles
# oscillator start-up cycles
# - Crystal and LowPower could also be 1024 or 256 based on fuse settings
# - Crystal and LowPower could also be 1024 or 256 based on fuse settings
ifeq (${OSCILLATOR},RC)
ifeq (${OSCILLATOR},RC)
OSC_STARTUP = 6
OSC_STARTUP = 6
endif
endif
ifeq (${OSCILLATOR},Crystal)
ifeq (${OSCILLATOR},Crystal)
OSC_STARTUP = 16384
OSC_STARTUP = 16384
endif
endif
ifeq (${OSCILLATOR},LowPower)
ifeq (${OSCILLATOR},LowPower)
OSC_STARTUP = 16384
OSC_STARTUP = 16384
endif
endif




#
#
# avrdude settings
# avrdude settings
# - Edit to match your setup!
# - Edit to match your setup!
#
#


# avrdude: part number of MCU
# avrdude: part number of MCU
# - ATmega 328 : m328
# - ATmega 328 : m328
# - ATmega 328P : m328p
# - ATmega 328P : m328p
# - ATmega 328PB : m328pb
# - ATmega 328PB : m328pb
# - ATmega 324P : m324p
# - ATmega 324P : m324p
# - ATmega 324PA : m324pa
# - ATmega 324PA : m324pa
# - ATmega 640 : m640
# - ATmega 640 : m640
# - ATmega 644 : m644
# - ATmega 644 : m644
# - ATmega 644P : m644p
# - ATmega 644P : m644p
# - ATmega 644PA : m644p
# - ATmega 644PA : m644p
# - ATmega 1280 : m1280
# - ATmega 1280 : m1280
# - ATmega 1284 : m1284
# - ATmega 1284 : m1284
# - ATmega 1284P : m1284p
# - ATmega 1284P : m1284p
# - ATmega 2560 : m2560
# - ATmega 2560 : m2560
PARTNO = m644p
PARTNO = m644p


# avrdude: ISP programmer, port and options
# avrdude: ISP programmer, port and options


# Arduino as ISP
# Arduino as ISP
#PROGRAMMER = stk500v1
#PROGRAMMER = stk500v1
#PORT = /dev/ttyACM0
#PORT = /dev/ttyACM0
#OPTIONS = -b 19200
#OPTIONS = -b 19200


# Bus Pirate
# Bus Pirate
#PROGRAMMER = buspirate
#PROGRAMMER = buspirate
#PORT = /dev/bus_pirate
#PORT = /dev/bus_pirate
#OPTIONS = -B 10.0
#OPTIONS = -B 10.0


# Diamex ALL-AVR/AVR-Prog
# Diamex ALL-AVR/AVR-Prog
#PROGRAMMER = avrispmkII
#PROGRAMMER = avrispmkII
#PORT = usb
#PORT = usb
#OPTIONS = -B 1.0
OPTIONS = -B 1.0


# Pololu USB AVR Programmer
# Pololu USB AVR Programmer
#PROGRAMMER = stk500v2
#PROGRAMMER = stk500v2
#PORT = /dev/ttyACM0
#PORT = /dev/ttyACM0
#OPTIONS = -B 1.0
#OPTIONS = -B 1.0


# USBasp
# USBasp
PROGRAMMER = usbasp
PROGRAMMER = usbasp
PORT = usb
PORT = usb
OPTIONS = -B 20
OPTIONS = -B 20


# USBtinyISP
# USBtinyISP
#PROGRAMMER = usbtiny
#PROGRAMMER = usbtiny
#PORT = usb
#PORT = usb
#OPTIONS = -B 5.0
#OPTIONS = -B 5.0


# Arduino Uno bootloader via serial/USB
# Arduino Uno bootloader via serial/USB
#PROGRAMMER = arduino
#PROGRAMMER = arduino
#PORT = /dev/ttyACM0
#PORT = /dev/ttyACM0
#OPTIONS = -D -b 115200
#OPTIONS = -D -b 115200


# Arduino Mega2560 bootloader via serial/USB
# Arduino Mega2560 bootloader via serial/USB
#PROGRAMMER = wiring
#PROGRAMMER = wiring
#PORT = /dev/ttyACM0
#PORT = /dev/ttyACM0
#OPTIONS = -D -b 115200
#OPTIONS = -D -b 115200




#
#
# global settings
# global settings
#
#


# project name
# project name
NAME = ComponentTesterAnis
NAME = ComponentTester


# name and version based on directory name
# name and version based on directory name
DIST = $(notdir ${CURDIR})
DIST = $(notdir ${CURDIR})


