Comparar texto

Encuentra la diferencia entre dos archivos de texto

Editor live

Ocultar sin cambios

Sin ajuste de línea

Vista

Nivel de detalle

Resaltado de sintaxis

Diffchecker Desktop La forma más segura de usar Diffchecker. ¡Obtén la app de Diffchecker Desktop: tus diffs nunca salen de tu computadora!Obtener Desktop

S6000 diff

Creado hace 3 añosEl diff nunca expira

77 eliminaciones

Líneas
Total
Eliminado

Caracteres
Total
Eliminado

Para continuar usando esta función, actualice a Diffchecker Pro Ver precios

227 líneas

169 adiciones

Líneas
Total
Añadido

Caracteres
Total
Añadido

Para continuar usando esta función, actualice a Diffchecker Pro Ver precios

319 líneas

[PWRAP] pwrap_init_preloader

[PWRAP] pwrap_init

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5

[PMIC_WRAP]wrap_init pass,the return value=0.

pl pmic init start

pl pmic efuse start

pl pmic efuse BUCK trim

[0x1C8]=0xF802

[0x1C8]=0xFC02

[0x1CA]=0x807B

[0x1CA]=0x807F

[0x20E]=0xE0

[0x20E]=0xF0

[0x260]=0xF0

[0x286]=0xE0

[0x286]=0xF0

pl pmic efuse end

pl pmic en rst [0x126]=0x13

[0xE]=0x1

[0x540]=0xA0

Battery exist

[0xE]=0x1

[0x540]=0xA0

pl vm read [0x290]=0x50

pl vm set [0x290]=0x52

pl vm check [0x290]=0x52

pl pmic init done

[PLFM] Init I2C: OK(0)

[PLFM] Init PWRAP: OK(0)

[PLFM] Init PMIC: OK(0)

[PLFM] chip[CA00]

[BLDR] Build Time: 20130906-141630

==== Dump RGU Reg ========

RGU MODE: 6D

RGU LENGTH: FFE0

RGU STA: 0

RGU INTERVAL: FFF

RGU SWSYSRST: 0

==== Dump RGU Reg End ====

RGU: g_rgu_satus:0

mtk_wdt_mode_config mode value=2D, tmp:22000030

PL P ON

WDT does not trigger reboot

mtk_wdt_mode_config mode value=70, tmp:22000071

kpd register for pmic set!

mt_usb_calibraion: input_reg = 0x0

mt_usb_calibraion: term_vref = 0x0, clkref = 0x0, vrt_vref = 0x0,

[RTC] bbpu = 0x1, con = 0x8427

[RTC] bbpu = 0x1, con = 0x8407

rtc_first_boot_init

[RTC] get_frequency_meter: input=0x0, ouput=5

[RTC] get_frequency_meter: input=0x0, ouput=3967

[RTC] get_frequency_meter: input=0x0, ouput=5

get frequency time out

[RTC] get_frequency_meter: input=0x0, ouput=0

[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800

[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1

[RTC] bbpu = 0x1, con = 0x424

pl pmic powerkey Press

power key is pressed

[PLFM] Power key boot!

[RTC] rtc_bbpu_power_on done

[SD0] Bus Width: 1

[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)

[SD0] Fail in SEND_OP_COND cmd

[SD0] Switch to High-Speed mode!

[SD0] init card failed

[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)

[SD0] Bus Width: 8

[SD0] Size: 14910 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30535680), ro(0)

[SD0] Initialized

[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)

msdc_ett_offline_to_pl: size<2> m_id<0x15>

msdc <0> <HYNIX > <K3U00M>

msdc <1> <xxxxxx> <K3U00M>

msdc failed to find

found:1,i:0

[EMI] DDR2

[EMI] eMMC/NAND ID = 0,0,0,0,0,0,0,0,0

[EMI] eMMC/NAND ID = 15,1,0,4B,33,55,30,30,4D

[EMI] MDL number = 0

[MEM] 1066 MHZ

rank 0 coarse = 15

rank 0 fine = 64

rank 0 fine = 56

10:| 0 0 1 1 1 0

opt_dle value:8

rank 1 coarse = 15

rank 1 fine = 56

10:| 0 0 1 1 1 0

opt_dle value:8

byte:0, (DQS,DQ)=(8,8)

byte:0, (DQS,DQ)=(8,9)

byte:1, (DQS,DQ)=(8,B)

byte:2, (DQS,DQ)=(8,8)

byte:3, (DQS,DQ)=(8,A)

