Comparer le texte

Trouver la différence entre deux fichiers texte

Affichage

Vue

Éditeur liveMasquer les espacesCacher identiquesSans retour à la ligne

Niveau de précision

Syntaxe

Traitement

Diffchecker Desktop La façon la plus sécurisée d'utiliser Diffchecker. Obtenez l'application Diffchecker Desktop : vos diffs ne quittent jamais votre ordinateur !Obtenir Desktop

Untitled diff

Créé il y a 2 ansLe diff n'expire jamais

23 suppressions

Lignes
Total
Supprimé

Caractères
Total
Supprimé

Pour continuer à utiliser cette fonctionnalité, passez à Diffchecker Pro Voir les prix

995 lignes

20 ajouts

Lignes
Total
Ajouté

Caractères
Total
Ajouté

Pour continuer à utiliser cette fonctionnalité, passez à Diffchecker Pro Voir les prix

993 lignes

This run of the CFX Release 19.2 Solver started at 11:14:10 on 11 Jul

This run of the CFX Release 19.2 Solver started at 16:01:45 on 15 Jul

2024 by user Emre on DESKTOP-6FIBNC0 (intel_xeon64.sse2_winnt) using

the command:

"C:\Program Files\ANSYS Inc\v192\CFX\bin\perllib\cfx5solve.pl" -batch

-ccl runInput.ccl -fullname "Fluid Flow CFX_001"

Release 19.2

Point Releases and Patches installed:

ANSYS, Inc. Products Release 19.2

SpaceClaim Release 19.2

AIM Release 19.2

Autodyn Release 19.2

LS-DYNA Release 19.2

CFX (includes CFD-Post) Release 19.2

Chemkin Release 19.2

EnSight Release 19.2

FENSAP-ICE Release 19.2

Fluent (includes CFD-Post) Release 19.2

Forte Release 19.2

Polyflow (includes CFD-Post) Release 19.2

TurboGrid Release 19.2

ICEM CFD Release 19.2

Aqwa Release 19.2

Mechanical Products Release 19.2

Icepak (includes CFD-Post) Release 19.2

ACIS Geometry Interface Release 19.2

AutoCAD Geometry Interface Release 19.2

Catia, Version 4 Geometry Interface Release 19.2

Catia, Version 6 Geometry Interface Release 19.2

Creo Elements/Direct Modeling Geometry Interface Release 19.2

Creo Parametric Geometry Interface Release 19.2

Inventor Geometry Interface Release 19.2

JTOpen Geometry Interface Release 19.2

NX Geometry Interface Release 19.2

Parasolid Geometry Interface Release 19.2

Solid Edge Geometry Interface Release 19.2

SOLIDWORKS Geometry Interface Release 19.2

ANSYS, Inc. License Manager Release 19.2

Setting up CFX Solver run ...

+--------------------------------------------------------------------+

| |

| CFX Command Language for Run |

| |

+--------------------------------------------------------------------+

LIBRARY:

CEL:

EXPRESSIONS:

Pidffmoni = massFlowAveAbs(Total Pressure in Stn Frame)@S3 \

Outlet-massFlowAveAbs(Total Pressure in Stn Frame)@R1 Inlet

END

MATERIAL: Air at 25 C

MATERIAL: Air Ideal Gas

Material Description = Air at 25 C and 1 atm (dry)

Material Description = Air Ideal Gas (constant Cp)

Material Group = Air Data, Constant Property Gases

Material Group = Air Data, Calorically Perfect Ideal Gases

Option = Pure Substance

Thermodynamic State = Gas

PROPERTIES:

Option = General Material

EQUATION OF STATE:

Density = 1.185 [kg m^-3]

Molar Mass = 28.96 [kg kmol^-1]

Option = Value

Option = Ideal Gas

END

SPECIFIC HEAT CAPACITY:

Option = Value

Specific Heat Capacity = 1.0044E+03 [J kg^-1 K^-1]

Specific Heat Type = Constant Pressure

END

REFERENCE STATE:

Option = Specified Point

Reference Pressure = 1 [atm]

Reference Specific Enthalpy = 0. [J/kg]

Reference Specific Entropy = 0. [J/kg/K]

Reference Temperature = 25 [C]

END

DYNAMIC VISCOSITY:

Dynamic Viscosity = 1.831E-05 [kg m^-1 s^-1]

Option = Value

END

THERMAL CONDUCTIVITY:

Option = Value

Thermal Conductivity = 2.61E-02 [W m^-1 K^-1]

Thermal Conductivity = 2.61E-2 [W m^-1 K^-1]

END

ABSORPTION COEFFICIENT:

Absorption Coefficient = 0.01 [m^-1]

Option = Value

END

SCATTERING COEFFICIENT:

Option = Value

Scattering Coefficient = 0.0 [m^-1]

END

REFRACTIVE INDEX:

Option = Value

Refractive Index = 1.0 [m m^-1]

END

THERMAL EXPANSIVITY:

Option = Value

Thermal Expansivity = 0.003356 [K^-1]

END

Différences enregistrées

Texte d'origine

Ouvrir un fichier

This run of the CFX Release 19.2 Solver started at 11:14:10 on 11 Jul
 2024 by user Emre on DESKTOP-6FIBNC0 (intel_xeon64.sse2_winnt) using
 the command:
 
  "C:\Program Files\ANSYS Inc\v192\CFX\bin\perllib\cfx5solve.pl" -batch
    -ccl runInput.ccl -fullname "Fluid Flow CFX_001"
 
 Release 19.2
 
  Point Releases and Patches installed:
  ANSYS, Inc. Products Release 19.2
  SpaceClaim Release 19.2
  AIM Release 19.2
  Autodyn Release 19.2
  LS-DYNA Release 19.2
  CFX (includes CFD-Post) Release 19.2
  Chemkin Release 19.2
  EnSight Release 19.2
  FENSAP-ICE Release 19.2
  Fluent (includes CFD-Post) Release 19.2
  Forte Release 19.2
  Polyflow (includes CFD-Post) Release 19.2
  TurboGrid Release 19.2
  ICEM CFD Release 19.2
  Aqwa Release 19.2
  Mechanical Products Release 19.2
  Icepak (includes CFD-Post) Release 19.2
  ACIS Geometry Interface Release 19.2
  AutoCAD Geometry Interface Release 19.2
  Catia, Version 4 Geometry Interface Release 19.2
  Catia, Version 6 Geometry Interface Release 19.2
  Creo Elements/Direct Modeling Geometry Interface Release 19.2
  Creo Parametric Geometry Interface Release 19.2
  Inventor Geometry Interface Release 19.2
  JTOpen Geometry Interface Release 19.2
  NX Geometry Interface Release 19.2
  Parasolid Geometry Interface  Release 19.2
  Solid Edge Geometry Interface Release 19.2
  SOLIDWORKS Geometry Interface Release 19.2
  ANSYS, Inc. License Manager Release 19.2
 
 Setting up CFX Solver run ...
 
 
 +--------------------------------------------------------------------+
 |                                                                    |
 |                    CFX Command Language for Run                    |
 |                                                                    |
 +--------------------------------------------------------------------+
 
 LIBRARY:
   CEL:
     EXPRESSIONS:
       Pidffmoni = massFlowAveAbs(Total Pressure in Stn Frame)@S3 \
         Outlet-massFlowAveAbs(Total Pressure in Stn Frame)@R1 Inlet
     END
   END
   MATERIAL: Air at 25 C
     Material Description = Air at 25 C and 1 atm (dry)
     Material Group = Air Data, Constant Property Gases
     Option = Pure Substance
     Thermodynamic State = Gas
     PROPERTIES:
       Option = General Material
       EQUATION OF STATE:
         Density = 1.185 [kg m^-3]
         Molar Mass = 28.96 [kg kmol^-1]
         Option = Value
       END
       SPECIFIC HEAT CAPACITY:
         Option = Value
         Specific Heat Capacity = 1.0044E+03 [J kg^-1 K^-1]
         Specific Heat Type = Constant Pressure
       END
       REFERENCE STATE:
         Option = Specified Point
         Reference Pressure = 1 [atm]
         Reference Specific Enthalpy = 0. [J/kg]
         Reference Specific Entropy = 0. [J/kg/K]
         Reference Temperature = 25 [C]
       END
       DYNAMIC VISCOSITY:
         Dynamic Viscosity = 1.831E-05 [kg m^-1 s^-1]
         Option = Value
       END
       THERMAL CONDUCTIVITY:
         Option = Value
         Thermal Conductivity = 2.61E-02 [W m^-1 K^-1]
       END
       ABSORPTION COEFFICIENT:
         Absorption Coefficient = 0.01 [m^-1]
         Option = Value
       END
       SCATTERING COEFFICIENT:
         Option = Value
         Scattering Coefficient = 0.0 [m^-1]
       END
       REFRACTIVE INDEX:
         Option = Value
         Refractive Index = 1.0 [m m^-1]
       END
       THERMAL EXPANSIVITY:
         Option = Value
         Thermal Expansivity = 0.003356 [K^-1]
       END
     END
   END
 END
 FLOW: Flow Analysis 1
   SOLUTION UNITS:
     Angle Units = [rad]
     Length Units = [m]
     Mass Units = [kg]
     Solid Angle Units = [sr]
     Temperature Units = [K]
     Time Units = [s]
   END
   ANALYSIS TYPE:
     Option = Steady State
     EXTERNAL SOLVER COUPLING:
       Option = None
     END
   END
   DOMAIN: R1
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage
     BOUNDARY: R1 Blade
       Boundary Type = WALL
       Frame Type = Rotating
       Location = BLADE
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R1 Hub
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = HUB
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R1 Inlet
       Boundary Type = INLET
       Frame Type = Stationary
       Location = INFLOW
       BOUNDARY CONDITIONS:
         FLOW DIRECTION:
           Option = Normal to Boundary Condition
         END
         FLOW REGIME:
           Option = Subsonic
         END
         HEAT TRANSFER:
           Option = Stationary Frame Total Temperature
           Stationary Frame Total Temperature = 288 [K]
         END
         MASS AND MOMENTUM:
           Option = Stationary Frame Total Pressure
           Relative Pressure = 1 [atm]
         END
         TURBULENCE:
           Option = Medium Intensity and Eddy Viscosity Ratio
         END
       END
     END
     BOUNDARY: R1 Shroud
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = SHROUD
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R1 to R1 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R1 to R1 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 to R1 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Alternate Rotation Model = true
         Angular Velocity = 19451 [rev min^-1]
         Option = Rotating
         AXIS DEFINITION:
           Option = Coordinate Axis
           Rotation Axis = Coord 0.3
         END
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Fluid 1
       Material = Air at 25 C
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: R2
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 3
     BOUNDARY: R2 Blade
       Boundary Type = WALL
       Frame Type = Rotating
       Location = BLADE 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R2 Hub
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = HUB 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R2 Shroud
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = SHROUD 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R2 to R2 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R2 to R2 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R2 to S1 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 to R2 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Alternate Rotation Model = true
         Angular Velocity = 19451 [rev min^-1]
         Option = Rotating
         AXIS DEFINITION:
           Option = Coordinate Axis
           Rotation Axis = Coord 0.3
         END
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Fluid 1
       Material = Air at 25 C
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: R3
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 5
     BOUNDARY: R3 Blade
       Boundary Type = WALL
       Frame Type = Rotating
       Location = BLADE 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R3 Hub
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = HUB 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R3 Shroud
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = SHROUD 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R3 to R3 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R3 to R3 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R3 to S2 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S3 to R3 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Alternate Rotation Model = true
         Angular Velocity = 19451 [rev min^-1]
         Option = Rotating
         AXIS DEFINITION:
           Option = Coordinate Axis
           Rotation Axis = Coord 0.3
         END
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Fluid 1
       Material = Air at 25 C
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: S1
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 2
     BOUNDARY: R2 to S1 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 Blade
       Boundary Type = WALL
       Location = BLADE 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S1 Hub
       Boundary Type = WALL
       Location = HUB 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S1 Shroud
       Boundary Type = WALL
       Location = SHROUD 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S1 to R1 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 to S1 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 to S1 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Option = Stationary
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Fluid 1
       Material = Air at 25 C
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: S2
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 4
     BOUNDARY: R3 to S2 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 Blade
       Boundary Type = WALL
       Location = BLADE 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S2 Hub
       Boundary Type = WALL
       Location = HUB 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S2 Shroud
       Boundary Type = WALL
       Location = SHROUD 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S2 to R2 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 to S2 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 to S2 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Option = Stationary
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Fluid 1
       Material = Air at 25 C
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: S3
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 6
     BOUNDARY: S3 Blade
       Boundary Type = WALL
       Location = BLADE 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S3 Hub
       Boundary Type = WALL
       Location = HUB 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S3 Outlet
       Boundary Type = OUTLET
       Location = OUTFLOW 6
       BOUNDARY CONDITIONS:
         FLOW REGIME:
           Option = Subsonic
         END
         MASS AND MOMENTUM:
           Mass Flow Rate = 13 [kg s^-1]
           Mass Flow Rate Area = Total for All Sectors
           Option = Mass Flow Rate
         END
       END
     END
     BOUNDARY: S3 Shroud
       Boundary Type = WALL
       Location = SHROUD 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S3 to R3 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S3 to S3 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S3 to S3 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Option = Stationary
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Fluid 1
       Material = Air at 25 C
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN INTERFACE: R1 to R1 Periodic 1
     Boundary List1 = R1 to R1 Periodic 1 Side 1
     Boundary List2 = R1 to R1 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: R2 to R2 Periodic 1
     Boundary List1 = R2 to R2 Periodic 1 Side 1
     Boundary List2 = R2 to R2 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: R2 to S1
     Boundary List1 = R2 to S1 Side 1
     Boundary List2 = R2 to S1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: R3 to R3 Periodic 1
     Boundary List1 = R3 to R3 Periodic 1 Side 1
     Boundary List2 = R3 to R3 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: R3 to S2
     Boundary List1 = R3 to S2 Side 1
     Boundary List2 = R3 to S2 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S1 to R1
     Boundary List1 = S1 to R1 Side 1
     Boundary List2 = S1 to R1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S1 to S1 Periodic 1
     Boundary List1 = S1 to S1 Periodic 1 Side 1
     Boundary List2 = S1 to S1 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: S2 to R2
     Boundary List1 = S2 to R2 Side 1
     Boundary List2 = S2 to R2 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S2 to S2 Periodic 1
     Boundary List1 = S2 to S2 Periodic 1 Side 1
     Boundary List2 = S2 to S2 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: S3 to R3
     Boundary List1 = S3 to R3 Side 1
     Boundary List2 = S3 to R3 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S3 to S3 Periodic 1
     Boundary List1 = S3 to S3 Periodic 1 Side 1
     Boundary List2 = S3 to S3 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   OUTPUT CONTROL:
     MONITOR OBJECTS:
       MONITOR BALANCES:
         Option = Full
       END
       MONITOR FORCES:
         Option = Full
       END
       MONITOR PARTICLES:
         Option = Full
       END
       MONITOR POINT: Pdifffmoni
         Coord Frame = Coord 0
         Expression Value = Pidffmoni
         Option = Expression
       END
       MONITOR RESIDUALS:
         Option = Full
       END
       MONITOR TOTALS:
         Option = Full
       END
     END
     RESULTS:
       File Compression Level = Default
       Option = Standard
     END
   END
   SOLVER CONTROL:
     Turbulence Numerics = High Resolution
     ADVECTION SCHEME:
       Option = High Resolution
     END
     CONVERGENCE CONTROL:
       Length Scale Option = Conservative
       Maximum Number of Iterations = 500
       Minimum Number of Iterations = 1
       Timescale Control = Auto Timescale
       Timescale Factor = 1.0
     END
     CONVERGENCE CRITERIA:
       Residual Target = 0.000001
       Residual Type = RMS
     END
     DYNAMIC MODEL CONTROL:
       Global Dynamic Model Control = On
     END
   END
 END
 COMMAND FILE:
   Version = 19.2
   Results Version = 19.2
 END
 SIMULATION CONTROL:
   EXECUTION CONTROL:
     EXECUTABLE SELECTION:
       Double Precision = Yes
       Large Problem = No
     END
     INTERPOLATOR STEP CONTROL:
       Runtime Priority = Standard
       MEMORY CONTROL:
         Memory Allocation Factor = 1.0
       END
     END
     PARALLEL HOST LIBRARY:
       HOST DEFINITION: desktop6fibnc0
         Remote Host Name = DESKTOP-6FIBNC0
         Host Architecture String = winnt-amd64
         Installation Root = C:\Program Files\ANSYS Inc\v%v\CFX
       END
     END
     PARTITIONER STEP CONTROL:
       Multidomain Option = Automatic
       Runtime Priority = Standard
       MEMORY CONTROL:
         Memory Allocation Factor = 1.0
       END
       PARTITION SMOOTHING:
         Maximum Partition Smoothing Sweeps = 100
         Option = Smooth
       END
       PARTITIONING TYPE:
         MeTiS Type = k-way
         Option = MeTiS
         Partition Size Rule = Automatic
         Partition Weight Factors = 0.16667, 0.16667, 0.16667, 0.16667, \
           0.16667, 0.16667
       END
     END
     RUN DEFINITION:
       Run Mode = Full
       Solver Input File = Fluid Flow CFX.def
       Solver Results File = C:/Users/Emre/Desktop/yer analizi/Analiz \
         11_pending/dp0_CFX_Solution/Fluid Flow CFX_001.res
     END
     SOLVER STEP CONTROL:
       Runtime Priority = Standard
       MEMORY CONTROL:
         Memory Allocation Factor = 1.0
       END
       PARALLEL ENVIRONMENT:
         Number of Processes = 6
         Start Method = Intel MPI Local Parallel
         Parallel Host List = desktop6fibnc0*6
       END
     END
   END
 END
 