# compiler flags
# compiler flags
CC = avr-gcc
CC = avr-gcc
CPP = avr-g++
CPP = avr-g++
CFLAGS = -mmcu=${MCU} -Wall -I. -Ibitmaps
CFLAGS = -mmcu=${MCU} -Wall -I. -Ibitmaps
CFLAGS += -DF_CPU=${FREQ}000000UL
CFLAGS += -DF_CPU=${FREQ}000000UL
CFLAGS += -DOSC_STARTUP=${OSC_STARTUP}
CFLAGS += -DOSC_STARTUP=${OSC_STARTUP}
CFLAGS += -gdwarf-2 -std=gnu99 -Os -mcall-prologues
CFLAGS += -gdwarf-2 -std=gnu99 -Os -mcall-prologues
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
#CFLAGS += -flto
#CFLAGS += -flto
CFLAGS += -MD -MP -MT $(*F).o -MF dep/$(@F).d
CFLAGS += -MD -MP -MT $(*F).o -MF dep/$(@F).d


# linker flags
# linker flags
LDFLAGS = -mmcu=${MCU} -Wl,-Map=${NAME}.map
LDFLAGS = -mmcu=${MCU} -Wl,-Map=${NAME}.map


# hex file flags
# hex file flags
HEX_FLASH_FLAGS = -R .eeprom -R .fuse -R .lock -R .signature
HEX_FLASH_FLAGS = -R .eeprom -R .fuse -R .lock -R .signature
HEX_EEPROM_FLAGS = -j .eeprom
HEX_EEPROM_FLAGS = -j .eeprom
HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load"
HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load"
HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings
HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings


# header files
# header files
HEADERS = config.h config_328.h config_644.h config_1280.h
HEADERS = config.h config_328.h config_644.h config_1280.h
HEADERS += colors.h common.h functions.h variables.h $(wildcard var_*.h)
HEADERS += colors.h common.h functions.h variables.h $(wildcard var_*.h)
HEADERS += OneWire.h ADS7843.h
HEADERS += OneWire.h ADS7843.h
HEADERS += HD44780.h ILI9163.h ILI9341.h ILI9481.h ILI9486.h ILI9488.h
HEADERS += HD44780.h ILI9163.h ILI9341.h ILI9481.h ILI9486.h ILI9488.h
HEADERS += PCD8544.h PCF8814.h SH1106.h SSD1306.h
HEADERS += PCD8544.h PCF8814.h SH1106.h SSD1306.h
HEADERS += ST7036.h ST7565R.h ST7735.h ST7920.h STE2007.h
HEADERS += ST7036.h ST7565R.h ST7735.h ST7920.h STE2007.h


# objects
# objects
OBJECTS_C = main.o user.o pause.o adjust.o ADC.o probes.o display.o
OBJECTS_C = main.o user.o pause.o adjust.o ADC.o probes.o display.o
OBJECTS_C += resistor.o cap.o semi.o inductor.o
OBJECTS_C += resistor.o cap.o semi.o inductor.o
OBJECTS_C += tools_misc.o tools_signal.o tools_LC_Meter.o
OBJECTS_C += tools_misc.o tools_signal.o tools_LC_Meter.o
OBJECTS_C += SPI.o I2C.o serial.o commands.o OneWire.o
OBJECTS_C += SPI.o I2C.o serial.o commands.o OneWire.o
OBJECTS_C += IR_RX.o IR_TX.o DHTxx.o ADS7843.o
OBJECTS_C += IR_RX.o IR_TX.o DHTxx.o ADS7843.o
OBJECTS_C += HD44780.o ILI9163.o ILI9341.o ILI9481.o ILI9486.o ILI9488.o
OBJECTS_C += HD44780.o ILI9163.o ILI9341.o ILI9481.o ILI9486.o ILI9488.o
OBJECTS_C += PCD8544.o PCF8814.o SH1106.o SSD1306.o
OBJECTS_C += PCD8544.o PCF8814.o SH1106.o SSD1306.o
OBJECTS_C += ST7036.o ST7565R.o ST7735.o ST7920.o
OBJECTS_C += ST7036.o ST7565R.o ST7735.o ST7920.o
OBJECTS_C += STE2007.o VT100.o TestDisplay.o
OBJECTS_C += STE2007.o VT100.o TestDisplay.o
OBJECTS_S = wait.o
OBJECTS_S = wait.o
OBJECTS = ${OBJECTS_C} ${OBJECTS_S}
OBJECTS = ${OBJECTS_C} ${OBJECTS_S}




