Comparer le texte

Trouver la différence entre deux fichiers texte

Éditeur live

Cacher identiques

Sans retour à la ligne

Vue

Niveau de précision

Coloration syntaxique

Diffchecker Desktop La façon la plus sécurisée d'utiliser Diffchecker. Obtenez l'application Diffchecker Desktop : vos diffs ne quittent jamais votre ordinateur !Obtenir Desktop

S6000 diff

Créé il y a 3 ansLe diff n'expire jamais

77 suppressions

Lignes
Total
Supprimé

Caractères
Total
Supprimé

Pour continuer à utiliser cette fonctionnalité, passez à Diffchecker Pro Voir les prix

227 lignes

169 ajouts

Lignes
Total
Ajouté

Caractères
Total
Ajouté

Pour continuer à utiliser cette fonctionnalité, passez à Diffchecker Pro Voir les prix

319 lignes

[PWRAP] pwrap_init_preloader

[PWRAP] pwrap_init

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5

[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5

[PMIC_WRAP]wrap_init pass,the return value=0.

pl pmic init start

pl pmic efuse start

pl pmic efuse BUCK trim

[0x1C8]=0xF802

[0x1C8]=0xFC02

[0x1CA]=0x807B

[0x1CA]=0x807F

[0x20E]=0xE0

[0x20E]=0xF0

[0x260]=0xF0

[0x286]=0xE0

[0x286]=0xF0

pl pmic efuse end

pl pmic en rst [0x126]=0x13

[0xE]=0x1

[0x540]=0xA0

Battery exist

[0xE]=0x1

[0x540]=0xA0

pl vm read [0x290]=0x50

pl vm set [0x290]=0x52

pl vm check [0x290]=0x52

pl pmic init done

[PLFM] Init I2C: OK(0)

[PLFM] Init PWRAP: OK(0)

[PLFM] Init PMIC: OK(0)

[PLFM] chip[CA00]

[BLDR] Build Time: 20130906-141630

==== Dump RGU Reg ========

RGU MODE: 6D

RGU LENGTH: FFE0

RGU STA: 0

RGU INTERVAL: FFF

RGU SWSYSRST: 0

==== Dump RGU Reg End ====

RGU: g_rgu_satus:0

mtk_wdt_mode_config mode value=2D, tmp:22000030

PL P ON

WDT does not trigger reboot

mtk_wdt_mode_config mode value=70, tmp:22000071

kpd register for pmic set!

mt_usb_calibraion: input_reg = 0x0

mt_usb_calibraion: term_vref = 0x0, clkref = 0x0, vrt_vref = 0x0,

[RTC] bbpu = 0x1, con = 0x8427

[RTC] bbpu = 0x1, con = 0x8407

rtc_first_boot_init

[RTC] get_frequency_meter: input=0x0, ouput=5

[RTC] get_frequency_meter: input=0x0, ouput=3967

[RTC] get_frequency_meter: input=0x0, ouput=5

get frequency time out

[RTC] get_frequency_meter: input=0x0, ouput=0

[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800

[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1

[RTC] bbpu = 0x1, con = 0x424

pl pmic powerkey Press

power key is pressed

[PLFM] Power key boot!

[RTC] rtc_bbpu_power_on done

[SD0] Bus Width: 1

[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)

[SD0] Fail in SEND_OP_COND cmd

[SD0] Switch to High-Speed mode!