 
 +--------------------------------------------------------------------+
 |                                                                    |
 |                            Partitioning                            |
 |                                                                    |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                                                                    |
 |                     ANSYS(R) CFX(R) Partitioner                    |
 |                                                                    |
 | Release 19.2                                                       |
 | Build 19.2 2018-07-30T09:17:59.849000                              |
 | Mon Jul 30 11:27:23 GMTDT 2018                                     |
 |                                                                    |
 |                        Executable Attributes                       |
 |                                                                    |
 |           double-64bit-int32-archfort-optimised-std-lcomp          |
 |                                                                    |
 | (C) 1996-2018 ANSYS, Inc.                                          |
 |                                                                    |
 | All rights reserved. Unauthorized use, distribution or duplication |
 | is prohibited. This product is subject to U.S. laws governing      |
 | export and re-export. For full Legal Notice, see documentation.    |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                  Job Information at Start of Run                   |
 +--------------------------------------------------------------------+

Run mode:       partitioning run

Host computer:  DESKTOP-6FIBNC0 (PID:4340)

Job started:    Thu Jul 11 11:14:12 2024

+--------------------------------------------------------------------+
 |                        License Information                         |
 +--------------------------------------------------------------------+
 
 License Cap:    ANSYS CFX Solver (> 512K Nodes)
 License Cap:    Multiple Reference Frames
 License Cap:     Parallel
 License ID:     DESKTOP-6FIBNC0-SYSTEM-15824-041104

+--------------------------------------------------------------------+
 |        Memory Allocated for Run  (Actual usage may be less)        |
 +--------------------------------------------------------------------+

| Real       | Integer    | Character | Logical  | Double
 ----------+------------+------------+-----------+----------+----------
 Mwords    |      29.73 |     280.41 |      7.86 |     0.12 |     0.00
 Mbytes    |     226.84 |    1069.66 |      7.49 |     0.46 |     0.00
 ----------+------------+------------+-----------+----------+----------

+--------------------------------------------------------------------+
 |                  Host Memory Information (Mbytes)                  |
 +--------------------------------------------------------------------+
 |          Host           |     System     |   Allocated    |   %    |
 +-------------------------+----------------+----------------+--------+
 | DESKTOP-6FIBNC0         |     16222.22   |      1304.45   |   8.04 |
 +-------------------------+----------------+----------------+--------+

+--------------------------------------------------------------------+
 | The MeTiS partitioning method allocates additional memory.         |
 | Total memory usage will therefore exceed the values shown above.   |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                      Topology Simplification                       |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                       ****** Warning ******                        |
 |                                                                    |
 | Topology simplification is activated with the following            |
 | restrictions:                                                      |
 |                                                                    |
 | - Mesh regions referenced only within User Fortran and NOT         |
 |   in the command file will cause the solver to stop.               |
 | - The solver will stop during any "Edit Run in Progress" step      |
 |   if new 2D regions are referenced.                                |
 +--------------------------------------------------------------------+

Domain Name : R1

Total Number of Nodes                                =     1080078

Total Number of Elements                             =     1037750
         Total Number of Hexahedrons                      =     1037750

Total Number of Faces                                =       83810

Domain Name : R2

Total Number of Nodes                                =     1015612

Total Number of Elements                             =      976752
         Total Number of Hexahedrons                      =      976752

Total Number of Faces                                =       76962

Domain Name : R3

Total Number of Nodes                                =     1091094

Total Number of Elements                             =     1050200
         Total Number of Hexahedrons                      =     1050200

Total Number of Faces                                =       81008

Domain Name : S1

Total Number of Nodes                                =     1023774

Total Number of Elements                             =      982150
         Total Number of Hexahedrons                      =      982150

Total Number of Faces                                =       82386

Domain Name : S2

Total Number of Nodes                                =     1002558

Total Number of Elements                             =      965050
         Total Number of Hexahedrons                      =      965050

Total Number of Faces                                =       74302

Domain Name : S3

Total Number of Nodes                                =      988512

Total Number of Elements                             =      946731
         Total Number of Hexahedrons                      =      946731

Total Number of Faces                                =       82672
 
 Global Statistics :

Global Number of Nodes                               =     6201628

Global Number of Elements                            =     5958633
         Total Number of Hexahedrons                      =     5958633

Global Number of Faces                               =      481140

Domain Interface Name : R1 to R1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to R2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to S1

Discretization type                                  =         GGI
     Intersection type                                    =      Direct
     Non-overlap area fraction on side 1                  =    6.25E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       0.913
     Pitch angle for side 1 [degrees]                     =      15.652
     Pitch angle for side 2 [degrees]                     =      17.143
     Number of stage groups                               =          34

Domain Interface Name : R3 to R3 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R3 to S2

Discretization type                                  =         GGI
     Intersection type                                    =      Direct
     Non-overlap area fraction on side 1                  =    2.17E-02
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       0.934
     Pitch angle for side 1 [degrees]                     =      14.400
     Pitch angle for side 2 [degrees]                     =      15.652
     Number of stage groups                               =          34

Domain Interface Name : S1 to R1

Discretization type                                  =         GGI
     Intersection type                                    =      Direct
     Non-overlap area fraction on side 1                  =    2.05E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       1.000
     Pitch angle for side 1 [degrees]                     =      17.143
     Pitch angle for side 2 [degrees]                     =      17.143
     Number of stage groups                               =          34

Domain Interface Name : S1 to S1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S2 to R2

Discretization type                                  =         GGI
     Intersection type                                    =      Direct
     Non-overlap area fraction on side 1                  =    5.11E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       1.000
     Pitch angle for side 1 [degrees]                     =      15.652
     Pitch angle for side 2 [degrees]                     =      15.652
     Number of stage groups                               =          34

Domain Interface Name : S2 to S2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S3 to R3

Discretization type                                  =         GGI
     Intersection type                                    =      Direct
     Non-overlap area fraction on side 1                  =    8.47E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       1.000
     Pitch angle for side 1 [degrees]                     =      14.400
     Pitch angle for side 2 [degrees]                     =      14.400
     Number of stage groups                               =          28

Domain Interface Name : S3 to S3 Periodic 1

Discretization type                                  =         1:1

+--------------------------------------------------------------------+
 |                     Vertex Based Partitioning                      |
 +--------------------------------------------------------------------+

Coupled partitioning of domains:  
   R1
   S1
   R2
   S2
   R3
   S3

- Partitioning tool:       MeTiS multilevel k-way algorithm
 - Number of partitions:             6
 - Number of graph-nodes:      6162028
 - Number of graph-edges:     37226124

+--------------------------------------------------------------------+
 |                 Iso-Partition Connection Statistics                |
 +--------------------------------------------------------------------+
 | Domains in Group          |        |           Vertices            |
 |                           | Smooth +---------+----------+----------+
 |                           | Sweeps |  Moves  |   <25%   |   <50%   |
 +---------------------------+--------+---------+----------+----------+
 | R1,S1,R2,S2,R3,S3,        |     3  |     108 |       0  |       0  |
 +---------------------------+--------+---------+----------+----------+

+--------------------------------------------------------------------+
 |                      Partitioning Information                      |
 +--------------------------------------------------------------------+

Partitioning information for domains:  
   R1
   S1
   R2
   S2
   R3
   S3

+------------------+------------------------+-----------------+
        |     Elements     |        Vertices        |     Faces       |
 +------+------------------+------------------------+-----------------+
 | Part |   Number     %   |   Number     %   %Ovlp |  Number     %   |
 +------+------------------+------------------------+-----------------+
 | Full |   5958633        |   6201628              |   481140        |
 +------+------------------+------------------------+-----------------+
 |    1 |    994856   16.6 |   1042568   16.6   1.3 |    81117   16.7 |
 |    2 |   1006152   16.8 |   1048244   16.7   0.6 |    77268   15.9 |
 |    3 |    993843   16.6 |   1042444   16.6   1.3 |    83352   17.2 |
 |    4 |    998038   16.7 |   1045002   16.7   1.3 |    79899   16.5 |
 |    5 |    991482   16.6 |   1040086   16.6   0.6 |    90278   18.6 |
 |    6 |   1005859   16.8 |   1048673   16.7   1.2 |    72683   15.0 |
 +------+------------------+------------------------+-----------------+
 | Min  |    991482   16.6 |   1040086   16.6   0.6 |    72683   15.0 |
 |(part)|           (    5)|           (    5     5)|          (    6)|
 +------+------------------+------------------------+-----------------+
 | Max  |   1006152   16.8 |   1048673   16.7   1.3 |    90278   18.6 |
 |(part)|           (    2)|           (    6     1)|          (    5)|
 +------+------------------+------------------------+-----------------+
 | Ave  |    998372   16.7 |   1044503   16.7   1.0 |    80766   16.7 |
 +------+------------------+------------------------+-----------------+
 | Sum  |   5990230  100.0 |   6267017  100.0       |   484597  100.0 |
 +------+------------------+------------------------+-----------------+

+--------------------------------------------------------------------+
 |                 Partitioning CPU-Time Requirements                 |
 +--------------------------------------------------------------------+
 GGI Intersection               9.96E-01    5.7 %
 Preparations                   1.98E+00   11.4 %
 Low-level Mesh Partitioning    3.05E+00   17.5 %
 File Reading                   1.11E+00    6.4 %
 Partition Smoothing            1.72E+00    9.9 %
 Topology - Domain Interface    2.42E-01    1.4 %
 Topology - Global              1.02E-01    0.6 %
 Topology - Element/Face/Patch  3.60E-01    2.1 %
 Topology - Vertex              6.30E-02    0.4 %
 Data Compression               1.10E-02    0.1 %
 Variable Updates               4.00E-03    0.0 %
 File Writing                   4.02E-01    2.3 %
 Miscellaneous                  7.40E+00   42.4 %
                                --------
 Total                          1.74E+01

+--------------------------------------------------------------------+
 |                   Job Information at End of Run                    |
 +--------------------------------------------------------------------+

Host computer:  DESKTOP-6FIBNC0 (PID:4340)

Job finished:   Thu Jul 11 11:14:29 2024

Total wall clock time: 1.744E+01 seconds
             or: (          0:         0:         0:    17.443 )
                 (       Days:     Hours:   Minutes:   Seconds )

+--------------------------------------------------------------------+
 |                                                                    |
 |                               Solver                               |
 |                                                                    |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                                                                    |
 |                       ANSYS(R) CFX(R) Solver                       |
 |                                                                    |
 | Release 19.2                                                       |
 | Build 19.2 2018-07-30T09:17:59.849000                              |
 | Mon Jul 30 11:27:23 GMTDT 2018                                     |
 |                                                                    |
 |                        Executable Attributes                       |
 |                                                                    |
 |           double-64bit-int32-archfort-optimised-std-lcomp          |
 |                                                                    |
 | (C) 1996-2018 ANSYS, Inc.                                          |
 |                                                                    |
 | All rights reserved. Unauthorized use, distribution or duplication |
 | is prohibited. This product is subject to U.S. laws governing      |
 | export and re-export. For full Legal Notice, see documentation.    |
 +--------------------------------------------------------------------+

Run mode:       parallel run (MPI)

Job started:    Thu Jul 11 11:14:31 2024

Allocated storage in:    Mwords
                          Mbytes

Partition | Real       | Integer    | Character | Logical  | Double
 ----------+------------+------------+-----------+----------+----------
   Minimum |     247.19 |      70.64 |      8.31 |     0.12 |     0.01
  (     2) |    1885.90 |     269.48 |      7.92 |     0.11 |     0.06
 ----------+------------+------------+-----------+----------+----------
   Maximum |     311.43 |      74.40 |      8.31 |     0.12 |     0.01
  (     4) |    2376.06 |     283.81 |      7.92 |     0.11 |     0.06
 ----------+------------+------------+-----------+----------+----------
   Average |     286.83 |      72.78 |      8.31 |     0.12 |     0.01
           |    2188.33 |     277.63 |      7.92 |     0.11 |     0.06
 ----------+------------+------------+-----------+----------+----------
     Total |    1720.97 |     436.68 |     49.85 |     0.72 |     0.05
           |   13129.99 |    1665.79 |     47.54 |     0.69 |     0.38
 ----------+------------+------------+-----------+----------+----------

+--------------------------------------------------------------------+
 |                  Host Memory Information (Mbytes)                  |
 +--------------------------------------------------------------------+
 |           Host         | Npart |   System    |  Allocated  |   %   |
 +------------------------+-------+-------------+-------------+-------+
 | DESKTOP-6FIBNC0        |    6  |    16222.22 |    14844.38 | 91.51 |
 +------------------------+-------+-------------+-------------+-------+

+--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 | The Wall Heat Transfer Coefficient written to the results file for |
 | any turbulent phase with heat transfer is based on the turbulent   |
 | wall function coefficient. It is consistent with the Wall Heat Flux|
 | the wall temperature, and the Wall Adjacent Temperature            |
 | (near-wall temperature).  If you would like it to be based on a    |
 | user-specified bulk temperature instead, please set the expert     |
 | parameter "tbulk for htc = <value>".                               |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                          Mesh Statistics                           |
 +--------------------------------------------------------------------+
 | Domain Name          | Orthog. Angle | Exp. Factor  | Aspect Ratio |
 +----------------------+---------------+--------------+--------------+
 |                      | Minimum [deg] |   Maximum    |    Maximum   |
 +----------------------+---------------+--------------+--------------+
 | R1                   |       48.8 ok |         2 OK |       649 OK |
 | R2                   |       63.9 OK |         2 OK |       442 OK |
 | R3                   |       61.6 OK |         2 OK |       378 OK |
 | S1                   |       49.1 ok |         2 OK |       547 OK |
 | S2                   |       57.1 OK |         2 OK |       410 OK |
 | S3                   |        9.5  ! |         3 OK |       480 OK |
 | Global               |        9.5  ! |         3 OK |       649 OK |
 +----------------------+---------------+--------------+--------------+
 |                      |  %!  %ok  %OK | %!  %ok  %OK | %!  %ok  %OK |
 +----------------------+---------------+--------------+--------------+
 | R1                   |   0   <1  100 |  0    0  100 |  0    0  100 |
 | R2                   |   0    0  100 |  0    0  100 |  0    0  100 |
 | R3                   |   0    0  100 |  0    0  100 |  0    0  100 |
 | S1                   |   0   <1  100 |  0    0  100 |  0    0  100 |
 | S2                   |   0    0  100 |  0    0  100 |  0    0  100 |
 | S3                   |  <1    1   99 |  0    0  100 |  0    0  100 |
 | Global               |  <1   <1  100 |  0    0  100 |  0    0  100 |
 +----------------------+---------------+--------------+--------------+