#
#
# build
# build
#
#


all: ${NAME} ${NAME}.hex ${NAME}.eep ${NAME}.lss size
all: ${NAME} ${NAME}.hex ${NAME}.eep ${NAME}.lss size




#
#
# link
# link
#
#


# link firmware
# link firmware
$(NAME): ${OBJECTS}
$(NAME): ${OBJECTS}
${CC} ${LDFLAGS} ${OBJECTS} ${LIBDIRS} ${LIBS} -o ${NAME}
${CC} ${LDFLAGS} ${OBJECTS} ${LIBDIRS} ${LIBS} -o ${NAME}


# create hex file of firmware
# create hex file of firmware
%.hex: ${NAME}
%.hex: ${NAME}
avr-objcopy -O ihex ${HEX_FLASH_FLAGS} $< $@
avr-objcopy -O ihex ${HEX_FLASH_FLAGS} $< $@


# create hex file of EEPROM data
# create hex file of EEPROM data
%.eep: ${NAME}
%.eep: ${NAME}
-avr-objcopy ${HEX_EEPROM_FLAGS} -O ihex $< $@ || exit 0
-avr-objcopy ${HEX_EEPROM_FLAGS} -O ihex $< $@ || exit 0


# create dump of firmware
# create dump of firmware
%.lss: ${NAME}
%.lss: ${NAME}
avr-objdump -h -S $< > $@
avr-objdump -h -S $< > $@


# output size of firmware and stuff
# output size of firmware and stuff
size: ${NAME}
size: ${NAME}
@echo
@echo
@avr-size -C --mcu=${MCU} $<
@avr-size -C --mcu=${MCU} $<




#
#
# compile source files
# compile source files
#
#


# rule for all c-files
# rule for all c-files
${OBJECTS_C}: %.o: %.c ${HEADERS} ${MAKEFILE_LIST}
${OBJECTS_C}: %.o: %.c ${HEADERS} ${MAKEFILE_LIST}
${CC} ${CFLAGS} -c ${@:.o=.c}
${CC} ${CFLAGS} -c ${@:.o=.c}


# rule for all S-files
# rule for all S-files
${OBJECTS_S}: %.o: %.S ${HEADERS} ${MAKEFILE_LIST}
${OBJECTS_S}: %.o: %.S ${HEADERS} ${MAKEFILE_LIST}
${CC} ${CFLAGS} -c ${@:.o=.S}
${CC} ${CFLAGS} -c ${@:.o=.S}


# external dependencies
# external dependencies
-include $(shell mkdir dep 2>/dev/null) $(wildcard dep/*)
-include $(shell mkdir dep 2>/dev/null) $(wildcard dep/*)




#
#
# extras
# extras
#
#


# program firmware and EEPROM data
# program firmware and EEPROM data
upload: ${NAME} ${NAME}.hex ${NAME}.eep ${NAME}.lss size
upload: ${NAME} ${NAME}.hex ${NAME}.eep ${NAME}.lss size
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} \
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} \
-U flash:w:./${NAME}.hex:a -U eeprom:w:./${NAME}.eep:a
-U flash:w:./${NAME}.hex:a -U eeprom:w:./${NAME}.eep:a


# program firmware only
# program firmware only
prog_fw: ${NAME} ${NAME}.hex ${NAME}.lss size
prog_fw: ${NAME} ${NAME}.hex ${NAME}.lss size
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} \
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} \
-U flash:w:./${NAME}.hex:a
-U flash:w:./${NAME}.hex:a


# program EEPROM data only
# program EEPROM data only
prog_ee: ${NAME} ${NAME}.eep ${NAME}.lss size
prog_ee: ${NAME} ${NAME}.eep ${NAME}.lss size
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} \
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} \
-U eeprom:w:./${NAME}.eep:a
-U eeprom:w:./${NAME}.eep:a


# create distribution package
# create distribution package
dist:
dist:
rm -f *.tgz
rm -f *.tgz
cd ..; tar -czf ${DIST}/${DIST}.tgz \
cd ..; tar -czf ${DIST}/${DIST}.tgz \
${DIST}/*.h ${DIST}/*.c ${DIST}/*.S ${DIST}/bitmaps/*.h \
${DIST}/*.h ${DIST}/*.c ${DIST}/*.S ${DIST}/bitmaps/*.h \
${DIST}/Makefile ${DIST}/README ${DIST}/CHANGES \
${DIST}/Makefile ${DIST}/README ${DIST}/CHANGES \
${DIST}/README.de ${DIST}/CHANGES.de ${DIST}/Clones \
${DIST}/README.de ${DIST}/CHANGES.de ${DIST}/Clones \
${DIST}/*.pdf
${DIST}/*.pdf