[SD0] init card failed

[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)

[SD0] Bus Width: 8

[SD0] Size: 14910 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30535680), ro(0)

[SD0] Initialized

[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)

msdc_ett_offline_to_pl: size<2> m_id<0x15>

msdc <0> <HYNIX > <K3U00M>

msdc <1> <xxxxxx> <K3U00M>

msdc failed to find

found:1,i:0

[EMI] DDR2

[EMI] eMMC/NAND ID = 0,0,0,0,0,0,0,0,0

[EMI] eMMC/NAND ID = 15,1,0,4B,33,55,30,30,4D

[EMI] MDL number = 0

[MEM] 1066 MHZ

rank 0 coarse = 15

rank 0 fine = 64

rank 0 fine = 56

10:| 0 0 1 1 1 0

opt_dle value:8

rank 1 coarse = 15

rank 1 fine = 56

10:| 0 0 1 1 1 0

opt_dle value:8

byte:0, (DQS,DQ)=(8,8)

byte:0, (DQS,DQ)=(8,9)

byte:1, (DQS,DQ)=(8,B)

byte:2, (DQS,DQ)=(8,8)

byte:3, (DQS,DQ)=(8,A)

[EMI] DRAMC calibration passed

[EMI] DQSINCTL:50000

[MEM] complex R/W mem test pass

mt8193_init() enter

mt8193_i2c_init() enter

[I2C][PL] [i2c2 set speed] Set sclk to 99 khz (orig: 100 khz)

mt8193_i2c_init() exit

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x2

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x82

[I2C][PL] [i2c_read] read byte = 0x1

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1254]=0x182

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x121C]=0x0

set_CKGEN_NFI_PIN_GPIO

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x49

[I2C][PL] [i2c_read] read byte = 0x92

[I2C][PL] [i2c_read] read byte = 0x4

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1204]=0x49249

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] read byte = 0x8

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x121C]=0x8000000

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x9B

[I2C][PL] [i2c_read] read byte = 0x24

[I2C][PL] [i2c_read] read byte = 0x1

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1220]=0x1249B

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x7F

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1258]=0x7F

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[I2C][PL] [i2c2 write] i2c transaction complate

[I2C][PL] [i2c_read] read byte = 0xFF

[I2C][PL] [i2c_read] read byte = 0x0

[I2C][PL] [i2c_read] Done

[mt8193_i2c_write] Reg[0x1260]=0xFF

set_CKGEN_NFI_PIN_GPIO

mt8193_init() exit

[SD0] Bus Width: 1

[PLFM] Init Boot Device: OK(0)

[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)

============func=load_pt_from_fixed_addr===scan pmt from 700000=====

[SD0] Fail in SEND_OP_COND cmd

find pt at 700000

[SD0] init card failed

next pt 0

[PLFM] Init Boot Device: FAIL(1)

64bit parse PMT

find pt

[PART] blksz: -352321538B

part PRELOADER size 0000000000000000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRELOADER" (0 blocks)

part MBR size 0000000000600000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MBR" (0 blocks)

part EBR1 size 0000000000680000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR1" (0 blocks)

part __NODL_PMT size 0000000000700000 0000000000400000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PMT" (0 blocks)

part __NODL_PRO_INFO size 0000000000B00000 0000000000300000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRO_INFO" (0 blocks)

part __NODL_NVRAM size 0000000000E00000 0000000000500000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "NVRAM" (0 blocks)

part __NODL_PROTECT_F size 0000000001300000 0000000000A00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_F" (0 blocks)

part __NODL_PROTECT_S size 0000000001D00000 0000000000A00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_S" (0 blocks)

part __NODL_SECCFG size 0000000002700000 0000000000020000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECURE" (0 blocks)

part UBOOT size 0000000002720000 0000000000060000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "UBOOT" (0 blocks)

part BOOTIMG size 0000000002780000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "BOOTIMG" (0 blocks)

part RECOVERY size 0000000002D80000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "RECOVERY" (0 blocks)

part SEC_RO size 0000000003380000 0000000000600000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECSTATIC" (0 blocks)

part __NODL_MISC size 0000000003980000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MISC" (0 blocks)

part LOGO size 0000000003A00000 0000000000300000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "LOGO" (0 blocks)

part EBR2 size 0000000003D00000 0000000000080000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR2" (0 blocks)

part __NODL_EXPDB size 0000000003D80000 0000000000A00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EXPDB" (0 blocks)

part FAC size 0000000004780000 000000000C800000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "FAC" (0 blocks)

part ANDROID size 0000000010F80000 0000000040000000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "ANDSYSIMG" (0 blocks)

part CACHE size 0000000050F80000 0000000007E00000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "CACHE" (0 blocks)

part USRDATA size 0000000058D80000 0000000349FA0000

[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "USER" (0 blocks)