Domain Name : R1

Total Number of Nodes                                =     1080078

Total Number of Elements                             =     1037750
         Total Number of Hexahedrons                      =     1037750

Total Number of Faces                                =       83810

Domain Name : R2

Total Number of Nodes                                =     1015612

Total Number of Elements                             =      976752
         Total Number of Hexahedrons                      =      976752

Total Number of Faces                                =       76962

Domain Name : R3

Total Number of Nodes                                =     1091094

Total Number of Elements                             =     1050200
         Total Number of Hexahedrons                      =     1050200

Total Number of Faces                                =       81008

Domain Name : S1

Total Number of Nodes                                =     1023774

Total Number of Elements                             =      982150
         Total Number of Hexahedrons                      =      982150

Total Number of Faces                                =       82386

Domain Name : S2

Total Number of Nodes                                =     1002558

Total Number of Elements                             =      965050
         Total Number of Hexahedrons                      =      965050

Total Number of Faces                                =       74302

Domain Name : S3

Total Number of Nodes                                =      988512

Total Number of Elements                             =      946731
         Total Number of Hexahedrons                      =      946731

Total Number of Faces                                =       82672
 
 Global Statistics :

Global Number of Nodes                               =     6201628

Global Number of Elements                            =     5958633
         Total Number of Hexahedrons                      =     5958633

Global Number of Faces                               =      481140

Domain Interface Name : R1 to R1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to R2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to S1

Discretization type                                  =         GGI
     Intersection type                                    = Partitioner
     Non-overlap area fraction on side 1                  =    6.25E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       0.913
     Pitch angle for side 1 [degrees]                     =      15.652
     Pitch angle for side 2 [degrees]                     =      17.143
     Number of stage groups                               =          34

Domain Interface Name : R3 to R3 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R3 to S2

Discretization type                                  =         GGI
     Intersection type                                    = Partitioner
     Non-overlap area fraction on side 1                  =    2.17E-02
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       0.934
     Pitch angle for side 1 [degrees]                     =      14.400
     Pitch angle for side 2 [degrees]                     =      15.652
     Number of stage groups                               =          34

Domain Interface Name : S1 to R1

Discretization type                                  =         GGI
     Intersection type                                    = Partitioner
     Non-overlap area fraction on side 1                  =    2.05E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       1.000
     Pitch angle for side 1 [degrees]                     =      17.143
     Pitch angle for side 2 [degrees]                     =      17.143
     Number of stage groups                               =          34

Domain Interface Name : S1 to S1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S2 to R2

Discretization type                                  =         GGI
     Intersection type                                    = Partitioner
     Non-overlap area fraction on side 1                  =    5.11E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       1.000
     Pitch angle for side 1 [degrees]                     =      15.652
     Pitch angle for side 2 [degrees]                     =      15.652
     Number of stage groups                               =          34

Domain Interface Name : S2 to S2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S3 to R3

Discretization type                                  =         GGI
     Intersection type                                    = Partitioner
     Non-overlap area fraction on side 1                  =    8.47E-08
     Non-overlap area fraction on side 2                  =    0.00E+00
     Pitch ratio ( area side 1 / area side 2 )            =       1.000
     Pitch angle for side 1 [degrees]                     =      14.400
     Pitch angle for side 2 [degrees]                     =      14.400
     Number of stage groups                               =          28

Domain Interface Name : S3 to S3 Periodic 1

Discretization type                                  =         1:1

+--------------------------------------------------------------------+
 | NOTE: The Total Mass Flow Rate option computes sector angle from   |
 | the domain rotational periodic interface.                          |
 | The computed sector angle for: S3 Outlet   =      14.400 [degrees] |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |                  User Defined Monitor Information                  |
 +--------------------------------------------------------------------+

Monitor Point: Pdifffmoni

+--------------------------------------------------------------------+
 |                     Average Scale Information                      |
 +--------------------------------------------------------------------+

Domain Name : R1
     Global Length                                         = 4.8212E-02
     Minimum Extent                                        = 4.1500E-02
     Maximum Extent                                        = 8.8248E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.8685E+02
     Advection Time                                        = 1.6808E-04
     Reynolds Number                                       = 8.9502E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01

Domain Name : R2
     Global Length                                         = 4.4113E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 6.7287E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 3.3334E+02
     Advection Time                                        = 1.3233E-04
     Reynolds Number                                       = 9.5166E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01

Domain Name : R3
     Global Length                                         = 4.1170E-02
     Minimum Extent                                        = 4.5130E-02
     Maximum Extent                                        = 5.2146E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 3.8178E+02
     Advection Time                                        = 1.0784E-04
     Reynolds Number                                       = 1.0172E+06
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01

Domain Name : S1
     Global Length                                         = 4.5427E-02
     Minimum Extent                                        = 3.8500E-02
     Maximum Extent                                        = 7.8332E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 1.6765E+02
     Advection Time                                        = 2.7096E-04
     Reynolds Number                                       = 4.9290E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01

Domain Name : S2
     Global Length                                         = 4.2664E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 5.8926E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.2567E+02
     Advection Time                                        = 1.8905E-04
     Reynolds Number                                       = 6.2312E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01

Domain Name : S3
     Global Length                                         = 3.9060E-02
     Minimum Extent                                        = 4.3000E-02
     Maximum Extent                                        = 4.5335E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.8835E+02
     Advection Time                                        = 1.3546E-04
     Reynolds Number                                       = 7.2891E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01

+--------------------------------------------------------------------+
 |                Checking for Isolated Fluid Regions                 |
 +--------------------------------------------------------------------+
 
 No isolated fluid regions were found.

+--------------------------------------------------------------------+
 |              The Equations Solved in This Calculation              |
 +--------------------------------------------------------------------+
 
 Equations are given two labels: the individual name and a combined 
 name used for combining residuals together.  Residuals for multidomain 
 problems are combined provided the domains are connected together and 
 have the same domain type (solid or fluid/porous).  If there are 
 multiple groups of the same domain type, then the group residual is 
 identified by the name of the first domain in the connected group. 
 
 The individual and combined equation names are given below.

Subsystem : Wall Scale

Wallscale-R1                              --> Wallscale
   Wallscale-S1                              --> Wallscale
   Wallscale-R2                              --> Wallscale
   Wallscale-S2                              --> Wallscale
   Wallscale-R3                              --> Wallscale
   Wallscale-S3                              --> Wallscale

Subsystem : Momentum and Mass

U-Mom-R1                                  --> U-Mom
   V-Mom-R1                                  --> V-Mom
   W-Mom-R1                                  --> W-Mom
   P-Mass-R1                                 --> P-Mass
   U-Mom-S1                                  --> U-Mom
   V-Mom-S1                                  --> V-Mom
   W-Mom-S1                                  --> W-Mom
   P-Mass-S1                                 --> P-Mass
   U-Mom-R2                                  --> U-Mom
   V-Mom-R2                                  --> V-Mom
   W-Mom-R2                                  --> W-Mom
   P-Mass-R2                                 --> P-Mass
   U-Mom-S2                                  --> U-Mom
   V-Mom-S2                                  --> V-Mom
   W-Mom-S2                                  --> W-Mom
   P-Mass-S2                                 --> P-Mass
   U-Mom-R3                                  --> U-Mom
   V-Mom-R3                                  --> V-Mom
   W-Mom-R3                                  --> W-Mom
   P-Mass-R3                                 --> P-Mass
   U-Mom-S3                                  --> U-Mom
   V-Mom-S3                                  --> V-Mom
   W-Mom-S3                                  --> W-Mom
   P-Mass-S3                                 --> P-Mass

Subsystem : Heat Transfer

H-Energy-R1                               --> H-Energy
   H-Energy-S1                               --> H-Energy
   H-Energy-R2                               --> H-Energy
   H-Energy-S2                               --> H-Energy
   H-Energy-R3                               --> H-Energy
   H-Energy-S3                               --> H-Energy

Subsystem : TurbKE and TurbFreq

K-TurbKE-R1                               --> K-TurbKE
   O-TurbFreq-R1                             --> O-TurbFreq
   K-TurbKE-S1                               --> K-TurbKE
   O-TurbFreq-S1                             --> O-TurbFreq
   K-TurbKE-R2                               --> K-TurbKE
   O-TurbFreq-R2                             --> O-TurbFreq
   K-TurbKE-S2                               --> K-TurbKE
   O-TurbFreq-S2                             --> O-TurbFreq
   K-TurbKE-R3                               --> K-TurbKE
   O-TurbFreq-R3                             --> O-TurbFreq
   K-TurbKE-S3                               --> K-TurbKE
   O-TurbFreq-S3                             --> O-TurbFreq
                   
 CFD Solver started: Thu Jul 11 11:16:31 2024

+--------------------------------------------------------------------+
 |                       Convergence History                          |
 +--------------------------------------------------------------------+