[EMI] DRAMC calibration passed

[EMI] DQSINCTL:50000

[MEM] complex R/W mem test pass

mt8193_init() enter

mt8193_i2c_init() enter

[I2C][PL] [i2c2 set speed] Set sclk to 99 khz (orig: 100 khz)

mt8193_i2c_init() exit

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x2

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x82

[I2C][PL] [i2c_read] read byte = 0x1

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1254]=0x182

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x121C]=0x0

set_CKGEN_NFI_PIN_GPIO

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x49

[I2C][PL] [i2c_read] read byte = 0x92

[I2C][PL] [i2c_read] read byte = 0x4

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1204]=0x49249

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] read byte = 0x8

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x121C]=0x8000000

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x9B

[I2C][PL] [i2c_read] read byte = 0x24

[I2C][PL] [i2c_read] read byte = 0x1

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1220]=0x1249B

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x7F

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1258]=0x7F

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0xFF

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1260]=0xFF

set_CKGEN_NFI_PIN_GPIO

mt8193_init() exit

[SD0] Bus Width: 1

[PLFM] Init Boot Device: OK(0)

[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)

============func=load_pt_from_fixed_addr===scan pmt from 700000=====

[SD0] Fail in SEND_OP_COND cmd

find pt at 700000

[SD0] init card failed

next pt 0

[PLFM] Init Boot Device: FAIL(1)

64bit parse PMT

find pt

[PART] blksz: -352321538B

part PRELOADER size 0000000000000000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRELOADER" (0 blocks)

part MBR size 0000000000600000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MBR" (0 blocks)

part EBR1 size 0000000000680000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR1" (0 blocks)

part __NODL_PMT size 0000000000700000 0000000000400000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PMT" (0 blocks)

part __NODL_PRO_INFO size 0000000000B00000 0000000000300000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRO_INFO" (0 blocks)

part __NODL_NVRAM size 0000000000E00000 0000000000500000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "NVRAM" (0 blocks)

part __NODL_PROTECT_F size 0000000001300000 0000000000A00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_F" (0 blocks)

part __NODL_PROTECT_S size 0000000001D00000 0000000000A00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_S" (0 blocks)

part __NODL_SECCFG size 0000000002700000 0000000000020000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECURE" (0 blocks)

part UBOOT size 0000000002720000 0000000000060000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "UBOOT" (0 blocks)

part BOOTIMG size 0000000002780000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "BOOTIMG" (0 blocks)

part RECOVERY size 0000000002D80000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "RECOVERY" (0 blocks)

part SEC_RO size 0000000003380000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECSTATIC" (0 blocks)

part __NODL_MISC size 0000000003980000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MISC" (0 blocks)

part LOGO size 0000000003A00000 0000000000300000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "LOGO" (0 blocks)

part EBR2 size 0000000003D00000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR2" (0 blocks)

part __NODL_EXPDB size 0000000003D80000 0000000000A00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EXPDB" (0 blocks)

part FAC size 0000000004780000 000000000C800000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "FAC" (0 blocks)

part ANDROID size 0000000010F80000 0000000040000000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "ANDSYSIMG" (0 blocks)

part CACHE size 0000000050F80000 0000000007E00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "CACHE" (0 blocks)

part USRDATA size 0000000058D80000 0000000349FA0000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "USER" (0 blocks)

[PART] blksz: 512B

[PART] [0x0000000000000000-0x00000000005FFFFF] "PRELOADER" (12288 blocks)

[PART] [0x0000000000600000-0x000000000067FFFF] "MBR" (1024 blocks)

[PART] [0x0000000000680000-0x00000000006FFFFF] "EBR1" (1024 blocks)

[PART] [0x0000000000700000-0x0000000000AFFFFF] "PMT" (8192 blocks)

[PART] [0x0000000000B00000-0x0000000000DFFFFF] "PRO_INFO" (6144 blocks)

[PART] [0x0000000000E00000-0x00000000012FFFFF] "NVRAM" (10240 blocks)

[PART] [0x0000000001300000-0x0000000001CFFFFF] "PROTECT_F" (20480 blocks)

[PART] [0x0000000001D00000-0x00000000026FFFFF] "PROTECT_S" (20480 blocks)

[PART] [0x0000000002700000-0x000000000271FFFF] "SECURE" (256 blocks)

[PART] [0x0000000002720000-0x000000000277FFFF] "UBOOT" (768 blocks)

[PART] [0x0000000002780000-0x0000000002D7FFFF] "BOOTIMG" (12288 blocks)