[PART] blksz: 512B

[PART] [0x0000000000000000-0x00000000005FFFFF] "PRELOADER" (12288 blocks)

[PART] [0x0000000000600000-0x000000000067FFFF] "MBR" (1024 blocks)

[PART] [0x0000000000680000-0x00000000006FFFFF] "EBR1" (1024 blocks)

[PART] [0x0000000000700000-0x0000000000AFFFFF] "PMT" (8192 blocks)

[PART] [0x0000000000B00000-0x0000000000DFFFFF] "PRO_INFO" (6144 blocks)

[PART] [0x0000000000E00000-0x00000000012FFFFF] "NVRAM" (10240 blocks)

[PART] [0x0000000001300000-0x0000000001CFFFFF] "PROTECT_F" (20480 blocks)

[PART] [0x0000000001D00000-0x00000000026FFFFF] "PROTECT_S" (20480 blocks)

[PART] [0x0000000002700000-0x000000000271FFFF] "SECURE" (256 blocks)

[PART] [0x0000000002720000-0x000000000277FFFF] "UBOOT" (768 blocks)

[PART] [0x0000000002780000-0x0000000002D7FFFF] "BOOTIMG" (12288 blocks)

[PART] [0x0000000002D80000-0x000000000337FFFF] "RECOVERY" (12288 blocks)

[PART] [0x0000000003380000-0x000000000397FFFF] "SECSTATIC" (12288 blocks)

[PART] [0x0000000003980000-0x00000000039FFFFF] "MISC" (1024 blocks)

[PART] [0x0000000003A00000-0x0000000003CFFFFF] "LOGO" (6144 blocks)

[PART] [0x0000000003D00000-0x0000000003D7FFFF] "EBR2" (1024 blocks)

[PART] [0x0000000003D80000-0x000000000477FFFF] "EXPDB" (20480 blocks)

[PART] [0x0000000004780000-0x0000000010F7FFFF] "FAC" (409600 blocks)

[PART] [0x0000000010F80000-0x0000000050F7FFFF] "ANDSYSIMG" (2097152 blocks)

[PART] [0x0000000050F80000-0x0000000058D7FFFF] "CACHE" (258048 blocks)

[PART] [0x0000000058D80000-0x0000000018D7FFFF] "USER" (-2097152 blocks)

[ROM_INFO] 'v2','0x2700000','0x20000','0x3380000','0x2C00'

[SEC_K] SML KEY AC = 0

[SEC_K] SBC_PUBK Found

[SEC] AES Legacy : 0

[SEC] SECCFG AC : 1

[SEC] read '0x2700000'

[SEC] can't find boot device(1)

0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,

<ASSERT> sec.c:line 128 0

[PLFM] preloader fatal error...

[LIB] SecLib.a '20121226-155014'

[PLFM] emergency download mode(timeout: 300s).

[LIB] CFG read size '0x4000' '0x1860'

mtk_arch_reset at pre-loader!

[LIB] Name =

[LIB] Config = 0x22, 0x22

0x31,0x41,0x35,0x35

[platform_vusb_on] PASS

[TOOL] <UART> wait sync time 150ms->103ms

[TOOL] <UART> receieved data: ()

[PART] Image with part header

[PART] name : LK

[PART] addr : FFFFFFFFh

[PART] size : 255900

[PART] magic: 58881688h

[PART] load "UBOOT" from 0x0000000002720200 (dev) to 0x81E00000 (mem) [SUCCESS]

[PART] load speed: 16660KB/s, 255900 bytes, 15ms

[SECRO] Don't read

[AUTHEN] rsa.N length = 1024 bytes

[AUTHEN] rsa.E length = 20 bytes

[LIB] NS-CHIP

[LIB] Don't check

Device APC domain init setup:

0:dram_rank_size:20000000

1:dram_rank_size:20000000

[PLFM] boot reason: 0

[PLFM] boot mode: 0

[PLFM] META COM0: 0

[PLFM] <0x800A0008>: 0x0

[PLFM] boot time: 2490ms

[BLDR] jump to 0x81E00000

[BLDR] <0x81E00000>=0xEA000007

[BLDR] <0x81E00004>=0xEA00713C

[PROFILE] ------- i2c init takes 0 ms --------

mtk_wdt_mode LK config mode value=71

mtk_wdt_mode_config LK mode value=30, tmp:22000030

UB wdt init

mtk_wdt_mode LK config mode value=30

mtk_wdt_mode_config LK mode value=79, tmp:22000079

[LEDS]LK: leds_init: mt65xx_backlight_off

[LEDS]LK: mt65xx_backlight_off

[LEDS]LK: lcd-backlight level is 0

[LEDS]LK: backlight_set_pwm:duty is 0

[PROFILE] ------- led init takes 3 ms --------

[LEDS]LK: isink_init: turn on PMIC6320 isink

DISP/disp common log enabled

DISP/lcd log enabled

DISP_Init, 593

[DSS]disp_path_ddp_clock_on

DISP/DISP_Init, 597

DISP/DISP_Init, 602

DISP/DISP_Init, 608

DISP/DISP_Init, 631

DISI_MODULE_DPI0

RDMA: w=1280, h=800, pitch=3840, mode=0

[DDP] disp_bls_config : gBLSMutexID = 3

DISP/DPI_Set_DrivingCurrent not implement for 6575[LK/LCM] lcm_init()

[DISP] - uboot - DSI_PowerOn. 0x 0,0x 0,0x 0

[DISP] - uboot - DSI_PowerOff. 0x 0,0x 0,0x 0

DISP/DISP_Init, 636

Différences enregistrées

Texte d'origine

Ouvrir un fichier

[BLDR] Build Time: 20130906-141630
==== Dump RGU Reg ========
RGU MODE:     6D
RGU LENGTH:   FFE0
RGU STA:      0
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
 mtk_wdt_mode_config  mode value=2D, tmp:22000030
PL P ON
WDT does not trigger reboot
 mtk_wdt_mode_config  mode value=70, tmp:22000071
kpd register for pmic set!
mt_usb_calibraion: input_reg = 0x0
mt_usb_calibraion: term_vref = 0x0,  clkref = 0x0, vrt_vref = 0x0,
[RTC] bbpu = 0x1, con = 0x8427
rtc_first_boot_init
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x1, con = 0x424
pl pmic powerkey Press
power key is pressed
[PLFM] Power key boot!
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Fail in SEND_OP_COND cmd
[SD0] init card failed
found:1,i:0
[EMI] DDR2
[EMI] eMMC/NAND ID = 0,0,0,0,0,0,0,0,0
[EMI] MDL number = 0
[MEM] 1066 MHZ
rank 0 coarse = 15
rank 0 fine = 64
10:|    0    0    1    1    1    0
opt_dle value:8
rank 1 coarse = 15
rank 1 fine = 56
10:|    0    0    1    1    1    0
opt_dle value:8
byte:0, (DQS,DQ)=(8,8)
byte:1, (DQS,DQ)=(8,B)
byte:2, (DQS,DQ)=(8,8)
byte:3, (DQS,DQ)=(8,A)
[EMI] DRAMC calibration passed