# clean up
# clean up
clean:
clean:
-rm -rf ${OBJECTS} ${NAME} dep/* *.tgz
-rm -rf ${OBJECTS} ${NAME} dep/* *.tgz
-rm -rf ${NAME}.hex ${NAME}.eep ${NAME}.lss ${NAME}.map
-rm -rf ${NAME}.hex ${NAME}.eep ${NAME}.lss ${NAME}.map




#
#
# MCU fuses
# MCU fuses
#
#


# ATmega 328/328P
# ATmega 328/328P
ifeq (${MCU},atmega328)
ifeq (${MCU},atmega328)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 328PB
# ATmega 328PB
ifeq (${MCU},atmega328pb)
ifeq (${MCU},atmega328pb)
FAMILY = atmega328pb
FAMILY = atmega328pb
endif
endif


# ATmega 324P/324PA
# ATmega 324P/324PA
ifeq (${MCU},atmega324p)
ifeq (${MCU},atmega324p)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 640
# ATmega 640
ifeq (${MCU},atmega640)
ifeq (${MCU},atmega640)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 644/644P/644PA
# ATmega 644/644P/644PA
ifeq (${MCU},atmega644)
ifeq (${MCU},atmega644)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 1280
# ATmega 1280
ifeq (${MCU},atmega1280)
ifeq (${MCU},atmega1280)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 1284/1284P
# ATmega 1284/1284P
ifeq (${MCU},atmega1284)
ifeq (${MCU},atmega1284)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 2560
# ATmega 2560
ifeq (${MCU},atmega2560)
ifeq (${MCU},atmega2560)
FAMILY = atmega328_324_640
FAMILY = atmega328_324_640
endif
endif


# ATmega 328/324/640/644/1280/1284/2560
# ATmega 328/324/640/644/1280/1284/2560
ifeq (${FAMILY},atmega328_324_640)
ifeq (${FAMILY},atmega328_324_640)
# high byte: use default settings, disable JTAG
# high byte: use default settings, disable JTAG
HFUSE = -U hfuse:w:0xd9:m
HFUSE = -U hfuse:w:0xd9:m
# extended byte: BOD level 4.3V
# extended byte: BOD level 4.3V
EFUSE = -U efuse:w:0xfc:m
EFUSE = -U efuse:w:0xfc:m
# low byte: clock settings
# low byte: clock settings
ifeq (${FREQ},1)
ifeq (${FREQ},1)
# internal RC oscillator (8MHz) and /1 clock divider
# internal RC oscillator (8MHz) and /1 clock divider
LFUSE_RC = -U lfuse:w:0x62:m
LFUSE_RC = -U lfuse:w:0x62:m
# external 8MHz full swing crystal and /8 clock divider
# external 8MHz full swing crystal and /8 clock divider
LFUSE_CRYSTAL = -U lfuse:w:0x77:m
LFUSE_CRYSTAL = -U lfuse:w:0x77:m
# external 8MHz low power crystal and /8 clock divider
# external 8MHz low power crystal and /8 clock divider
LFUSE_LOWPOWER = -U lfuse:w:0x7f:m
LFUSE_LOWPOWER = -U lfuse:w:0x7f:m
endif
endif
ifeq (${FREQ},8)
ifeq (${FREQ},8)
# internal RC oscillator (8MHz) and /1 clock divider
# internal RC oscillator (8MHz) and /1 clock divider
LFUSE_RC = -U lfuse:w:0xe2:m
LFUSE_RC = -U lfuse:w:0xe2:m
# external 8MHz full swing crystal and /1 clock divider
# external 8MHz full swing crystal and /1 clock divider
LFUSE_CRYSTAL = -U lfuse:w:0xf7:m
LFUSE_CRYSTAL = -U lfuse:w:0xf7:m
# external 8MHz low power crystal and /1 clock divider
# external 8MHz low power crystal and /1 clock divider
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
endif
endif
ifeq (${FREQ},16)
ifeq (${FREQ},16)
# internal RC oscillator (8MHz) not possible
# internal RC oscillator (8MHz) not possible
LFUSE_RC =
LFUSE_RC =
# external 16MHz full swing crystal and /1 clock divider
# external 16MHz full swing crystal and /1 clock divider
LFUSE_CRYSTAL = -U lfuse:w:0xf7:m
LFUSE_CRYSTAL = -U lfuse:w:0xf7:m
# external 16MHz low power crystal and /1 clock divider
# external 16MHz low power crystal and /1 clock divider
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
endif
endif
ifeq (${FREQ},20)
ifeq (${FREQ},20)
# internal RC oscillator (8MHz) not possible
# internal RC oscillator (8MHz) not possible
LFUSE_RC =
LFUSE_RC =
# external 20MHz full swing crystal and /1 clock divider
# external 20MHz full swing crystal and /1 clock divider
LFUSE_CRYSTAL = -U lfuse:w:0xf7:m
LFUSE_CRYSTAL = -U lfuse:w:0xf7:m
# external 20MHz low power crystal and /1 clock divider
# external 20MHz low power crystal and /1 clock divider
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
endif
endif
endif
endif