[PART] [0x0000000002D80000-0x000000000337FFFF] "RECOVERY" (12288 blocks)

[PART] [0x0000000003380000-0x000000000397FFFF] "SECSTATIC" (12288 blocks)

[PART] [0x0000000003980000-0x00000000039FFFFF] "MISC" (1024 blocks)

[PART] [0x0000000003A00000-0x0000000003CFFFFF] "LOGO" (6144 blocks)

[PART] [0x0000000003D00000-0x0000000003D7FFFF] "EBR2" (1024 blocks)

[PART] [0x0000000003D80000-0x000000000477FFFF] "EXPDB" (20480 blocks)

[PART] [0x0000000004780000-0x0000000010F7FFFF] "FAC" (409600 blocks)

[PART] [0x0000000010F80000-0x0000000050F7FFFF] "ANDSYSIMG" (2097152 blocks)

[PART] [0x0000000050F80000-0x0000000058D7FFFF] "CACHE" (258048 blocks)

[PART] [0x0000000058D80000-0x0000000018D7FFFF] "USER" (-2097152 blocks)

[ROM_INFO] 'v2','0x2700000','0x20000','0x3380000','0x2C00'

[SEC_K] SML KEY AC = 0

[SEC_K] SBC_PUBK Found

[SEC] AES Legacy : 0

[SEC] SECCFG AC : 1

[SEC] read '0x2700000'

[SEC] can't find boot device(1)

0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,

<ASSERT> sec.c:line 128 0

[PLFM] preloader fatal error...

[LIB] SecLib.a '20121226-155014'

[PLFM] emergency download mode(timeout: 300s).

[LIB] CFG read size '0x4000' '0x1860'

mtk_arch_reset at pre-loader!

[LIB] Name =

[LIB] Config = 0x22, 0x22

0x31,0x41,0x35,0x35

[platform_vusb_on] PASS

[TOOL] <UART> wait sync time 150ms->103ms

[TOOL] <UART> receieved data: ()

[PART] Image with part header

[PART] name : LK

[PART] addr : FFFFFFFFh

[PART] size : 255900

[PART] magic: 58881688h

[PART] load "UBOOT" from 0x0000000002720200 (dev) to 0x81E00000 (mem) [SUCCESS]

[PART] load speed: 16660KB/s, 255900 bytes, 15ms

[SECRO] Don't read

[AUTHEN] rsa.N length = 1024 bytes

[AUTHEN] rsa.E length = 20 bytes

[LIB] NS-CHIP

[LIB] Don't check

Device APC domain init setup:

0:dram_rank_size:20000000

1:dram_rank_size:20000000

[PLFM] boot reason: 0

[PLFM] boot mode: 0

[PLFM] META COM0: 0

[PLFM] <0x800A0008>: 0x0

[PLFM] boot time: 2490ms

[BLDR] jump to 0x81E00000

[BLDR] <0x81E00000>=0xEA000007

[BLDR] <0x81E00004>=0xEA00713C

[PROFILE] ------- i2c init takes 0 ms --------

mtk_wdt_mode LK config mode value=71

mtk_wdt_mode_config LK mode value=30, tmp:22000030

UB wdt init

mtk_wdt_mode LK config mode value=30

mtk_wdt_mode_config LK mode value=79, tmp:22000079

[LEDS]LK: leds_init: mt65xx_backlight_off

[LEDS]LK: mt65xx_backlight_off

[LEDS]LK: lcd-backlight level is 0

[LEDS]LK: backlight_set_pwm:duty is 0

[PROFILE] ------- led init takes 3 ms --------

[LEDS]LK: isink_init: turn on PMIC6320 isink

DISP/disp common log enabled

DISP/lcd log enabled

DISP_Init, 593

[DSS]disp_path_ddp_clock_on

DISP/DISP_Init, 597

DISP/DISP_Init, 602

DISP/DISP_Init, 608

DISP/DISP_Init, 631

DISI_MODULE_DPI0

RDMA: w=1280, h=800, pitch=3840, mode=0

[DDP] disp_bls_config : gBLSMutexID = 3

DISP/DPI_Set_DrivingCurrent not implement for 6575[LK/LCM] lcm_init()