======================================================================
 OUTER LOOP ITERATION =    1                    CPU SECONDS = 9.526E+02
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.00 | 2.4E-04 | 1.4E-03 | 43.0  2.0E-01  ok|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.00 | 4.8E-05 | 2.6E-03 |       1.9E+00  ok|
 | V-Mom                | 0.00 | 5.4E-04 | 2.2E-02 |       7.1E-01  ok|
 | W-Mom                | 0.00 | 1.6E-03 | 4.7E-02 |       1.6E-01  ok|
 | P-Mass               | 0.00 | 1.4E-02 | 3.5E-01 |  9.2  2.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   0.4% of the faces,   0.3% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.00 | 2.7E-02 | 8.8E-01 |  5.7  6.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.00 | 1.7E-02 | 4.1E-01 |  5.7  2.2E-02  OK|
 | O-TurbFreq           | 0.00 | 8.5E-02 | 1.0E+00 |  7.8  1.0E-02  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    2                    CPU SECONDS = 2.117E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.47 | 1.1E-04 | 3.9E-03 | 43.0  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                |38.75 | 1.9E-03 | 5.8E-02 |       6.8E-02  OK|
 | V-Mom                |28.52 | 1.5E-02 | 3.2E-01 |       3.9E-02  OK|
 | W-Mom                | 7.46 | 1.2E-02 | 3.4E-01 |       3.4E-02  OK|
 | P-Mass               | 0.06 | 8.6E-04 | 2.5E-02 |  9.2  4.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   8.8% of the faces,   5.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.54 | 1.5E-02 | 5.3E-01 |  5.7  9.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 6.15 | 1.0E-01 | 1.6E+00 |  5.7  6.8E-03  OK|
 | O-TurbFreq           | 0.76 | 6.5E-02 | 3.6E-01 |  7.8  8.0E-05  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    3                    CPU SECONDS = 3.376E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.36 | 4.0E-05 | 1.5E-03 | 43.0  9.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.31 | 2.5E-03 | 9.9E-02 |       1.7E-01  ok|
 | V-Mom                | 1.29 | 2.0E-02 | 4.8E-01 |       8.0E-02  OK|
 | W-Mom                | 1.22 | 1.5E-02 | 3.8E-01 |       1.2E-01  ok|
 | P-Mass               | 1.72 | 1.5E-03 | 6.2E-02 |  5.1  2.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.9% of the faces,   6.8% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.07 | 1.6E-02 | 5.0E-01 | 10.5  2.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.14 | 1.4E-02 | 5.7E-01 |  5.7  2.0E-02  OK|
 | O-TurbFreq           | 0.49 | 3.2E-02 | 3.8E-01 | 11.7  2.4E-05  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    4                    CPU SECONDS = 4.331E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.40 | 1.6E-05 | 6.9E-04 | 43.0  9.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.67 | 1.6E-03 | 6.5E-02 |       1.8E-01  ok|
 | V-Mom                | 0.69 | 1.4E-02 | 3.9E-01 |       8.6E-02  OK|
 | W-Mom                | 0.67 | 1.0E-02 | 3.5E-01 |       1.3E-01  ok|
 | P-Mass               | 1.33 | 2.0E-03 | 6.1E-02 |  5.1  2.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.8% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.29 | 2.1E-02 | 8.9E-01 | 10.5  6.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.89 | 1.3E-02 | 4.6E-01 |  5.7  2.3E-02  OK|
 | O-TurbFreq           | 0.57 | 1.8E-02 | 3.0E-01 | 11.6  6.4E-05  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    5                    CPU SECONDS = 5.258E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.42 | 6.8E-06 | 3.6E-04 | 43.0  9.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.79 | 1.3E-03 | 5.5E-02 |       1.8E-01  ok|
 | V-Mom                | 0.65 | 8.8E-03 | 3.1E-01 |       9.4E-02  OK|
 | W-Mom                | 0.67 | 6.7E-03 | 2.5E-01 |       1.3E-01  ok|
 | P-Mass               | 0.32 | 6.3E-04 | 2.5E-02 |  5.1  2.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.4% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.55 | 1.1E-02 | 5.5E-01 | 10.5  9.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.80 | 2.3E-02 | 8.2E-01 |  5.7  1.8E-02  OK|
 | O-TurbFreq           | 0.64 | 1.2E-02 | 3.3E-01 | 11.6  1.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    6                    CPU SECONDS = 6.250E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.43 | 3.0E-06 | 1.9E-04 | 38.4  9.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.76 | 9.8E-04 | 6.1E-02 |       1.7E-01  ok|
 | V-Mom                | 0.58 | 5.1E-03 | 1.8E-01 |       1.0E-01  ok|
 | W-Mom                | 0.63 | 4.2E-03 | 1.5E-01 |       1.3E-01  ok|
 | P-Mass               | 0.47 | 3.0E-04 | 1.5E-02 |  5.1  5.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.4% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.31 | 3.5E-03 | 1.6E-01 | 10.5  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.92 | 2.1E-02 | 8.9E-01 |  5.7  2.9E-02  OK|
 | O-TurbFreq           | 0.69 | 8.1E-03 | 2.8E-01 | 11.6  1.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    7                    CPU SECONDS = 7.262E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.45 | 1.3E-06 | 1.0E-04 | 38.4  9.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.92 | 9.0E-04 | 5.0E-02 |       1.6E-01  ok|
 | V-Mom                | 0.65 | 3.3E-03 | 1.6E-01 |       1.1E-01  ok|
 | W-Mom                | 0.72 | 3.0E-03 | 1.1E-01 |       1.3E-01  ok|
 | P-Mass               | 0.64 | 1.9E-04 | 1.2E-02 |  5.1  7.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.5% of the faces,   7.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.81 | 2.9E-03 | 1.4E-01 | 10.5  4.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.37 | 7.8E-03 | 3.1E-01 |  5.7  9.4E-02  OK|
 | O-TurbFreq           | 0.58 | 4.7E-03 | 1.6E-01 | 11.6  3.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    8                    CPU SECONDS = 8.189E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.48 | 6.3E-07 | 5.7E-05 | 33.7  9.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 8.6E-04 | 3.8E-02 |       5.1E-02  OK|
 | V-Mom                | 0.71 | 2.4E-03 | 1.3E-01 |       3.9E-02  OK|
 | W-Mom                | 0.81 | 2.4E-03 | 9.5E-02 |       4.4E-02  OK|
 | P-Mass               | 0.72 | 1.4E-04 | 1.0E-02 |  9.2  4.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.7% of the faces,   7.7% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 3.0E-03 | 3.3E-01 | 10.5  3.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.77 | 6.0E-03 | 2.3E-01 |  5.7  8.1E-02  OK|
 | O-TurbFreq           | 0.66 | 3.1E-03 | 1.1E-01 | 11.6  6.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    9                    CPU SECONDS = 9.283E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.05 | 9.0E-04 | 3.6E-02 |       5.4E-02  OK|
 | V-Mom                | 0.85 | 2.0E-03 | 1.1E-01 |       4.3E-02  OK|
 | W-Mom                | 0.93 | 2.3E-03 | 8.8E-02 |       5.2E-02  OK|
 | P-Mass               | 0.86 | 1.2E-04 | 1.3E-02 |  9.2  8.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.7% of the faces,   7.7% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 2.8E-03 | 2.4E-01 | 10.5  2.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.9E-03 | 2.3E-01 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.73 | 2.3E-03 | 8.6E-02 | 11.7  7.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   10                    CPU SECONDS = 1.015E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.07 | 9.6E-04 | 4.4E-02 |       2.2E-02  OK|
 | V-Mom                | 0.86 | 1.7E-03 | 1.1E-01 |       1.9E-02  OK|
 | W-Mom                | 0.97 | 2.2E-03 | 9.7E-02 |       2.8E-02  OK|
 | P-Mass               | 0.89 | 1.0E-04 | 1.4E-02 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.7% of the faces,   7.8% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.87 | 2.4E-03 | 1.8E-01 | 10.5  3.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.91 | 5.4E-03 | 2.4E-01 |  5.7  3.2E-02  OK|
 | O-TurbFreq           | 0.92 | 2.1E-03 | 1.1E-01 | 11.7  1.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   11                    CPU SECONDS = 1.105E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.15 | 1.1E-03 | 6.5E-02 |       2.5E-02  OK|
 | V-Mom                | 0.99 | 1.7E-03 | 1.0E-01 |       2.1E-02  OK|
 | W-Mom                | 1.04 | 2.3E-03 | 9.9E-02 |       3.4E-02  OK|
 | P-Mass               | 0.96 | 1.0E-04 | 1.4E-02 | 13.2  8.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.7% of the faces,   7.8% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 2.2E-03 | 1.5E-01 | 10.4  3.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.83 | 4.5E-03 | 2.7E-01 |  5.7  2.6E-02  OK|
 | O-TurbFreq           | 0.98 | 2.1E-03 | 9.1E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   12                    CPU SECONDS = 1.201E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.17 | 1.3E-03 | 8.0E-02 |       2.4E-02  OK|
 | V-Mom                | 0.96 | 1.6E-03 | 1.0E-01 |       2.2E-02  OK|
 | W-Mom                | 1.00 | 2.3E-03 | 1.2E-01 |       3.3E-02  OK|
 | P-Mass               | 0.97 | 9.7E-05 | 1.1E-02 | 13.2  9.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.4% of the faces,   7.7% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 2.0E-03 | 1.0E-01 | 10.4  3.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.90 | 4.0E-03 | 3.3E-01 |  5.7  2.7E-02  OK|
 | O-TurbFreq           | 0.92 | 1.9E-03 | 6.5E-02 | 11.6  1.3E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   13                    CPU SECONDS = 1.299E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.14 | 1.5E-03 | 1.0E-01 |       2.2E-02  OK|
 | V-Mom                | 0.93 | 1.5E-03 | 9.4E-02 |       2.2E-02  OK|
 | W-Mom                | 0.95 | 2.2E-03 | 1.1E-01 |       3.0E-02  OK|
 | P-Mass               | 0.97 | 9.4E-05 | 8.7E-03 | 13.2  9.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 2.0E-03 | 9.8E-02 | 10.4  2.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.89 | 3.6E-03 | 2.3E-01 |  5.7  3.0E-02  OK|
 | O-TurbFreq           | 0.94 | 1.8E-03 | 7.2E-02 | 11.6  1.5E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   14                    CPU SECONDS = 1.395E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.09 | 1.6E-03 | 1.1E-01 |       1.9E-02  OK|
 | V-Mom                | 0.92 | 1.4E-03 | 8.7E-02 |       2.3E-02  OK|
 | W-Mom                | 0.92 | 2.0E-03 | 8.6E-02 |       2.8E-02  OK|
 | P-Mass               | 0.99 | 9.3E-05 | 9.2E-03 | 13.2  8.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.3% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.9E-03 | 3.4E-01 | 10.4  2.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.90 | 3.2E-03 | 1.8E-01 |  5.7  3.1E-02  OK|
 | O-TurbFreq           | 0.96 | 1.7E-03 | 1.0E-01 | 11.6  1.5E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   15                    CPU SECONDS = 1.486E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.7E-03 | 1.1E-01 |       1.8E-02  OK|
 | V-Mom                | 0.93 | 1.3E-03 | 7.8E-02 |       2.4E-02  OK|
 | W-Mom                | 0.93 | 1.9E-03 | 7.9E-02 |       2.9E-02  OK|
 | P-Mass               | 1.04 | 9.6E-05 | 1.3E-02 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.8% of the faces,   7.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 1.8E-03 | 3.0E-01 | 10.4  2.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.91 | 2.9E-03 | 1.9E-01 |  5.7  3.1E-02  OK|
 | O-TurbFreq           | 0.97 | 1.7E-03 | 1.0E-01 | 11.6  1.4E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   16                    CPU SECONDS = 1.573E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.6E-03 | 1.0E-01 |       1.8E-02  OK|
 | V-Mom                | 0.92 | 1.2E-03 | 7.4E-02 |       2.4E-02  OK|
 | W-Mom                | 0.92 | 1.7E-03 | 7.7E-02 |       2.7E-02  OK|
 | P-Mass               | 1.05 | 1.0E-04 | 9.1E-03 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.0% of the faces,   6.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   0.4% of the faces,   0.1% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.8E-03 | 2.6E-01 | 10.4  2.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 2.8E-03 | 1.9E-01 |  5.7  3.1E-02  OK|
 | O-TurbFreq           | 0.94 | 1.6E-03 | 1.1E-01 | 11.6  1.3E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   17                    CPU SECONDS = 1.661E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.93 | 1.5E-03 | 1.0E-01 |       1.8E-02  OK|
 | V-Mom                | 0.91 | 1.1E-03 | 7.2E-02 |       2.3E-02  OK|
 | W-Mom                | 0.90 | 1.6E-03 | 7.8E-02 |       2.4E-02  OK|
 | P-Mass               | 1.06 | 1.1E-04 | 1.2E-02 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   9.8% of the faces,   6.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   0.7% of the faces,   0.2% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.8E-03 | 2.9E-01 | 10.4  2.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 2.9E-03 | 1.6E-01 |  5.7  3.3E-02  OK|
 | O-TurbFreq           | 0.92 | 1.4E-03 | 1.0E-01 | 11.6  1.2E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   18                    CPU SECONDS = 1.755E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.92 | 1.4E-03 | 1.1E-01 |       1.8E-02  OK|
 | V-Mom                | 0.90 | 9.8E-04 | 6.9E-02 |       2.1E-02  OK|
 | W-Mom                | 0.89 | 1.4E-03 | 8.7E-02 |       2.2E-02  OK|
 | P-Mass               | 1.03 | 1.1E-04 | 1.1E-02 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   9.7% of the faces,   6.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   0.9% of the faces,   0.3% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.8E-03 | 3.5E-01 | 10.4  2.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.06 | 3.1E-03 | 1.5E-01 |  5.7  3.4E-02  OK|
 | O-TurbFreq           | 0.91 | 1.3E-03 | 8.3E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   19                    CPU SECONDS = 1.848E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.93 | 1.3E-03 | 1.4E-01 |       1.8E-02  OK|
 | V-Mom                | 0.92 | 9.0E-04 | 7.2E-02 |       2.0E-02  OK|
 | W-Mom                | 0.91 | 1.3E-03 | 7.7E-02 |       2.1E-02  OK|
 | P-Mass               | 1.01 | 1.1E-04 | 1.1E-02 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   9.7% of the faces,   7.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.0% of the faces,   0.3% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.8E-03 | 3.9E-01 | 10.4  2.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 3.1E-03 | 1.5E-01 |  5.7  3.4E-02  OK|
 | O-TurbFreq           | 0.92 | 1.2E-03 | 8.0E-02 | 11.6  9.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   20                    CPU SECONDS = 1.941E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.94 | 1.2E-03 | 1.5E-01 |       1.8E-02  OK|
 | V-Mom                | 0.94 | 8.4E-04 | 6.9E-02 |       2.1E-02  OK|
 | W-Mom                | 0.94 | 1.2E-03 | 8.4E-02 |       2.3E-02  OK|
 | P-Mass               | 1.00 | 1.1E-04 | 1.1E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   9.8% of the faces,   7.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.1% of the faces,   0.3% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.9E-03 | 2.9E-01 | 10.4  2.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 3.0E-03 | 2.3E-01 |  5.7  3.5E-02  OK|
 | O-TurbFreq           | 0.96 | 1.2E-03 | 6.7E-02 | 11.6  8.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   21                    CPU SECONDS = 2.035E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.90 | 1.1E-03 | 1.1E-01 |       2.0E-02  OK|
 | V-Mom                | 0.95 | 8.0E-04 | 6.4E-02 |       2.2E-02  OK|
 | W-Mom                | 0.96 | 1.1E-03 | 7.6E-02 |       2.4E-02  OK|
 | P-Mass               | 0.99 | 1.1E-04 | 1.3E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   9.9% of the faces,   7.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.8E-03 | 2.9E-01 | 10.4  1.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.93 | 2.8E-03 | 2.3E-01 |  5.7  3.9E-02  OK|
 | O-TurbFreq           | 1.00 | 1.2E-03 | 5.9E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   22                    CPU SECONDS = 2.128E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.90 | 9.8E-04 | 8.7E-02 |       2.0E-02  OK|
 | V-Mom                | 0.93 | 7.4E-04 | 6.2E-02 |       2.3E-02  OK|
 | W-Mom                | 0.96 | 1.1E-03 | 8.1E-02 |       2.6E-02  OK|
 | P-Mass               | 0.98 | 1.1E-04 | 1.3E-02 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.0% of the faces,   7.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.86 | 1.6E-03 | 1.6E-01 | 10.4  1.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.87 | 2.5E-03 | 2.1E-01 |  5.7  4.4E-02  OK|
 | O-TurbFreq           | 1.00 | 1.2E-03 | 6.3E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   23                    CPU SECONDS = 2.225E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.91 | 8.9E-04 | 6.7E-02 |       2.0E-02  OK|
 | V-Mom                | 0.95 | 7.1E-04 | 5.7E-02 |       2.4E-02  OK|
 | W-Mom                | 0.94 | 1.0E-03 | 6.3E-02 |       2.7E-02  OK|
 | P-Mass               | 0.95 | 1.0E-04 | 9.8E-03 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.1% of the faces,   7.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.86 | 1.4E-03 | 1.7E-01 | 10.4  1.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.90 | 2.2E-03 | 2.0E-01 |  5.7  4.5E-02  OK|
 | O-TurbFreq           | 0.98 | 1.1E-03 | 5.7E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   24                    CPU SECONDS = 2.317E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.93 | 8.3E-04 | 5.3E-02 |       2.0E-02  OK|
 | V-Mom                | 0.96 | 6.8E-04 | 4.3E-02 |       2.4E-02  OK|