[EMI] DQSINCTL:50000

[MEM] complex R/W mem test pass
mt8193_init() enter
mt8193_i2c_init() enter
[I2C][PL] [i2c2 set speed] Set sclk to 99 khz (orig: 100 khz)
mt8193_i2c_init() exit
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x2
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x82
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1254]=0x182
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x0
set_CKGEN_NFI_PIN_GPIO
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x49
[I2C][PL] [i2c_read] read byte = 0x92
[I2C][PL] [i2c_read] read byte = 0x4
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1204]=0x49249
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x8
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x8000000
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x9B
[I2C][PL] [i2c_read] read byte = 0x24
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1220]=0x1249B
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x7F
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1258]=0x7F
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0xFF
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1260]=0xFF
set_CKGEN_NFI_PIN_GPIO
mt8193_init() exit
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Fail in SEND_OP_COND cmd
[SD0] init card failed
[PLFM] Init Boot Device: FAIL(1)

[PART] blksz: -352321538B
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRELOADER" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MBR" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR1" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PMT" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PRO_INFO" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "NVRAM" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_F" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "PROTECT_S" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECURE" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "UBOOT" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "BOOTIMG" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "RECOVERY" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "SECSTATIC" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "MISC" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "LOGO" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EBR2" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "EXPDB" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "FAC" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "ANDSYSIMG" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "CACHE" (0 blocks)
[PART] [0x0000000000000000-0xFFFFFFFFFFFFFFFF] "USER" (0 blocks)
[ROM_INFO] 'v2','0x2700000','0x20000','0x3380000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Found
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1

[SEC] read '0x2700000'
[SEC] can't find boot device(1)
<ASSERT> sec.c:line 128 0
[PLFM] preloader fatal error...
[PLFM] emergency download mode(timeout: 300s).
mtk_arch_reset at pre-loader!

Texte modifié

Ouvrir un fichier

[PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
[PMIC_WRAP]wrap_init pass,the return value=0.
pl pmic init start
pl pmic efuse start
pl pmic efuse BUCK trim
[0x1C8]=0xFC02
[0x1CA]=0x807F
[0x20E]=0xF0
[0x260]=0xF0
[0x286]=0xF0
pl pmic efuse end
pl pmic en rst [0x126]=0x13
[0xE]=0x1
[0x540]=0xA0
Battery exist
[0xE]=0x1
[0x540]=0xA0
pl vm read [0x290]=0x50
pl vm set [0x290]=0x52
pl vm check [0x290]=0x52
pl pmic init done
[PLFM] Init I2C: OK(0)
[PLFM] Init PWRAP: OK(0)
[PLFM] Init PMIC: OK(0)
[PLFM] chip[CA00]
 
[BLDR] Build Time: 20130906-141630
==== Dump RGU Reg ========
RGU MODE:     6D
RGU LENGTH:   FFE0
RGU STA:      0
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
 mtk_wdt_mode_config  mode value=2D, tmp:22000030
PL P ON
WDT does not trigger reboot
 mtk_wdt_mode_config  mode value=70, tmp:22000071
kpd register for pmic set!
mt_usb_calibraion: input_reg = 0x0
mt_usb_calibraion: term_vref = 0x0,  clkref = 0x0, vrt_vref = 0x0,
[RTC] bbpu = 0x1, con = 0x8407
rtc_first_boot_init
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
get frequency time out
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x1, con = 0x424
pl pmic powerkey Press
power key is pressed
[PLFM] Power key boot!
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Switch to High-Speed mode!
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 14910 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30535680), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)
msdc_ett_offline_to_pl: size<2> m_id<0x15>
msdc <0> <HYNIX > <K3U00M>
msdc <1> <xxxxxx> <K3U00M>
msdc failed to find
found:1,i:0
[EMI] DDR2
[EMI] eMMC/NAND ID = 15,1,0,4B,33,55,30,30,4D
[EMI] MDL number = 0
[MEM] 1066 MHZ
rank 0 coarse = 15
rank 0 fine = 56
10:|    0    0    1    1    1    0
opt_dle value:8
rank 1 coarse = 15
rank 1 fine = 56
10:|    0    0    1    1    1    0
opt_dle value:8
byte:0, (DQS,DQ)=(8,9)
byte:1, (DQS,DQ)=(8,B)
byte:2, (DQS,DQ)=(8,8)
byte:3, (DQS,DQ)=(8,A)
[EMI] DRAMC calibration passed
 