[DISP] - uboot - DSI_PowerOn. 0x 0,0x 0,0x 0

[DISP] - uboot - DSI_PowerOff. 0x 0,0x 0,0x 0

DISP/DISP_Init, 636

Diferencias guardadas

Texto original

Abrir archivo

[BLDR] Build Time: 20130906-141630
==== Dump RGU Reg ========
RGU MODE:     6D
RGU LENGTH:   FFE0
RGU STA:      0
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
 mtk_wdt_mode_config  mode value=2D, tmp:22000030
PL P ON
WDT does not trigger reboot
 mtk_wdt_mode_config  mode value=70, tmp:22000071
kpd register for pmic set!
mt_usb_calibraion: input_reg = 0x0
mt_usb_calibraion: term_vref = 0x0,  clkref = 0x0, vrt_vref = 0x0,
[RTC] bbpu = 0x1, con = 0x8427
rtc_first_boot_init
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x1, con = 0x424
pl pmic powerkey Press
power key is pressed
[PLFM] Power key boot!
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Fail in SEND_OP_COND cmd
[SD0] init card failed
found:1,i:0
[EMI] DDR2
[EMI] eMMC/NAND ID = 0,0,0,0,0,0,0,0,0
[EMI] MDL number = 0
[MEM] 1066 MHZ
rank 0 coarse = 15
rank 0 fine = 64
10:|    0    0    1    1    1    0
opt_dle value:8
rank 1 coarse = 15
rank 1 fine = 56
10:|    0    0    1    1    1    0
opt_dle value:8
byte:0, (DQS,DQ)=(8,8)
byte:1, (DQS,DQ)=(8,B)
byte:2, (DQS,DQ)=(8,8)
byte:3, (DQS,DQ)=(8,A)
[EMI] DRAMC calibration passed

[EMI] DQSINCTL:50000

[MEM] complex R/W mem test pass
mt8193_init() enter
mt8193_i2c_init() enter
[I2C][PL] [i2c2 set speed] Set sclk to 99 khz (orig: 100 khz)
mt8193_i2c_init() exit
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x2
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x82
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1254]=0x182
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x0
set_CKGEN_NFI_PIN_GPIO
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x49
[I2C][PL] [i2c_read] read byte = 0x92
[I2C][PL] [i2c_read] read byte = 0x4
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1204]=0x49249
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x8
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x8000000
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x9B
[I2C][PL] [i2c_read] read byte = 0x24
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1220]=0x1249B
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x7F
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1258]=0x7F
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0xFF
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1260]=0xFF
set_CKGEN_NFI_PIN_GPIO
mt8193_init() exit
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Fail in SEND_OP_COND cmd
[SD0] init card failed
[PLFM] Init Boot Device: FAIL(1)

[PART] blksz: -352321538B
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRELOADER" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MBR" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR1" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PMT" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRO_INFO" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "NVRAM" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_F" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_S" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECURE" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "UBOOT" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "BOOTIMG" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "RECOVERY" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECSTATIC" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MISC" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "LOGO" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR2" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EXPDB" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "FAC" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "ANDSYSIMG" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "CACHE" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "USER" (0 blocks)
[ROM_INFO] 'v2','0x2700000','0x20000','0x3380000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Found
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1

[SEC] read '0x2700000'
[SEC] can't find boot device(1)
<ASSERT> sec.c:line 128 0
[PLFM] preloader fatal error...
[PLFM] emergency download mode(timeout: 300s).
mtk_arch_reset at pre-loader!

Texto modificado

Abrir archivo

[PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
[PMIC_WRAP]wrap_init pass,the return value=0.
pl pmic init start
pl pmic efuse start
pl pmic efuse BUCK trim
[0x1C8]=0xFC02
[0x1CA]=0x807F
[0x20E]=0xF0
[0x260]=0xF0
[0x286]=0xF0
pl pmic efuse end
pl pmic en rst [0x126]=0x13
[0xE]=0x1
[0x540]=0xA0
Battery exist
[0xE]=0x1
[0x540]=0xA0
pl vm read [0x290]=0x50
pl vm set [0x290]=0x52
pl vm check [0x290]=0x52
pl pmic init done
[PLFM] Init I2C: OK(0)
[PLFM] Init PWRAP: OK(0)
[PLFM] Init PMIC: OK(0)
[PLFM] chip[CA00]
 