 | W-Mom                | 0.95 | 9.7E-04 | 5.7E-02 |       2.8E-02  OK|
 | P-Mass               | 0.97 | 9.9E-05 | 8.5E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.1% of the faces,   7.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 1.2E-03 | 1.7E-01 | 10.4  1.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.93 | 2.1E-03 | 1.8E-01 |  5.7  4.4E-02  OK|
 | O-TurbFreq           | 1.00 | 1.1E-03 | 4.9E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   25                    CPU SECONDS = 2.411E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 7.9E-04 | 5.2E-02 |       2.0E-02  OK|
 | V-Mom                | 0.97 | 6.5E-04 | 4.8E-02 |       2.2E-02  OK|
 | W-Mom                | 0.94 | 9.1E-04 | 5.0E-02 |       2.7E-02  OK|
 | P-Mass               | 1.02 | 1.0E-04 | 8.9E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.2% of the faces,   7.3% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 1.1E-03 | 1.7E-01 | 10.4  1.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 1.9E-03 | 1.3E-01 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 0.92 | 1.0E-03 | 5.0E-02 | 11.6  6.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   26                    CPU SECONDS = 2.504E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.90 | 7.1E-04 | 5.0E-02 |       2.1E-02  OK|
 | V-Mom                | 0.92 | 6.0E-04 | 4.7E-02 |       2.2E-02  OK|
 | W-Mom                | 0.90 | 8.2E-04 | 3.7E-02 |       2.7E-02  OK|
 | P-Mass               | 1.03 | 1.0E-04 | 8.5E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.2% of the faces,   7.3% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.93 | 1.1E-03 | 1.7E-01 | 10.4  1.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 2.0E-03 | 1.2E-01 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 0.92 | 9.5E-04 | 5.2E-02 | 11.6  6.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   27                    CPU SECONDS = 2.594E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.88 | 6.3E-04 | 4.7E-02 |       2.3E-02  OK|
 | V-Mom                | 0.90 | 5.4E-04 | 4.7E-02 |       2.2E-02  OK|
 | W-Mom                | 0.88 | 7.2E-04 | 3.2E-02 |       2.7E-02  OK|
 | P-Mass               | 1.01 | 1.1E-04 | 9.3E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.2% of the faces,   7.3% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.88 | 9.3E-04 | 1.3E-01 | 10.4  1.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 1.9E-03 | 1.1E-01 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.90 | 8.6E-04 | 5.4E-02 | 11.6  5.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   28                    CPU SECONDS = 2.693E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.90 | 5.6E-04 | 3.8E-02 |       2.6E-02  OK|
 | V-Mom                | 0.92 | 5.0E-04 | 5.3E-02 |       2.3E-02  OK|
 | W-Mom                | 0.89 | 6.5E-04 | 2.7E-02 |       2.8E-02  OK|
 | P-Mass               | 1.00 | 1.1E-04 | 9.5E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.3% of the faces,   7.4% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.93 | 8.6E-04 | 2.6E-01 | 10.4  1.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.85 | 1.6E-03 | 1.3E-01 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.90 | 7.7E-04 | 5.5E-02 | 11.6  5.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   29                    CPU SECONDS = 2.780E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.94 | 5.3E-04 | 2.7E-02 |       2.8E-02  OK|
 | V-Mom                | 0.93 | 4.6E-04 | 3.9E-02 |       2.7E-02  OK|
 | W-Mom                | 0.92 | 6.0E-04 | 3.8E-02 |       3.0E-02  OK|
 | P-Mass               | 0.99 | 1.1E-04 | 8.8E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.3% of the faces,   7.4% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.88 | 7.6E-04 | 1.6E-01 |  5.7  1.0E-01  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.91 | 1.5E-03 | 1.4E-01 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.94 | 7.2E-04 | 5.3E-02 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   30                    CPU SECONDS = 2.883E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 5.3E-04 | 2.6E-02 |       2.9E-02  OK|
 | V-Mom                | 0.94 | 4.3E-04 | 3.9E-02 |       3.1E-02  OK|
 | W-Mom                | 0.95 | 5.7E-04 | 2.7E-02 |       3.3E-02  OK|
 | P-Mass               | 0.96 | 1.0E-04 | 7.9E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.4% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.89 | 6.8E-04 | 9.5E-02 |  5.7  9.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 1.5E-03 | 1.4E-01 |  5.7  6.4E-02  OK|
 | O-TurbFreq           | 0.97 | 7.0E-04 | 4.9E-02 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   31                    CPU SECONDS = 2.982E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 5.3E-04 | 3.4E-02 |       2.8E-02  OK|
 | V-Mom                | 0.96 | 4.1E-04 | 3.3E-02 |       3.4E-02  OK|
 | W-Mom                | 0.98 | 5.5E-04 | 3.8E-02 |       3.7E-02  OK|
 | P-Mass               | 0.96 | 9.7E-05 | 7.6E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.5% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 6.4E-04 | 8.3E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 1.4E-03 | 1.1E-01 |  5.7  7.3E-02  OK|
 | O-TurbFreq           | 0.96 | 6.7E-04 | 4.5E-02 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   32                    CPU SECONDS = 3.071E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 5.3E-04 | 4.3E-02 |       3.0E-02  OK|
 | V-Mom                | 0.96 | 4.0E-04 | 2.8E-02 |       3.5E-02  OK|
 | W-Mom                | 0.97 | 5.4E-04 | 3.6E-02 |       3.8E-02  OK|
 | P-Mass               | 0.97 | 9.4E-05 | 7.2E-03 | 13.2  6.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.5% of the faces,   7.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 6.1E-04 | 7.2E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 1.4E-03 | 1.2E-01 |  5.7  7.1E-02  OK|
 | O-TurbFreq           | 0.96 | 6.4E-04 | 4.0E-02 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   33                    CPU SECONDS = 3.164E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 5.0E-04 | 4.5E-02 |       3.0E-02  OK|
 | V-Mom                | 0.97 | 3.9E-04 | 3.2E-02 |       3.3E-02  OK|
 | W-Mom                | 0.97 | 5.2E-04 | 2.8E-02 |       3.9E-02  OK|
 | P-Mass               | 0.99 | 9.3E-05 | 6.8E-03 | 13.2  6.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.6% of the faces,   7.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 5.9E-04 | 5.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 1.4E-03 | 1.2E-01 |  5.7  7.1E-02  OK|
 | O-TurbFreq           | 0.98 | 6.3E-04 | 3.9E-02 | 11.6  5.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   34                    CPU SECONDS = 3.260E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.93 | 4.7E-04 | 4.0E-02 |       3.1E-02  OK|
 | V-Mom                | 0.98 | 3.8E-04 | 2.2E-02 |       3.3E-02  OK|
 | W-Mom                | 0.97 | 5.1E-04 | 3.0E-02 |       3.9E-02  OK|
 | P-Mass               | 0.99 | 9.2E-05 | 7.7E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.6% of the faces,   7.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 5.7E-04 | 8.8E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 1.5E-03 | 9.6E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 0.99 | 6.2E-04 | 4.3E-02 | 11.6  5.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   35                    CPU SECONDS = 3.352E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.92 | 4.3E-04 | 2.6E-02 |       3.3E-02  OK|
 | V-Mom                | 0.99 | 3.8E-04 | 3.9E-02 |       3.2E-02  OK|
 | W-Mom                | 0.96 | 4.9E-04 | 3.1E-02 |       4.0E-02  OK|
 | P-Mass               | 0.98 | 9.0E-05 | 8.6E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.7% of the faces,   7.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 5.6E-04 | 7.6E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 1.4E-03 | 9.6E-02 |  5.7  6.1E-02  OK|
 | O-TurbFreq           | 0.94 | 5.9E-04 | 4.9E-02 | 11.6  5.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   36                    CPU SECONDS = 3.443E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 4.2E-04 | 4.2E-02 |       3.4E-02  OK|
 | V-Mom                | 0.99 | 3.7E-04 | 4.5E-02 |       3.2E-02  OK|
 | W-Mom                | 0.95 | 4.6E-04 | 3.7E-02 |       4.0E-02  OK|
 | P-Mass               | 0.99 | 8.9E-05 | 9.3E-03 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.7% of the faces,   7.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 5.3E-04 | 7.1E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 1.4E-03 | 1.1E-01 |  5.7  6.2E-02  OK|
 | O-TurbFreq           | 0.91 | 5.4E-04 | 2.6E-02 | 11.6  6.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   37                    CPU SECONDS = 3.537E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 4.2E-04 | 4.7E-02 |       3.1E-02  OK|
 | V-Mom                | 0.97 | 3.6E-04 | 4.4E-02 |       3.2E-02  OK|
 | W-Mom                | 0.95 | 4.4E-04 | 3.9E-02 |       3.9E-02  OK|
 | P-Mass               | 0.99 | 8.7E-05 | 9.1E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.8% of the faces,   7.7% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 5.0E-04 | 9.1E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.92 | 1.3E-03 | 1.3E-01 |  5.7  6.9E-02  OK|
 | O-TurbFreq           | 0.93 | 5.0E-04 | 2.9E-02 | 11.6  6.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   38                    CPU SECONDS = 3.636E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 4.1E-04 | 4.1E-02 |       3.1E-02  OK|
 | V-Mom                | 0.94 | 3.4E-04 | 3.7E-02 |       3.0E-02  OK|
 | W-Mom                | 0.94 | 4.1E-04 | 4.1E-02 |       3.8E-02  OK|
 | P-Mass               | 0.99 | 8.6E-05 | 8.2E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.8% of the faces,   7.7% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 4.8E-04 | 1.3E-01 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.93 | 1.2E-03 | 1.3E-01 |  5.7  7.5E-02  OK|
 | O-TurbFreq           | 0.94 | 4.7E-04 | 3.2E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   39                    CPU SECONDS = 3.731E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.92 | 3.7E-04 | 3.0E-02 |       3.3E-02  OK|
 | V-Mom                | 0.92 | 3.1E-04 | 3.8E-02 |       3.1E-02  OK|
 | W-Mom                | 0.93 | 3.8E-04 | 2.8E-02 |       3.8E-02  OK|
 | P-Mass               | 0.97 | 8.3E-05 | 7.0E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.8% of the faces,   7.7% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.91 | 4.4E-04 | 1.1E-01 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 1.2E-03 | 6.8E-02 |  5.7  7.7E-02  OK|
 | O-TurbFreq           | 0.94 | 4.4E-04 | 2.8E-02 | 11.6  8.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   40                    CPU SECONDS = 3.818E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.91 | 3.4E-04 | 1.9E-02 |       3.3E-02  OK|
 | V-Mom                | 0.93 | 2.9E-04 | 3.3E-02 |       3.3E-02  OK|
 | W-Mom                | 0.96 | 3.7E-04 | 3.2E-02 |       3.9E-02  OK|
 | P-Mass               | 0.95 | 7.9E-05 | 6.8E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  10.9% of the faces,   7.8% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 4.1E-04 | 7.6E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 1.1E-03 | 7.6E-02 |  5.7  7.4E-02  OK|
 | O-TurbFreq           | 0.95 | 4.2E-04 | 2.2E-02 | 11.6  8.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   41                    CPU SECONDS = 3.913E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.94 | 3.2E-04 | 2.2E-02 |       3.3E-02  OK|
 | V-Mom                | 0.95 | 2.7E-04 | 3.0E-02 |       3.3E-02  OK|
 | W-Mom                | 0.98 | 3.6E-04 | 2.0E-02 |       4.0E-02  OK|
 | P-Mass               | 0.95 | 7.5E-05 | 1.1E-02 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.1% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 4.0E-04 | 3.6E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 1.2E-03 | 6.3E-02 |  5.7  6.9E-02  OK|
 | O-TurbFreq           | 0.98 | 4.1E-04 | 2.6E-02 | 11.6  7.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   42                    CPU SECONDS = 4.015E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 3.1E-04 | 2.6E-02 |       3.4E-02  OK|
 | V-Mom                | 0.97 | 2.7E-04 | 3.5E-02 |       3.5E-02  OK|
 | W-Mom                | 1.00 | 3.6E-04 | 4.1E-02 |       4.3E-02  OK|
 | P-Mass               | 0.96 | 7.2E-05 | 6.9E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.2% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.6% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 3.9E-04 | 4.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 1.2E-03 | 6.3E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 1.04 | 4.3E-04 | 3.3E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   43                    CPU SECONDS = 4.107E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 3.0E-04 | 2.6E-02 |       3.4E-02  OK|
 | V-Mom                | 0.98 | 2.6E-04 | 2.8E-02 |       3.8E-02  OK|
 | W-Mom                | 0.98 | 3.5E-04 | 2.9E-02 |       4.6E-02  OK|
 | P-Mass               | 0.96 | 7.0E-05 | 6.4E-03 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.3% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 3.9E-04 | 4.5E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 1.2E-03 | 7.3E-02 |  5.7  6.5E-02  OK|
 | O-TurbFreq           | 0.99 | 4.2E-04 | 2.7E-02 | 11.6  8.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   44                    CPU SECONDS = 4.206E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 2.9E-04 | 2.3E-02 |       3.2E-02  OK|
 | V-Mom                | 0.98 | 2.6E-04 | 1.8E-02 |       3.6E-02  OK|
 | W-Mom                | 0.97 | 3.4E-04 | 3.9E-02 |       4.3E-02  OK|
 | P-Mass               | 0.96 | 6.7E-05 | 7.9E-03 | 13.2  7.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.4% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 4.0E-04 | 5.4E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 1.1E-03 | 9.0E-02 |  5.7  6.7E-02  OK|
 | O-TurbFreq           | 0.92 | 3.9E-04 | 2.9E-02 | 11.6  1.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   45                    CPU SECONDS = 4.295E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 2.8E-04 | 1.8E-02 |       3.0E-02  OK|
 | V-Mom                | 0.99 | 2.5E-04 | 2.2E-02 |       3.3E-02  OK|
 | W-Mom                | 0.95 | 3.2E-04 | 3.9E-02 |       4.0E-02  OK|
 | P-Mass               | 0.96 | 6.5E-05 | 7.1E-03 | 13.2  7.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.4% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 3.8E-04 | 4.3E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.93 | 1.0E-03 | 8.6E-02 |  5.7  6.8E-02  OK|
 | O-TurbFreq           | 0.94 | 3.7E-04 | 3.8E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   46                    CPU SECONDS = 4.392E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.94 | 2.6E-04 | 1.6E-02 |       2.9E-02  OK|
 | V-Mom                | 1.00 | 2.5E-04 | 2.3E-02 |       3.2E-02  OK|
 | W-Mom                | 0.95 | 3.1E-04 | 1.9E-02 |       3.7E-02  OK|
 | P-Mass               | 0.96 | 6.2E-05 | 4.5E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 3.7E-04 | 4.0E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 9.9E-04 | 7.3E-02 |  5.7  6.5E-02  OK|
 | O-TurbFreq           | 0.97 | 3.6E-04 | 3.8E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   47                    CPU SECONDS = 4.488E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 2.5E-04 | 1.5E-02 |       2.8E-02  OK|
 | V-Mom                | 1.01 | 2.6E-04 | 2.9E-02 |       3.2E-02  OK|
 | W-Mom                | 0.97 | 3.0E-04 | 2.3E-02 |       3.8E-02  OK|
 | P-Mass               | 0.97 | 6.0E-05 | 4.0E-03 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 3.5E-04 | 4.7E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 9.6E-04 | 8.8E-02 |  5.7  6.0E-02  OK|
 | O-TurbFreq           | 0.99 | 3.5E-04 | 2.7E-02 | 11.6  1.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   48                    CPU SECONDS = 4.584E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 2.4E-04 | 1.4E-02 |       2.8E-02  OK|
 | V-Mom                | 1.00 | 2.6E-04 | 2.7E-02 |       3.4E-02  OK|
 | W-Mom                | 0.99 | 2.9E-04 | 2.4E-02 |       3.9E-02  OK|
 | P-Mass               | 0.97 | 5.8E-05 | 5.1E-03 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 3.4E-04 | 3.1E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 9.8E-04 | 9.2E-02 |  5.7  6.0E-02  OK|
 | O-TurbFreq           | 1.03 | 3.6E-04 | 3.1E-02 | 11.6  9.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   49                    CPU SECONDS = 4.680E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 2.3E-04 | 1.7E-02 |       2.8E-02  OK|
 | V-Mom                | 0.97 | 2.5E-04 | 2.4E-02 |       3.5E-02  OK|
 | W-Mom                | 1.00 | 2.9E-04 | 2.7E-02 |       4.0E-02  OK|
 | P-Mass               | 0.95 | 5.5E-05 | 3.6E-03 | 13.2  7.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 3.4E-04 | 3.4E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 1.0E-03 | 1.0E-01 |  5.7  6.2E-02  OK|
 | O-TurbFreq           | 1.03 | 3.7E-04 | 3.6E-02 | 11.6  8.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   50                    CPU SECONDS = 4.777E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 2.3E-04 | 1.7E-02 |       2.9E-02  OK|
 | V-Mom                | 1.01 | 2.5E-04 | 2.3E-02 |       3.5E-02  OK|
 | W-Mom                | 1.01 | 3.0E-04 | 2.8E-02 |       4.1E-02  OK|
 | P-Mass               | 0.94 | 5.2E-05 | 3.7E-03 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 3.4E-04 | 4.9E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 1.0E-03 | 9.5E-02 |  5.7  6.4E-02  OK|