[EMI] DQSINCTL:50000
 
[MEM] complex R/W mem test pass
mt8193_init() enter
mt8193_i2c_init() enter
[I2C][PL] [i2c2 set speed] Set sclk to 99 khz (orig: 100 khz)
mt8193_i2c_init() exit
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x2
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x82
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1254]=0x182
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x0
set_CKGEN_NFI_PIN_GPIO
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x49
[I2C][PL] [i2c_read] read byte = 0x92
[I2C][PL] [i2c_read] read byte = 0x4
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1204]=0x49249
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x8
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x121C]=0x8000000
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x9B
[I2C][PL] [i2c_read] read byte = 0x24
[I2C][PL] [i2c_read] read byte = 0x1
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1220]=0x1249B
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x7F
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1258]=0x7F
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c2 write] i2c transaction complate
[I2C][PL] [i2c_read] read byte = 0xFF
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] read byte = 0x0
[I2C][PL] [i2c_read] Done
[mt8193_i2c_write] Reg[0x1260]=0xFF
set_CKGEN_NFI_PIN_GPIO
mt8193_init() exit
[PLFM] Init Boot Device: OK(0)
============func=load_pt_from_fixed_addr===scan pmt from 700000=====
find pt at 700000
next pt 0
64bit parse PMT
find pt
part PRELOADER size 0000000000000000 0000000000600000
part MBR size 0000000000600000 0000000000080000
part EBR1 size 0000000000680000 0000000000080000
part __NODL_PMT size 0000000000700000 0000000000400000
part __NODL_PRO_INFO size 0000000000B00000 0000000000300000
part __NODL_NVRAM size 0000000000E00000 0000000000500000
part __NODL_PROTECT_F size 0000000001300000 0000000000A00000
part __NODL_PROTECT_S size 0000000001D00000 0000000000A00000
part __NODL_SECCFG size 0000000002700000 0000000000020000
part UBOOT size 0000000002720000 0000000000060000
part BOOTIMG size 0000000002780000 0000000000600000
part RECOVERY size 0000000002D80000 0000000000600000
part SEC_RO size 0000000003380000 0000000000600000
part __NODL_MISC size 0000000003980000 0000000000080000
part LOGO size 0000000003A00000 0000000000300000
part EBR2 size 0000000003D00000 0000000000080000
part __NODL_EXPDB size 0000000003D80000 0000000000A00000
part FAC size 0000000004780000 000000000C800000
part ANDROID size 0000000010F80000 0000000040000000
part CACHE size 0000000050F80000 0000000007E00000
part USRDATA size 0000000058D80000 0000000349FA0000
 
[PART] blksz: 512B
[PART] [0x0000000000000000-0x00000000005FFFFF] "PRELOADER" (12288 blocks)
[PART] [0x0000000000600000-0x000000000067FFFF] "MBR" (1024 blocks)
[PART] [0x0000000000680000-0x00000000006FFFFF] "EBR1" (1024 blocks)
[PART] [0x0000000000700000-0x0000000000AFFFFF] "PMT" (8192 blocks)
[PART] [0x0000000000B00000-0x0000000000DFFFFF] "PRO_INFO" (6144 blocks)
[PART] [0x0000000000E00000-0x00000000012FFFFF] "NVRAM" (10240 blocks)
[PART] [0x0000000001300000-0x0000000001CFFFFF] "PROTECT_F" (20480 blocks)
[PART] [0x0000000001D00000-0x00000000026FFFFF] "PROTECT_S" (20480 blocks)
[PART] [0x0000000002700000-0x000000000271FFFF] "SECURE" (256 blocks)
[PART] [0x0000000002720000-0x000000000277FFFF] "UBOOT" (768 blocks)
[PART] [0x0000000002780000-0x0000000002D7FFFF] "BOOTIMG" (12288 blocks)
[PART] [0x0000000002D80000-0x000000000337FFFF] "RECOVERY" (12288 blocks)
[PART] [0x0000000003380000-0x000000000397FFFF] "SECSTATIC" (12288 blocks)
[PART] [0x0000000003980000-0x00000000039FFFFF] "MISC" (1024 blocks)
[PART] [0x0000000003A00000-0x0000000003CFFFFF] "LOGO" (6144 blocks)
[PART] [0x0000000003D00000-0x0000000003D7FFFF] "EBR2" (1024 blocks)
[PART] [0x0000000003D80000-0x000000000477FFFF] "EXPDB" (20480 blocks)
[PART] [0x0000000004780000-0x0000000010F7FFFF] "FAC" (409600 blocks)
[PART] [0x0000000010F80000-0x0000000050F7FFFF] "ANDSYSIMG" (2097152 blocks)
[PART] [0x0000000050F80000-0x0000000058D7FFFF] "CACHE" (258048 blocks)
[PART] [0x0000000058D80000-0x0000000018D7FFFF] "USER" (-2097152 blocks)
[ROM_INFO] 'v2','0x2700000','0x20000','0x3380000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Found
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1
 