[BLDR] Build Time: 20130906-141630
==== Dump RGU Reg ========
RGU MODE:     6D
RGU LENGTH:   FFE0
RGU STA:      0
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
 mtk_wdt_mode_config  mode value=2D, tmp:22000030
PL P ON
WDT does not trigger reboot
 mtk_wdt_mode_config  mode value=70, tmp:22000071
kpd register for pmic set!
mt_usb_calibraion: input_reg = 0x0
mt_usb_calibraion: term_vref = 0x0,  clkref = 0x0, vrt_vref = 0x0,
[RTC] bbpu = 0x1, con = 0x8407
rtc_first_boot_init
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
get frequency time out
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x1, con = 0x424
pl pmic powerkey Press
power key is pressed
[PLFM] Power key boot!
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Switch to High-Speed mode!
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 14910 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30535680), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)
msdc_ett_offline_to_pl: size<2> m_id<0x15>
msdc <0> <HYNIX > <K3U00M>
msdc <1> <xxxxxx> <K3U00M>
msdc failed to find
found:1,i:0
[EMI] DDR2
[EMI] eMMC/NAND ID = 15,1,0,4B,33,55,30,30,4D
[EMI] MDL number = 0
[MEM] 1066 MHZ
rank 0 coarse = 15
rank 0 fine = 56
10:|    0    0    1    1    1    0
opt_dle value:8
rank 1 coarse = 15
rank 1 fine = 56
10:|    0    0    1    1    1    0
opt_dle value:8
byte:0, (DQS,DQ)=(8,9)
byte:1, (DQS,DQ)=(8,B)
byte:2, (DQS,DQ)=(8,8)
byte:3, (DQS,DQ)=(8,A)
[EMI] DRAMC calibration passed
 
[EMI] DQSINCTL:50000
 
[MEM] complex R/W mem test pass
mt8193_init() enter
mt8193_i2c_init() enter
[I2C][PL] [i2c2 set speed] Set sclk to 99 khz (orig: 100 khz)
mt8193_i2c_init() exit
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x2
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x82
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1254]=0x182
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x0
set_CKGEN_NFI_PIN_GPIO
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x49
[I2C][PL] [i2c_read] read byte = 0x92
[I2C][PL] [i2c_read] read byte = 0x4
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1204]=0x49249
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x8
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x8000000
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x9B
[I2C][PL] [i2c_read] read byte = 0x24
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1220]=0x1249B
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x7F
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1258]=0x7F
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0xFF
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1260]=0xFF
set_CKGEN_NFI_PIN_GPIO
mt8193_init() exit
[PLFM] Init Boot Device: OK(0)
============func=load_pt_from_fixed_addr===scan pmt from 700000=====
find pt at 700000
next pt 0
64bit parse PMT
find pt
part PRELOADER size 0000000000000000 0000000000600000
part MBR size 0000000000600000 0000000000080000
part EBR1 size 0000000000680000 0000000000080000
part __NODL_PMT size 0000000000700000 0000000000400000
part __NODL_PRO_INFO size 0000000000B00000 0000000000300000
part __NODL_NVRAM size 0000000000E00000 0000000000500000
part __NODL_PROTECT_F size 0000000001300000 0000000000A00000
part __NODL_PROTECT_S size 0000000001D00000 0000000000A00000
part __NODL_SECCFG size 0000000002700000 0000000000020000
part UBOOT size 0000000002720000 0000000000060000
part BOOTIMG size 0000000002780000 0000000000600000
part RECOVERY size 0000000002D80000 0000000000600000
part SEC_RO size 0000000003380000 0000000000600000
part __NODL_MISC size 0000000003980000 0000000000080000
part LOGO size 0000000003A00000 0000000000300000
part EBR2 size 0000000003D00000 0000000000080000
part __NODL_EXPDB size 0000000003D80000 0000000000A00000
part FAC size 0000000004780000 000000000C800000
part ANDROID size 0000000010F80000 0000000040000000
part CACHE size 0000000050F80000 0000000007E00000
part USRDATA size 0000000058D80000 0000000349FA0000
 