 | O-TurbFreq           | 1.03 | 3.8E-04 | 4.6E-02 | 11.6  8.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   51                    CPU SECONDS = 4.864E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 2.3E-04 | 1.5E-02 |       2.9E-02  OK|
 | V-Mom                | 1.05 | 2.7E-04 | 2.4E-02 |       3.4E-02  OK|
 | W-Mom                | 1.01 | 3.0E-04 | 2.5E-02 |       4.3E-02  OK|
 | P-Mass               | 0.95 | 4.9E-05 | 3.7E-03 | 13.2  8.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 3.4E-04 | 3.7E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 9.7E-04 | 9.3E-02 |  5.7  6.4E-02  OK|
 | O-TurbFreq           | 1.07 | 4.1E-04 | 6.9E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   52                    CPU SECONDS = 4.957E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 2.3E-04 | 1.4E-02 |       2.9E-02  OK|
 | V-Mom                | 1.08 | 2.9E-04 | 2.8E-02 |       3.3E-02  OK|
 | W-Mom                | 1.01 | 3.0E-04 | 3.6E-02 |       4.6E-02  OK|
 | P-Mass               | 0.99 | 4.9E-05 | 5.5E-03 | 13.2  8.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.07 | 3.6E-04 | 8.9E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 9.6E-04 | 8.5E-02 |  5.7  6.5E-02  OK|
 | O-TurbFreq           | 1.04 | 4.3E-04 | 7.4E-02 | 11.6  7.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   53                    CPU SECONDS = 5.056E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 2.4E-04 | 1.1E-02 |       2.8E-02  OK|
 | V-Mom                | 1.09 | 3.1E-04 | 3.5E-02 |       3.4E-02  OK|
 | W-Mom                | 1.00 | 3.0E-04 | 3.5E-02 |       4.7E-02  OK|
 | P-Mass               | 1.02 | 5.0E-05 | 8.7E-03 | 13.2  8.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.09 | 3.9E-04 | 7.1E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 9.7E-04 | 7.9E-02 |  5.7  7.1E-02  OK|
 | O-TurbFreq           | 1.00 | 4.3E-04 | 6.4E-02 | 11.6  7.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   54                    CPU SECONDS = 5.150E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 2.4E-04 | 1.5E-02 |       2.8E-02  OK|
 | V-Mom                | 1.06 | 3.3E-04 | 4.1E-02 |       3.5E-02  OK|
 | W-Mom                | 1.00 | 3.0E-04 | 2.5E-02 |       4.5E-02  OK|
 | P-Mass               | 1.00 | 5.0E-05 | 3.8E-03 | 13.2  8.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 4.1E-04 | 6.1E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 9.7E-04 | 8.0E-02 |  5.7  8.0E-02  OK|
 | O-TurbFreq           | 1.00 | 4.3E-04 | 5.2E-02 | 11.6  7.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   55                    CPU SECONDS = 5.248E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 2.5E-04 | 1.8E-02 |       2.7E-02  OK|
 | V-Mom                | 1.02 | 3.4E-04 | 4.9E-02 |       3.3E-02  OK|
 | W-Mom                | 1.02 | 3.1E-04 | 2.6E-02 |       4.1E-02  OK|
 | P-Mass               | 1.02 | 5.1E-05 | 2.1E-02 | 13.2  7.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.07 | 4.4E-04 | 7.1E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 9.8E-04 | 6.5E-02 |  5.7  8.7E-02  OK|
 | O-TurbFreq           | 0.99 | 4.3E-04 | 4.4E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   56                    CPU SECONDS = 5.333E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 2.6E-04 | 1.9E-02 |       2.5E-02  OK|
 | V-Mom                | 0.99 | 3.3E-04 | 5.2E-02 |       2.9E-02  OK|
 | W-Mom                | 1.03 | 3.2E-04 | 3.6E-02 |       3.7E-02  OK|
 | P-Mass               | 0.96 | 4.9E-05 | 6.5E-03 | 13.2  7.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 4.5E-04 | 6.4E-02 |  5.7  7.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 1.0E-03 | 6.8E-02 |  5.7  8.6E-02  OK|
 | O-TurbFreq           | 0.99 | 4.2E-04 | 6.3E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   57                    CPU SECONDS = 5.421E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 2.5E-04 | 2.0E-02 |       2.4E-02  OK|
 | V-Mom                | 0.96 | 3.2E-04 | 4.5E-02 |       2.6E-02  OK|
 | W-Mom                | 1.02 | 3.2E-04 | 3.9E-02 |       3.4E-02  OK|
 | P-Mass               | 0.99 | 4.9E-05 | 4.9E-03 | 13.2  6.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 4.3E-04 | 6.2E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 1.0E-03 | 7.6E-02 |  5.7  7.8E-02  OK|
 | O-TurbFreq           | 0.99 | 4.2E-04 | 6.6E-02 | 11.6  7.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   58                    CPU SECONDS = 5.509E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 2.5E-04 | 2.0E-02 |       2.5E-02  OK|
 | V-Mom                | 0.96 | 3.1E-04 | 4.1E-02 |       2.5E-02  OK|
 | W-Mom                | 1.01 | 3.2E-04 | 4.1E-02 |       3.3E-02  OK|
 | P-Mass               | 1.03 | 5.0E-05 | 1.2E-02 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 4.2E-04 | 6.4E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 1.0E-03 | 9.5E-02 |  5.7  7.1E-02  OK|
 | O-TurbFreq           | 0.96 | 4.0E-04 | 6.3E-02 | 11.6  7.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   59                    CPU SECONDS = 5.599E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 2.4E-04 | 2.0E-02 |       2.7E-02  OK|
 | V-Mom                | 0.98 | 3.0E-04 | 3.7E-02 |       2.5E-02  OK|
 | W-Mom                | 1.00 | 3.2E-04 | 3.8E-02 |       3.3E-02  OK|
 | P-Mass               | 1.01 | 5.1E-05 | 1.1E-02 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 4.0E-04 | 6.0E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 9.8E-04 | 7.9E-02 |  5.7  6.5E-02  OK|
 | O-TurbFreq           | 0.98 | 3.9E-04 | 5.4E-02 | 11.6  8.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   60                    CPU SECONDS = 5.688E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 2.3E-04 | 2.0E-02 |       2.8E-02  OK|
 | V-Mom                | 0.98 | 3.0E-04 | 2.9E-02 |       2.6E-02  OK|
 | W-Mom                | 0.97 | 3.1E-04 | 3.3E-02 |       3.3E-02  OK|
 | P-Mass               | 1.01 | 5.1E-05 | 1.0E-02 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 3.8E-04 | 5.9E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 9.5E-04 | 7.0E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 1.00 | 3.9E-04 | 4.9E-02 | 11.6  1.2E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   61                    CPU SECONDS = 5.798E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 2.3E-04 | 1.9E-02 |       2.9E-02  OK|
 | V-Mom                | 1.03 | 3.1E-04 | 2.9E-02 |       2.5E-02  OK|
 | W-Mom                | 0.98 | 3.1E-04 | 2.7E-02 |       3.4E-02  OK|
 | P-Mass               | 1.02 | 5.2E-05 | 1.0E-02 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 3.7E-04 | 5.4E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.94 | 8.9E-04 | 6.2E-02 |  5.7  5.8E-02  OK|
 | O-TurbFreq           | 0.97 | 3.8E-04 | 4.3E-02 | 11.6  1.4E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   62                    CPU SECONDS = 5.893E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 2.4E-04 | 1.8E-02 |       3.0E-02  OK|
 | V-Mom                | 1.06 | 3.3E-04 | 3.3E-02 |       2.4E-02  OK|
 | W-Mom                | 0.99 | 3.0E-04 | 3.1E-02 |       3.4E-02  OK|
 | P-Mass               | 0.99 | 5.2E-05 | 4.3E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 3.9E-04 | 7.0E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 8.5E-04 | 8.4E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.95 | 3.6E-04 | 4.0E-02 | 11.6  1.3E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   63                    CPU SECONDS = 6.003E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 2.5E-04 | 1.9E-02 |       2.9E-02  OK|
 | V-Mom                | 1.03 | 3.3E-04 | 3.2E-02 |       2.4E-02  OK|
 | W-Mom                | 1.00 | 3.0E-04 | 3.3E-02 |       3.1E-02  OK|
 | P-Mass               | 1.02 | 5.2E-05 | 1.8E-02 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.05 | 4.1E-04 | 9.4E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 8.2E-04 | 6.7E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.98 | 3.6E-04 | 3.8E-02 | 11.6  1.4E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   64                    CPU SECONDS = 6.098E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 2.5E-04 | 1.7E-02 |       2.7E-02  OK|
 | V-Mom                | 0.98 | 3.3E-04 | 3.1E-02 |       2.4E-02  OK|
 | W-Mom                | 0.98 | 3.0E-04 | 3.1E-02 |       3.0E-02  OK|
 | P-Mass               | 0.97 | 5.1E-05 | 1.1E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 3.7E-04 | 6.0E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 8.0E-04 | 6.5E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.98 | 3.5E-04 | 3.8E-02 | 11.6  1.2E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   65                    CPU SECONDS = 6.181E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 2.4E-04 | 1.7E-02 |       2.5E-02  OK|
 | V-Mom                | 0.96 | 3.2E-04 | 3.1E-02 |       2.5E-02  OK|
 | W-Mom                | 0.97 | 2.9E-04 | 2.9E-02 |       3.1E-02  OK|
 | P-Mass               | 0.97 | 4.9E-05 | 2.2E-02 | 13.2  5.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.91 | 3.4E-04 | 4.8E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 7.8E-04 | 5.5E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.94 | 3.3E-04 | 3.7E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   66                    CPU SECONDS = 6.275E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 2.4E-04 | 1.7E-02 |       2.4E-02  OK|
 | V-Mom                | 0.95 | 3.0E-04 | 3.3E-02 |       2.5E-02  OK|
 | W-Mom                | 0.98 | 2.9E-04 | 2.3E-02 |       3.2E-02  OK|
 | P-Mass               | 0.97 | 4.8E-05 | 1.3E-02 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 3.2E-04 | 5.4E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 7.7E-04 | 5.1E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.94 | 3.1E-04 | 3.6E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   67                    CPU SECONDS = 6.369E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 2.3E-04 | 1.8E-02 |       2.4E-02  OK|
 | V-Mom                | 0.94 | 2.8E-04 | 3.0E-02 |       2.5E-02  OK|
 | W-Mom                | 0.97 | 2.8E-04 | 3.1E-02 |       3.2E-02  OK|
 | P-Mass               | 0.96 | 4.6E-05 | 2.1E-02 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 3.2E-04 | 4.6E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 7.8E-04 | 4.3E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.96 | 2.9E-04 | 3.4E-02 | 11.6  1.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   68                    CPU SECONDS = 6.459E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 2.2E-04 | 1.7E-02 |       2.4E-02  OK|
 | V-Mom                | 0.94 | 2.6E-04 | 2.9E-02 |       2.4E-02  OK|
 | W-Mom                | 0.96 | 2.7E-04 | 2.9E-02 |       3.1E-02  OK|
 | P-Mass               | 0.92 | 4.2E-05 | 1.1E-02 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 3.2E-04 | 5.0E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 7.9E-04 | 4.6E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.98 | 2.9E-04 | 3.3E-02 | 11.6  1.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   69                    CPU SECONDS = 6.556E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 2.1E-04 | 1.7E-02 |       2.4E-02  OK|
 | V-Mom                | 0.95 | 2.5E-04 | 2.5E-02 |       2.3E-02  OK|
 | W-Mom                | 0.96 | 2.5E-04 | 2.1E-02 |       3.0E-02  OK|
 | P-Mass               | 0.95 | 4.0E-05 | 3.6E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 3.2E-04 | 4.9E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 7.9E-04 | 4.4E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.98 | 2.8E-04 | 3.1E-02 | 11.6  9.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   70                    CPU SECONDS = 6.653E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 2.0E-04 | 1.6E-02 |       2.4E-02  OK|
 | V-Mom                | 0.96 | 2.4E-04 | 2.3E-02 |       2.2E-02  OK|
 | W-Mom                | 0.96 | 2.4E-04 | 2.2E-02 |       2.9E-02  OK|
 | P-Mass               | 1.00 | 4.0E-05 | 1.1E-02 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 3.1E-04 | 5.0E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 7.7E-04 | 4.3E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.98 | 2.7E-04 | 4.2E-02 | 11.6  8.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   71                    CPU SECONDS = 6.747E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 2.0E-04 | 1.4E-02 |       2.4E-02  OK|
 | V-Mom                | 0.98 | 2.4E-04 | 2.4E-02 |       2.1E-02  OK|
 | W-Mom                | 0.96 | 2.3E-04 | 2.6E-02 |       2.8E-02  OK|
 | P-Mass               | 1.00 | 4.0E-05 | 5.1E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.9% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 3.0E-04 | 4.4E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 7.5E-04 | 4.5E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.96 | 2.6E-04 | 4.4E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   72                    CPU SECONDS = 6.849E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 2.0E-04 | 1.3E-02 |       2.4E-02  OK|
 | V-Mom                | 0.99 | 2.3E-04 | 2.8E-02 |       2.1E-02  OK|
 | W-Mom                | 0.97 | 2.3E-04 | 2.8E-02 |       2.8E-02  OK|
 | P-Mass               | 1.01 | 4.0E-05 | 4.8E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.9% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 2.9E-04 | 4.4E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 7.3E-04 | 4.1E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.96 | 2.5E-04 | 4.1E-02 | 11.6  7.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   73                    CPU SECONDS = 6.943E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.9E-04 | 1.2E-02 |       2.5E-02  OK|
 | V-Mom                | 1.00 | 2.3E-04 | 3.6E-02 |       2.2E-02  OK|
 | W-Mom                | 0.98 | 2.2E-04 | 2.9E-02 |       2.7E-02  OK|
 | P-Mass               | 1.01 | 4.1E-05 | 7.9E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.9% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 2.9E-04 | 4.2E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 7.2E-04 | 4.6E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.98 | 2.5E-04 | 4.1E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   74                    CPU SECONDS = 7.032E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.9E-04 | 1.2E-02 |       2.5E-02  OK|
 | V-Mom                | 0.98 | 2.3E-04 | 3.6E-02 |       2.2E-02  OK|
 | W-Mom                | 0.98 | 2.2E-04 | 3.0E-02 |       2.7E-02  OK|
 | P-Mass               | 1.00 | 4.1E-05 | 9.3E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 3.0E-04 | 4.3E-02 |  5.7  7.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 7.0E-04 | 4.0E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.98 | 2.4E-04 | 3.7E-02 | 11.6  7.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   75                    CPU SECONDS = 7.122E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.8E-04 | 1.1E-02 |       2.5E-02  OK|
 | V-Mom                | 0.96 | 2.2E-04 | 3.3E-02 |       2.2E-02  OK|
 | W-Mom                | 0.97 | 2.1E-04 | 2.6E-02 |       2.7E-02  OK|
 | P-Mass               | 0.99 | 4.0E-05 | 9.4E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 3.0E-04 | 4.0E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 6.9E-04 | 4.2E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.97 | 2.3E-04 | 3.4E-02 | 11.6  7.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   76                    CPU SECONDS = 7.216E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.7E-04 | 1.1E-02 |       2.6E-02  OK|
 | V-Mom                | 0.94 | 2.1E-04 | 2.8E-02 |       2.2E-02  OK|
 | W-Mom                | 0.95 | 2.0E-04 | 2.4E-02 |       2.7E-02  OK|
 | P-Mass               | 0.96 | 3.9E-05 | 4.1E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 2.9E-04 | 4.4E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 6.7E-04 | 4.2E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.96 | 2.3E-04 | 3.3E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   77                    CPU SECONDS = 7.305E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.7E-04 | 1.2E-02 |       2.6E-02  OK|
 | V-Mom                | 0.94 | 2.0E-04 | 1.6E-02 |       2.2E-02  OK|
 | W-Mom                | 0.95 | 1.9E-04 | 1.5E-02 |       2.8E-02  OK|
 | P-Mass               | 0.98 | 3.8E-05 | 1.3E-02 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 2.8E-04 | 4.7E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 6.7E-04 | 4.7E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.98 | 2.2E-04 | 3.0E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   78                    CPU SECONDS = 7.391E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.6E-04 | 1.2E-02 |       2.5E-02  OK|
 | V-Mom                | 0.96 | 1.9E-04 | 1.5E-02 |       2.1E-02  OK|
 | W-Mom                | 0.96 | 1.8E-04 | 4.0E-02 |       2.8E-02  OK|
 | P-Mass               | 0.97 | 3.7E-05 | 7.6E-03 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 2.7E-04 | 5.7E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 6.6E-04 | 4.6E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 0.99 | 2.2E-04 | 2.6E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   79                    CPU SECONDS = 7.482E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.5E-04 | 1.2E-02 |       2.5E-02  OK|
 | V-Mom                | 0.98 | 1.8E-04 | 2.1E-02 |       2.1E-02  OK|
 | W-Mom                | 0.98 | 1.8E-04 | 2.3E-02 |       2.8E-02  OK|