 
[SEC] read '0x2700000'
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
 
[LIB] SecLib.a '20121226-155014'
[LIB] CFG read size '0x4000' '0x1860'
[LIB] Name =
[LIB] Config = 0x22, 0x22
0x31,0x41,0x35,0x35
[platform_vusb_on] PASS
 
[TOOL] <UART> wait sync time 150ms->103ms
[TOOL] <UART> receieved data: ()
[PART] Image with part header
[PART] name : LK
[PART] addr : FFFFFFFFh
[PART] size : 255900
[PART] magic: 58881688h
 
[PART] load "UBOOT" from 0x0000000002720200 (dev) to 0x81E00000 (mem) [SUCCESS]
[PART] load speed: 16660KB/s, 255900 bytes, 15ms
[SECRO] Don't read
[AUTHEN] rsa.N length = 1024 bytes
[AUTHEN] rsa.E length = 20 bytes
[LIB] NS-CHIP
[LIB] Don't check
 
Device APC domain init setup:
 
0:dram_rank_size:20000000
1:dram_rank_size:20000000
 
[PLFM] boot reason: 0
[PLFM] boot mode: 0
[PLFM] META COM0: 0
[PLFM] <0x800A0008>: 0x0
[PLFM] boot time: 2490ms
 
[BLDR] jump to 0x81E00000
[BLDR] <0x81E00000>=0xEA000007
[BLDR] <0x81E00004>=0xEA00713C
[PROFILE] ------- i2c init takes 0 ms --------
 mtk_wdt_mode LK config  mode value=71
 mtk_wdt_mode_config LK  mode value=30, tmp:22000030
UB wdt init
 mtk_wdt_mode LK config  mode value=30
 mtk_wdt_mode_config LK  mode value=79, tmp:22000079
[LEDS]LK: leds_init: mt65xx_backlight_off
[LEDS]LK: mt65xx_backlight_off
[LEDS]LK: lcd-backlight level is 0
[LEDS]LK: backlight_set_pwm:duty is 0
[PROFILE] ------- led init takes 3 ms --------
[LEDS]LK: isink_init: turn on PMIC6320 isink
DISP/disp common log enabled
DISP/lcd log enabled
DISP_Init, 593
[DSS]disp_path_ddp_clock_on
DISP/DISP_Init, 597
DISP/DISP_Init, 602
DISP/DISP_Init, 608
DISP/DISP_Init, 631
DISI_MODULE_DPI0
RDMA: w=1280, h=800, pitch=3840, mode=0
[DDP] disp_bls_config : gBLSMutexID = 3
DISP/DPI_Set_DrivingCurrent not implement for 6575[LK/LCM] lcm_init()
[DISP] - uboot - DSI_PowerOn. 0x       0,0x       0,0x       0
[DISP] - uboot - DSI_PowerOff. 0x       0,0x       0,0x       0
DISP/DISP_Init, 636