[PART] blksz: 512B
[PART] [0x0000000000000000-0x00000000005FFFFF] "PRELOADER" (12288 blocks)
[PART] [0x0000000000600000-0x000000000067FFFF] "MBR" (1024 blocks)
[PART] [0x0000000000680000-0x00000000006FFFFF] "EBR1" (1024 blocks)
[PART] [0x0000000000700000-0x0000000000AFFFFF] "PMT" (8192 blocks)
[PART] [0x0000000000B00000-0x0000000000DFFFFF] "PRO_INFO" (6144 blocks)
[PART] [0x0000000000E00000-0x00000000012FFFFF] "NVRAM" (10240 blocks)
[PART] [0x0000000001300000-0x0000000001CFFFFF] "PROTECT_F" (20480 blocks)
[PART] [0x0000000001D00000-0x00000000026FFFFF] "PROTECT_S" (20480 blocks)
[PART] [0x0000000002700000-0x000000000271FFFF] "SECURE" (256 blocks)
[PART] [0x0000000002720000-0x000000000277FFFF] "UBOOT" (768 blocks)
[PART] [0x0000000002780000-0x0000000002D7FFFF] "BOOTIMG" (12288 blocks)
[PART] [0x0000000002D80000-0x000000000337FFFF] "RECOVERY" (12288 blocks)
[PART] [0x0000000003380000-0x000000000397FFFF] "SECSTATIC" (12288 blocks)
[PART] [0x0000000003980000-0x00000000039FFFFF] "MISC" (1024 blocks)
[PART] [0x0000000003A00000-0x0000000003CFFFFF] "LOGO" (6144 blocks)
[PART] [0x0000000003D00000-0x0000000003D7FFFF] "EBR2" (1024 blocks)
[PART] [0x0000000003D80000-0x000000000477FFFF] "EXPDB" (20480 blocks)
[PART] [0x0000000004780000-0x0000000010F7FFFF] "FAC" (409600 blocks)
[PART] [0x0000000010F80000-0x0000000050F7FFFF] "ANDSYSIMG" (2097152 blocks)
[PART] [0x0000000050F80000-0x0000000058D7FFFF] "CACHE" (258048 blocks)
[PART] [0x0000000058D80000-0x0000000018D7FFFF] "USER" (-2097152 blocks)
[ROM_INFO] 'v2','0x2700000','0x20000','0x3380000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Found
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1
 
 
[SEC] read '0x2700000'
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
 
[LIB] SecLib.a '20121226-155014'
[LIB] CFG read size '0x4000' '0x1860'
[LIB] Name =
[LIB] Config = 0x22, 0x22
0x31,0x41,0x35,0x35
[platform_vusb_on] PASS
 
[TOOL] <UART> wait sync time 150ms->103ms
[TOOL] <UART> receieved data: ()
[PART] Image with part header
[PART] name : LK
[PART] addr : FFFFFFFFh
[PART] size : 255900
[PART] magic: 58881688h
 
[PART] load "UBOOT" from 0x0000000002720200 (dev) to 0x81E00000 (mem) [SUCCESS]
[PART] load speed: 16660KB/s, 255900 bytes, 15ms
[SECRO] Don't read
[AUTHEN] rsa.N length = 1024 bytes
[AUTHEN] rsa.E length = 20 bytes
[LIB] NS-CHIP
[LIB] Don't check
 
Device APC domain init setup:
 
0:dram_rank_size:20000000
1:dram_rank_size:20000000
 
[PLFM] boot reason: 0
[PLFM] boot mode: 0
[PLFM] META COM0: 0
[PLFM] <0x800A0008>: 0x0
[PLFM] boot time: 2490ms
 
[BLDR] jump to 0x81E00000
[BLDR] <0x81E00000>=0xEA000007
[BLDR] <0x81E00004>=0xEA00713C
[PROFILE] ------- i2c init takes 0 ms --------
 mtk_wdt_mode LK config  mode value=71
 mtk_wdt_mode_config LK  mode value=30, tmp:22000030
UB wdt init
 mtk_wdt_mode LK config  mode value=30
 mtk_wdt_mode_config LK  mode value=79, tmp:22000079
[LEDS]LK: leds_init: mt65xx_backlight_off
[LEDS]LK: mt65xx_backlight_off
[LEDS]LK: lcd-backlight level is 0
[LEDS]LK: backlight_set_pwm:duty is 0
[PROFILE] ------- led init takes 3 ms --------
[LEDS]LK: isink_init: turn on PMIC6320 isink
DISP/disp common log enabled
DISP/lcd log enabled
DISP_Init, 593
[DSS]disp_path_ddp_clock_on
DISP/DISP_Init, 597
DISP/DISP_Init, 602
DISP/DISP_Init, 608
DISP/DISP_Init, 631
DISI_MODULE_DPI0
RDMA: w=1280, h=800, pitch=3840, mode=0
[DDP] disp_bls_config : gBLSMutexID = 3
DISP/DPI_Set_DrivingCurrent not implement for 6575[LK/LCM] lcm_init()
[DISP] - uboot - DSI_PowerOn. 0x       0,0x       0,0x       0
[DISP] - uboot - DSI_PowerOff. 0x       0,0x       0,0x       0
DISP/DISP_Init, 636