 | P-Mass               | 0.98 | 3.6E-05 | 4.6E-03 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 2.6E-04 | 6.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 6.7E-04 | 4.8E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 1.00 | 2.2E-04 | 2.7E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   80                    CPU SECONDS = 7.570E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.5E-04 | 1.2E-02 |       2.5E-02  OK|
 | V-Mom                | 0.99 | 1.8E-04 | 2.2E-02 |       2.2E-02  OK|
 | W-Mom                | 1.00 | 1.8E-04 | 3.7E-02 |       2.8E-02  OK|
 | P-Mass               | 1.00 | 3.6E-05 | 1.2E-02 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  12.0% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 2.6E-04 | 5.6E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 6.5E-04 | 4.5E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.98 | 2.1E-04 | 2.7E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   81                    CPU SECONDS = 7.662E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.5E-04 | 1.2E-02 |       2.6E-02  OK|
 | V-Mom                | 1.00 | 1.8E-04 | 2.3E-02 |       2.3E-02  OK|
 | W-Mom                | 0.99 | 1.8E-04 | 3.1E-02 |       2.8E-02  OK|
 | P-Mass               | 0.96 | 3.5E-05 | 7.8E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.9% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 2.7E-04 | 5.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 6.3E-04 | 5.3E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.96 | 2.1E-04 | 2.7E-02 | 11.6  7.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   82                    CPU SECONDS = 7.750E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.5E-04 | 1.2E-02 |       2.6E-02  OK|
 | V-Mom                | 1.01 | 1.8E-04 | 2.9E-02 |       2.3E-02  OK|
 | W-Mom                | 0.99 | 1.8E-04 | 3.4E-02 |       2.9E-02  OK|
 | P-Mass               | 0.97 | 3.4E-05 | 4.4E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 2.7E-04 | 4.1E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 6.1E-04 | 6.1E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.98 | 2.0E-04 | 2.6E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   83                    CPU SECONDS = 7.844E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.5E-04 | 1.1E-02 |       2.5E-02  OK|
 | V-Mom                | 1.01 | 1.9E-04 | 3.1E-02 |       2.4E-02  OK|
 | W-Mom                | 0.99 | 1.7E-04 | 4.0E-02 |       3.0E-02  OK|
 | P-Mass               | 0.98 | 3.3E-05 | 6.9E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 2.7E-04 | 4.0E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 6.0E-04 | 5.1E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 1.01 | 2.0E-04 | 2.6E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   84                    CPU SECONDS = 7.930E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.5E-04 | 1.3E-02 |       2.5E-02  OK|
 | V-Mom                | 1.02 | 1.9E-04 | 3.0E-02 |       2.4E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 3.6E-02 |       3.1E-02  OK|
 | P-Mass               | 0.97 | 3.2E-05 | 7.0E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 2.7E-04 | 3.4E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.8E-04 | 4.0E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 1.03 | 2.1E-04 | 2.4E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   85                    CPU SECONDS = 8.018E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.6E-04 | 1.3E-02 |       2.5E-02  OK|
 | V-Mom                | 1.01 | 1.9E-04 | 3.5E-02 |       2.5E-02  OK|
 | W-Mom                | 0.99 | 1.7E-04 | 3.0E-02 |       3.2E-02  OK|
 | P-Mass               | 0.98 | 3.1E-05 | 3.6E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 2.6E-04 | 2.7E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.8E-04 | 7.0E-02 |  5.7  5.9E-02  OK|
 | O-TurbFreq           | 1.01 | 2.1E-04 | 2.1E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   86                    CPU SECONDS = 8.105E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.6E-04 | 1.6E-02 |       2.5E-02  OK|
 | V-Mom                | 1.01 | 1.9E-04 | 3.4E-02 |       2.5E-02  OK|
 | W-Mom                | 1.01 | 1.7E-04 | 3.9E-02 |       3.3E-02  OK|
 | P-Mass               | 1.02 | 3.2E-05 | 6.5E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 2.6E-04 | 2.4E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.8E-04 | 8.0E-02 |  5.7  5.9E-02  OK|
 | O-TurbFreq           | 1.00 | 2.1E-04 | 2.0E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   87                    CPU SECONDS = 8.195E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.6E-04 | 1.8E-02 |       2.4E-02  OK|
 | V-Mom                | 1.00 | 1.9E-04 | 2.7E-02 |       2.5E-02  OK|
 | W-Mom                | 1.00 | 1.7E-04 | 2.5E-02 |       3.4E-02  OK|
 | P-Mass               | 1.01 | 3.2E-05 | 6.6E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 2.6E-04 | 2.7E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.7E-04 | 4.4E-02 |  5.7  6.1E-02  OK|
 | O-TurbFreq           | 1.00 | 2.1E-04 | 2.1E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   88                    CPU SECONDS = 8.295E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.7E-04 | 1.8E-02 |       2.4E-02  OK|
 | V-Mom                | 0.99 | 1.9E-04 | 2.6E-02 |       2.5E-02  OK|
 | W-Mom                | 1.01 | 1.7E-04 | 3.9E-02 |       3.4E-02  OK|
 | P-Mass               | 1.01 | 3.2E-05 | 6.8E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 2.6E-04 | 3.2E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.7E-04 | 3.8E-02 |  5.7  6.1E-02  OK|
 | O-TurbFreq           | 0.99 | 2.1E-04 | 2.0E-02 | 11.6  7.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   89                    CPU SECONDS = 8.382E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.6E-04 | 1.8E-02 |       2.4E-02  OK|
 | V-Mom                | 0.99 | 1.9E-04 | 2.4E-02 |       2.5E-02  OK|
 | W-Mom                | 1.00 | 1.7E-04 | 4.1E-02 |       3.3E-02  OK|
 | P-Mass               | 1.01 | 3.3E-05 | 7.9E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 2.7E-04 | 3.1E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.6E-04 | 3.9E-02 |  5.7  6.0E-02  OK|
 | O-TurbFreq           | 0.98 | 2.0E-04 | 1.8E-02 | 11.6  7.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   90                    CPU SECONDS = 8.472E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.6E-04 | 1.9E-02 |       2.6E-02  OK|
 | V-Mom                | 0.98 | 1.9E-04 | 2.1E-02 |       2.4E-02  OK|
 | W-Mom                | 1.00 | 1.7E-04 | 4.0E-02 |       3.2E-02  OK|
 | P-Mass               | 1.03 | 3.3E-05 | 1.3E-02 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 2.8E-04 | 2.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.5E-04 | 5.0E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.97 | 2.0E-04 | 1.6E-02 | 11.6  7.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   91                    CPU SECONDS = 8.564E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.6E-04 | 1.8E-02 |       2.7E-02  OK|
 | V-Mom                | 0.99 | 1.8E-04 | 2.3E-02 |       2.4E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 2.1E-02 |       3.1E-02  OK|
 | P-Mass               | 0.96 | 3.2E-05 | 4.5E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 2.8E-04 | 2.9E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.5E-04 | 8.8E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.96 | 1.9E-04 | 1.4E-02 | 11.6  7.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   92                    CPU SECONDS = 8.662E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.5E-04 | 1.6E-02 |       2.7E-02  OK|
 | V-Mom                | 0.97 | 1.8E-04 | 2.7E-02 |       2.4E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 3.9E-02 |       3.1E-02  OK|
 | P-Mass               | 1.00 | 3.2E-05 | 8.9E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 2.8E-04 | 3.7E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.4E-04 | 8.9E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.98 | 1.8E-04 | 1.3E-02 | 11.6  8.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   93                    CPU SECONDS = 8.768E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 1.4E-04 | 1.2E-02 |       2.7E-02  OK|
 | V-Mom                | 0.98 | 1.7E-04 | 3.7E-02 |       2.4E-02  OK|
 | W-Mom                | 0.97 | 1.6E-04 | 2.9E-02 |       3.1E-02  OK|
 | P-Mass               | 0.94 | 3.0E-05 | 4.3E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 2.7E-04 | 3.4E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.4E-04 | 5.6E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 1.00 | 1.8E-04 | 2.0E-02 | 11.6  8.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   94                    CPU SECONDS = 8.869E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 1.4E-04 | 1.0E-02 |       2.8E-02  OK|
 | V-Mom                | 0.97 | 1.7E-04 | 4.3E-02 |       2.5E-02  OK|
 | W-Mom                | 0.98 | 1.6E-04 | 3.3E-02 |       3.1E-02  OK|
 | P-Mass               | 0.95 | 2.8E-05 | 4.1E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 2.6E-04 | 4.7E-02 |  5.7  7.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.4E-04 | 3.9E-02 |  5.7  6.0E-02  OK|
 | O-TurbFreq           | 0.99 | 1.8E-04 | 2.5E-02 | 11.6  8.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   95                    CPU SECONDS = 8.966E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.3E-04 | 9.4E-03 |       2.8E-02  OK|
 | V-Mom                | 0.97 | 1.6E-04 | 3.8E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.5E-04 | 3.4E-02 |       3.2E-02  OK|
 | P-Mass               | 0.95 | 2.7E-05 | 7.9E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 2.4E-04 | 3.5E-02 |  5.7  7.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.3E-04 | 5.8E-02 |  5.7  6.2E-02  OK|
 | O-TurbFreq           | 0.97 | 1.8E-04 | 2.2E-02 | 11.6  8.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   96                    CPU SECONDS = 9.058E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.3E-04 | 8.8E-03 |       2.7E-02  OK|
 | V-Mom                | 0.97 | 1.6E-04 | 3.0E-02 |       2.8E-02  OK|
 | W-Mom                | 0.97 | 1.5E-04 | 2.7E-02 |       3.3E-02  OK|
 | P-Mass               | 0.92 | 2.5E-05 | 3.9E-03 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 2.3E-04 | 3.7E-02 |  5.7  7.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.2E-04 | 1.1E-01 |  5.7  6.1E-02  OK|
 | O-TurbFreq           | 0.99 | 1.7E-04 | 2.1E-02 | 11.6  8.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   97                    CPU SECONDS = 9.149E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.2E-04 | 8.0E-03 |       2.7E-02  OK|
 | V-Mom                | 0.99 | 1.6E-04 | 2.5E-02 |       2.8E-02  OK|
 | W-Mom                | 0.99 | 1.5E-04 | 2.2E-02 |       3.5E-02  OK|
 | P-Mass               | 0.97 | 2.4E-05 | 3.0E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 2.2E-04 | 2.6E-02 |  5.7  7.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 5.1E-04 | 7.5E-02 |  5.7  5.8E-02  OK|
 | O-TurbFreq           | 1.00 | 1.7E-04 | 1.8E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   98                    CPU SECONDS = 9.234E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 9.2E-03 |       2.7E-02  OK|
 | V-Mom                | 0.95 | 1.5E-04 | 2.2E-02 |       2.8E-02  OK|
 | W-Mom                | 0.98 | 1.5E-04 | 2.0E-02 |       3.6E-02  OK|
 | P-Mass               | 1.01 | 2.5E-05 | 7.7E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 2.2E-04 | 2.5E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.0E-04 | 3.9E-02 |  5.7  5.8E-02  OK|
 | O-TurbFreq           | 0.99 | 1.7E-04 | 1.2E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =   99                    CPU SECONDS = 9.331E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.2E-04 | 8.1E-03 |       2.8E-02  OK|
 | V-Mom                | 0.96 | 1.5E-04 | 2.7E-02 |       2.8E-02  OK|
 | W-Mom                | 0.98 | 1.4E-04 | 2.4E-02 |       3.7E-02  OK|
 | P-Mass               | 0.99 | 2.4E-05 | 2.9E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 2.1E-04 | 2.5E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.9E-04 | 3.9E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 0.97 | 1.7E-04 | 1.4E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  100                    CPU SECONDS = 9.421E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.1E-04 | 7.4E-03 |       2.9E-02  OK|
 | V-Mom                | 0.98 | 1.4E-04 | 2.8E-02 |       2.8E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 2.7E-02 |       3.6E-02  OK|
 | P-Mass               | 0.98 | 2.4E-05 | 2.7E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 2.1E-04 | 2.6E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.9E-04 | 5.4E-02 |  5.7  6.7E-02  OK|
 | O-TurbFreq           | 0.95 | 1.6E-04 | 1.4E-02 | 11.6  8.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  101                    CPU SECONDS = 9.514E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 6.8E-03 |       2.9E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 3.0E-02 |       2.8E-02  OK|
 | W-Mom                | 0.97 | 1.4E-04 | 2.4E-02 |       3.5E-02  OK|
 | P-Mass               | 0.96 | 2.3E-05 | 2.9E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 2.0E-04 | 2.1E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.8E-04 | 8.1E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 0.95 | 1.5E-04 | 1.7E-02 | 11.6  8.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  102                    CPU SECONDS = 9.616E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 5.9E-03 |       2.8E-02  OK|
 | V-Mom                | 0.98 | 1.4E-04 | 3.0E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.3E-04 | 3.6E-02 |       3.4E-02  OK|
 | P-Mass               | 1.02 | 2.3E-05 | 1.0E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 2.0E-04 | 2.6E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 4.7E-04 | 7.1E-02 |  5.7  5.8E-02  OK|
 | O-TurbFreq           | 0.97 | 1.5E-04 | 1.7E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  103                    CPU SECONDS = 9.711E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 6.1E-03 |       2.7E-02  OK|
 | V-Mom                | 0.96 | 1.3E-04 | 2.1E-02 |       2.7E-02  OK|
 | W-Mom                | 0.95 | 1.3E-04 | 1.7E-02 |       3.2E-02  OK|
 | P-Mass               | 0.92 | 2.2E-05 | 3.3E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 1.9E-04 | 1.9E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 4.5E-04 | 4.3E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.97 | 1.4E-04 | 1.2E-02 | 11.6  7.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  104                    CPU SECONDS = 9.802E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.0E-04 | 7.2E-03 |       2.7E-02  OK|
 | V-Mom                | 0.96 | 1.3E-04 | 1.9E-02 |       2.8E-02  OK|
 | W-Mom                | 0.96 | 1.2E-04 | 2.0E-02 |       3.3E-02  OK|
 | P-Mass               | 0.98 | 2.1E-05 | 2.4E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.92 | 1.7E-04 | 2.2E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 4.4E-04 | 5.1E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.97 | 1.4E-04 | 2.4E-02 | 11.6  6.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  105                    CPU SECONDS = 9.910E+04
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 9.9E-05 | 6.8E-03 |       2.8E-02  OK|
 | V-Mom                | 0.96 | 1.2E-04 | 2.1E-02 |       2.9E-02  OK|
 | W-Mom                | 0.97 | 1.2E-04 | 3.9E-02 |       3.4E-02  OK|
 | P-Mass               | 1.00 | 2.1E-05 | 6.2E-03 | 13.2  5.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.6E-04 | 1.9E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.3E-04 | 8.7E-02 |  5.7  6.2E-02  OK|
 | O-TurbFreq           | 0.98 | 1.4E-04 | 1.4E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  106                    CPU SECONDS = 1.000E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 9.6E-05 | 6.6E-03 |       2.8E-02  OK|
 | V-Mom                | 0.96 | 1.2E-04 | 2.0E-02 |       2.9E-02  OK|
 | W-Mom                | 0.95 | 1.1E-04 | 1.6E-02 |       3.4E-02  OK|
 | P-Mass               | 0.97 | 2.1E-05 | 3.0E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.7E-04 | 1.9E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.2E-04 | 1.0E-01 |  5.7  6.5E-02  OK|
 | O-TurbFreq           | 1.01 | 1.4E-04 | 1.4E-02 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  107                    CPU SECONDS = 1.009E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 9.4E-05 | 7.1E-03 |       2.8E-02  OK|
 | V-Mom                | 0.97 | 1.1E-04 | 1.9E-02 |       2.8E-02  OK|
 | W-Mom                | 0.97 | 1.1E-04 | 1.6E-02 |       3.3E-02  OK|
 | P-Mass               | 0.97 | 2.0E-05 | 2.0E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.6E-04 | 1.8E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.2E-04 | 6.8E-02 |  5.7  6.4E-02  OK|
 | O-TurbFreq           | 1.01 | 1.4E-04 | 1.3E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  108                    CPU SECONDS = 1.018E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 9.4E-05 | 6.6E-03 |       2.8E-02  OK|
 | V-Mom                | 0.98 | 1.1E-04 | 1.8E-02 |       2.8E-02  OK|
 | W-Mom                | 0.99 | 1.1E-04 | 1.4E-02 |       3.2E-02  OK|
 | P-Mass               | 0.96 | 1.9E-05 | 2.1E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.6E-04 | 1.4E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.2E-04 | 5.0E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 0.98 | 1.4E-04 | 1.2E-02 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  109                    CPU SECONDS = 1.027E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 9.5E-05 | 7.1E-03 |       2.8E-02  OK|