# ATmega 328PB
# ATmega 328PB
ifeq (${FAMILY},atmega328pb)
ifeq (${FAMILY},atmega328pb)
# high byte: use default settings
# high byte: use default settings
HFUSE = -U hfuse:w:0xd9:m
HFUSE = -U hfuse:w:0xd9:m
# extended byte: BOD level 4.3V, CFD disabled
# extended byte: BOD level 4.3V, CFD disabled
EFUSE = -U efuse:w:0xf4:m
EFUSE = -U efuse:w:0xf4:m
# low byte: clock settings
# low byte: clock settings
ifeq (${FREQ},8)
ifeq (${FREQ},8)
# internal RC oscillator (8MHz) and /1 clock divider
# internal RC oscillator (8MHz) and /1 clock divider
LFUSE_RC = -U lfuse:w:0xe2:m
LFUSE_RC = -U lfuse:w:0xe2:m
# full swing crystal not supported, use low power crystal
# full swing crystal not supported, use low power crystal
LFUSE_CRYSTAL = -U lfuse:w:0xff:m
LFUSE_CRYSTAL = -U lfuse:w:0xff:m
# external 8MHz low power crystal and /1 clock divider
# external 8MHz low power crystal and /1 clock divider
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
endif
endif
ifeq (${FREQ},16)
ifeq (${FREQ},16)
# internal RC oscillator (8MHz) not possible
# internal RC oscillator (8MHz) not possible
LFUSE_RC =
LFUSE_RC =
# full swing crystal not supported, use low power crystal
# full swing crystal not supported, use low power crystal
LFUSE_CRYSTAL = -U lfuse:w:0xff:m
LFUSE_CRYSTAL = -U lfuse:w:0xff:m
# external 16MHz low power crystal and /1 clock divider
# external 16MHz low power crystal and /1 clock divider
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
LFUSE_LOWPOWER = -U lfuse:w:0xff:m
endif
endif
endif
endif


# select low fuse byte
# select low fuse byte
ifeq (${OSCILLATOR},RC)
ifeq (${OSCILLATOR},RC)
LFUSE = ${LFUSE_RC}
LFUSE = ${LFUSE_RC}
endif
endif
ifeq (${OSCILLATOR},Crystal)
ifeq (${OSCILLATOR},Crystal)
LFUSE = ${LFUSE_CRYSTAL}
LFUSE = ${LFUSE_CRYSTAL}
endif
endif
ifeq (${OSCILLATOR},LowPower)
ifeq (${OSCILLATOR},LowPower)
LFUSE = ${LFUSE_LOWPOWER}
LFUSE = ${LFUSE_LOWPOWER}
endif
endif


# check fuses
# check fuses
FUSES =
FUSES =
ifneq ($(strip ${LFUSE}),)
ifneq ($(strip ${LFUSE}),)
ifneq ($(strip ${HFUSE}),)
ifneq ($(strip ${HFUSE}),)
FUSES = ${LFUSE} ${HFUSE} ${EFUSE}
FUSES = ${LFUSE} ${HFUSE} ${EFUSE}
endif
endif
endif
endif


# set fuses
# set fuses
fuses:
fuses:
ifeq ($(strip ${FUSES}),)
ifeq ($(strip ${FUSES}),)
@echo Invalid fuse settings!
@echo Invalid fuse settings!
else
else
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} ${FUSES}
avrdude -c ${PROGRAMMER} -P ${PORT} -p ${PARTNO} ${OPTIONS} ${FUSES}
endif
endif


Saved diffs