 | V-Mom                | 1.00 | 1.1E-04 | 1.6E-02 |       2.8E-02  OK|
 | W-Mom                | 1.01 | 1.1E-04 | 1.3E-02 |       3.1E-02  OK|
 | P-Mass               | 0.98 | 1.9E-05 | 2.1E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.5E-04 | 1.2E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.3E-04 | 4.7E-02 |  5.7  5.8E-02  OK|
 | O-TurbFreq           | 0.98 | 1.3E-04 | 9.9E-03 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  110                    CPU SECONDS = 1.036E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 9.7E-05 | 6.9E-03 |       2.7E-02  OK|
 | V-Mom                | 1.01 | 1.1E-04 | 1.4E-02 |       2.8E-02  OK|
 | W-Mom                | 1.01 | 1.1E-04 | 1.6E-02 |       3.0E-02  OK|
 | P-Mass               | 1.00 | 1.9E-05 | 2.1E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.5E-04 | 1.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.2E-04 | 4.2E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.99 | 1.3E-04 | 9.7E-03 | 11.6  6.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  111                    CPU SECONDS = 1.045E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 9.9E-05 | 7.0E-03 |       2.7E-02  OK|
 | V-Mom                | 1.01 | 1.1E-04 | 1.4E-02 |       2.8E-02  OK|
 | W-Mom                | 1.00 | 1.1E-04 | 2.0E-02 |       2.9E-02  OK|
 | P-Mass               | 1.02 | 1.9E-05 | 2.6E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.4E-04 | 1.5E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.1E-04 | 6.2E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.99 | 1.3E-04 | 1.3E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  112                    CPU SECONDS = 1.054E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.0E-04 | 8.5E-03 |       2.7E-02  OK|
 | V-Mom                | 1.02 | 1.2E-04 | 1.6E-02 |       2.9E-02  OK|
 | W-Mom                | 0.99 | 1.1E-04 | 2.3E-02 |       2.9E-02  OK|
 | P-Mass               | 1.01 | 1.9E-05 | 2.7E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.4E-04 | 1.5E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.0E-04 | 6.3E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.99 | 1.3E-04 | 2.1E-02 | 11.6  6.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  113                    CPU SECONDS = 1.062E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.0E-04 | 8.9E-03 |       2.7E-02  OK|
 | V-Mom                | 1.03 | 1.2E-04 | 2.5E-02 |       2.9E-02  OK|
 | W-Mom                | 1.01 | 1.1E-04 | 3.1E-02 |       3.1E-02  OK|
 | P-Mass               | 1.01 | 1.9E-05 | 4.8E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.4E-04 | 1.8E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.0E-04 | 4.0E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.99 | 1.3E-04 | 2.2E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  114                    CPU SECONDS = 1.071E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 8.3E-03 |       2.8E-02  OK|
 | V-Mom                | 1.04 | 1.2E-04 | 3.5E-02 |       3.0E-02  OK|
 | W-Mom                | 1.01 | 1.1E-04 | 2.7E-02 |       3.2E-02  OK|
 | P-Mass               | 0.98 | 1.9E-05 | 2.7E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.4E-04 | 1.9E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 3.9E-04 | 3.9E-02 |  5.7  5.9E-02  OK|
 | O-TurbFreq           | 1.00 | 1.3E-04 | 1.7E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  115                    CPU SECONDS = 1.080E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.1E-04 | 7.4E-03 |       2.8E-02  OK|
 | V-Mom                | 1.03 | 1.3E-04 | 4.1E-02 |       3.1E-02  OK|
 | W-Mom                | 1.01 | 1.1E-04 | 3.1E-02 |       3.1E-02  OK|
 | P-Mass               | 0.97 | 1.8E-05 | 2.8E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.5E-04 | 1.8E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 3.9E-04 | 5.7E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 1.01 | 1.3E-04 | 1.1E-02 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  116                    CPU SECONDS = 1.089E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 8.1E-03 |       2.9E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 3.6E-02 |       3.1E-02  OK|
 | W-Mom                | 1.02 | 1.2E-04 | 3.0E-02 |       3.1E-02  OK|
 | P-Mass               | 0.98 | 1.8E-05 | 2.8E-03 | 13.2  6.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.5E-04 | 2.1E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.0E-04 | 4.2E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.05 | 1.3E-04 | 1.6E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  117                    CPU SECONDS = 1.098E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.2E-04 | 8.6E-03 |       3.0E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 2.8E-02 |       3.1E-02  OK|
 | W-Mom                | 1.03 | 1.2E-04 | 2.4E-02 |       3.1E-02  OK|
 | P-Mass               | 1.00 | 1.8E-05 | 3.4E-03 | 13.2  6.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.6E-04 | 3.0E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.0E-04 | 4.5E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 1.08 | 1.4E-04 | 2.5E-02 | 11.6  5.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  118                    CPU SECONDS = 1.107E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.2E-04 | 9.9E-03 |       3.0E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 2.9E-02 |       3.1E-02  OK|
 | W-Mom                | 1.05 | 1.3E-04 | 2.6E-02 |       3.2E-02  OK|
 | P-Mass               | 1.01 | 1.8E-05 | 4.2E-03 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.6E-04 | 2.7E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.0E-04 | 3.4E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.06 | 1.5E-04 | 2.5E-02 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  119                    CPU SECONDS = 1.116E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.2E-04 | 1.1E-02 |       3.1E-02  OK|
 | V-Mom                | 1.03 | 1.3E-04 | 2.3E-02 |       3.1E-02  OK|
 | W-Mom                | 1.08 | 1.4E-04 | 2.2E-02 |       3.1E-02  OK|
 | P-Mass               | 1.07 | 2.0E-05 | 1.0E-02 | 13.2  6.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.06 | 1.7E-04 | 3.9E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 4.1E-04 | 3.7E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.05 | 1.6E-04 | 2.2E-02 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  120                    CPU SECONDS = 1.125E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.3E-04 | 1.1E-02 |       3.2E-02  OK|
 | V-Mom                | 1.03 | 1.4E-04 | 2.5E-02 |       3.1E-02  OK|
 | W-Mom                | 1.09 | 1.5E-04 | 2.4E-02 |       3.0E-02  OK|
 | P-Mass               | 0.94 | 1.9E-05 | 4.0E-03 | 13.2  7.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.08 | 1.9E-04 | 4.6E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.1E-04 | 4.2E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.06 | 1.7E-04 | 1.9E-02 | 11.6  5.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  121                    CPU SECONDS = 1.134E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.3E-04 | 1.3E-02 |       3.2E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 2.3E-02 |       3.1E-02  OK|
 | W-Mom                | 1.10 | 1.6E-04 | 1.8E-02 |       2.9E-02  OK|
 | P-Mass               | 1.01 | 1.9E-05 | 2.2E-03 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.05 | 1.9E-04 | 2.8E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.1E-04 | 4.3E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.06 | 1.8E-04 | 1.6E-02 | 11.6  5.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  122                    CPU SECONDS = 1.142E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.4E-04 | 1.1E-02 |       3.2E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 1.8E-02 |       3.0E-02  OK|
 | W-Mom                | 1.09 | 1.8E-04 | 1.2E-02 |       2.8E-02  OK|
 | P-Mass               | 1.05 | 2.0E-05 | 1.8E-03 | 13.2  6.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 2.0E-04 | 2.8E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.1E-04 | 4.2E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.05 | 1.9E-04 | 2.0E-02 | 11.6  5.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  123                    CPU SECONDS = 1.152E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.4E-04 | 1.1E-02 |       3.1E-02  OK|
 | V-Mom                | 1.02 | 1.4E-04 | 1.7E-02 |       2.9E-02  OK|
 | W-Mom                | 1.07 | 1.9E-04 | 1.8E-02 |       2.6E-02  OK|
 | P-Mass               | 1.11 | 2.2E-05 | 1.1E-02 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 2.1E-04 | 2.3E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.2E-04 | 3.9E-02 |  5.7  4.5E-02  OK|
 | O-TurbFreq           | 1.04 | 2.0E-04 | 1.8E-02 | 11.6  5.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  124                    CPU SECONDS = 1.161E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.5E-04 | 1.1E-02 |       3.0E-02  OK|
 | V-Mom                | 1.03 | 1.5E-04 | 2.8E-02 |       2.7E-02  OK|
 | W-Mom                | 1.02 | 1.9E-04 | 2.1E-02 |       2.6E-02  OK|
 | P-Mass               | 1.12 | 2.5E-05 | 1.8E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 2.2E-04 | 2.3E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 4.3E-04 | 3.7E-02 |  5.7  4.5E-02  OK|
 | O-TurbFreq           | 1.01 | 2.0E-04 | 1.5E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  125                    CPU SECONDS = 1.170E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.5E-04 | 1.3E-02 |       2.9E-02  OK|
 | V-Mom                | 1.04 | 1.5E-04 | 3.7E-02 |       2.7E-02  OK|
 | W-Mom                | 0.99 | 1.9E-04 | 2.8E-02 |       2.6E-02  OK|
 | P-Mass               | 0.98 | 2.4E-05 | 3.4E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 2.2E-04 | 1.9E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 4.4E-04 | 3.8E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 0.99 | 1.9E-04 | 1.6E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  126                    CPU SECONDS = 1.178E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.6E-04 | 1.5E-02 |       2.7E-02  OK|
 | V-Mom                | 1.02 | 1.6E-04 | 4.1E-02 |       2.8E-02  OK|
 | W-Mom                | 0.97 | 1.9E-04 | 3.0E-02 |       2.6E-02  OK|
 | P-Mass               | 1.06 | 2.6E-05 | 3.6E-03 | 13.2  5.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 2.2E-04 | 2.1E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 4.6E-04 | 4.9E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 0.98 | 1.9E-04 | 1.4E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  127                    CPU SECONDS = 1.188E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.6E-04 | 1.5E-02 |       2.7E-02  OK|
 | V-Mom                | 0.99 | 1.5E-04 | 3.4E-02 |       2.9E-02  OK|
 | W-Mom                | 0.96 | 1.8E-04 | 2.7E-02 |       2.7E-02  OK|
 | P-Mass               | 1.06 | 2.7E-05 | 3.8E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 2.2E-04 | 2.3E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 4.8E-04 | 6.0E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.00 | 1.9E-04 | 1.6E-02 | 11.6  6.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  128                    CPU SECONDS = 1.197E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.5E-04 | 1.2E-02 |       2.6E-02  OK|
 | V-Mom                | 0.99 | 1.5E-04 | 2.1E-02 |       3.0E-02  OK|
 | W-Mom                | 0.97 | 1.8E-04 | 2.3E-02 |       2.8E-02  OK|
 | P-Mass               | 1.07 | 2.9E-05 | 1.0E-02 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 2.2E-04 | 2.6E-02 |  5.7  8.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 5.0E-04 | 7.1E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 0.99 | 1.9E-04 | 1.6E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  129                    CPU SECONDS = 1.206E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.5E-04 | 1.2E-02 |       2.6E-02  OK|
 | V-Mom                | 1.01 | 1.5E-04 | 2.5E-02 |       3.0E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 2.4E-02 |       2.8E-02  OK|
 | P-Mass               | 1.02 | 3.0E-05 | 4.2E-03 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 2.1E-04 | 2.6E-02 |  5.7  9.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.0E-04 | 6.2E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 0.96 | 1.8E-04 | 1.2E-02 | 11.6  6.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  130                    CPU SECONDS = 1.214E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.4E-04 | 1.2E-02 |       2.5E-02  OK|
 | V-Mom                | 1.01 | 1.6E-04 | 2.2E-02 |       2.9E-02  OK|
 | W-Mom                | 0.99 | 1.7E-04 | 2.6E-02 |       2.7E-02  OK|
 | P-Mass               | 1.02 | 3.0E-05 | 4.4E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 2.0E-04 | 2.3E-02 |  5.7  9.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.9E-04 | 4.6E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.97 | 1.7E-04 | 1.5E-02 | 11.6  6.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  131                    CPU SECONDS = 1.223E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.4E-04 | 1.2E-02 |       2.3E-02  OK|
 | V-Mom                | 1.00 | 1.6E-04 | 2.5E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 2.6E-02 |       2.6E-02  OK|
 | P-Mass               | 1.00 | 3.0E-05 | 4.4E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 1.9E-04 | 1.9E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.8E-04 | 4.5E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.98 | 1.7E-04 | 1.7E-02 | 11.6  7.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  132                    CPU SECONDS = 1.232E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.4E-04 | 1.1E-02 |       2.2E-02  OK|
 | V-Mom                | 0.99 | 1.6E-04 | 2.2E-02 |       2.5E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 2.8E-02 |       2.5E-02  OK|
 | P-Mass               | 1.00 | 3.0E-05 | 4.4E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.8E-04 | 1.7E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.7E-04 | 4.4E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.98 | 1.7E-04 | 1.8E-02 | 11.6  7.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  133                    CPU SECONDS = 1.241E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.4E-04 | 1.0E-02 |       2.2E-02  OK|
 | V-Mom                | 1.00 | 1.6E-04 | 2.2E-02 |       2.4E-02  OK|
 | W-Mom                | 0.99 | 1.6E-04 | 2.1E-02 |       2.7E-02  OK|
 | P-Mass               | 1.01 | 3.1E-05 | 5.8E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.8E-04 | 1.8E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.7E-04 | 4.2E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 1.00 | 1.7E-04 | 1.6E-02 | 11.6  7.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  134                    CPU SECONDS = 1.250E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.4E-04 | 1.0E-02 |       2.2E-02  OK|
 | V-Mom                | 1.01 | 1.6E-04 | 3.9E-02 |       2.4E-02  OK|
 | W-Mom                | 1.01 | 1.7E-04 | 2.7E-02 |       2.8E-02  OK|
 | P-Mass               | 1.00 | 3.1E-05 | 4.2E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.7E-04 | 1.8E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.7E-04 | 4.4E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.00 | 1.7E-04 | 1.4E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  135                    CPU SECONDS = 1.259E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.3E-04 | 1.0E-02 |       2.3E-02  OK|
 | V-Mom                | 1.01 | 1.6E-04 | 4.9E-02 |       2.4E-02  OK|
 | W-Mom                | 1.02 | 1.7E-04 | 3.6E-02 |       2.8E-02  OK|
 | P-Mass               | 1.01 | 3.1E-05 | 4.1E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 1.6E-04 | 1.6E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.8E-04 | 4.6E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.97 | 1.6E-04 | 1.4E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  136                    CPU SECONDS = 1.267E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.3E-04 | 9.4E-03 |       2.3E-02  OK|
 | V-Mom                | 0.97 | 1.5E-04 | 4.7E-02 |       2.4E-02  OK|
 | W-Mom                | 1.00 | 1.7E-04 | 3.5E-02 |       2.6E-02  OK|
 | P-Mass               | 1.00 | 3.1E-05 | 7.7E-03 | 13.2  5.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 1.5E-04 | 1.3E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.8E-04 | 4.5E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.97 | 1.6E-04 | 1.6E-02 | 11.6  8.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  137                    CPU SECONDS = 1.277E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 8.3E-03 |       2.3E-02  OK|
 | V-Mom                | 0.95 | 1.5E-04 | 3.6E-02 |       2.3E-02  OK|
 | W-Mom                | 0.97 | 1.6E-04 | 3.0E-02 |       2.6E-02  OK|
 | P-Mass               | 0.97 | 3.0E-05 | 3.5E-03 | 13.2  5.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.5E-04 | 1.4E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.8E-04 | 4.0E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.01 | 1.6E-04 | 2.1E-02 | 11.6  8.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  138                    CPU SECONDS = 1.286E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 7.6E-03 |       2.3E-02  OK|
 | V-Mom                | 0.96 | 1.4E-04 | 2.3E-02 |       2.3E-02  OK|
 | W-Mom                | 0.97 | 1.6E-04 | 2.2E-02 |       2.6E-02  OK|
 | P-Mass               | 0.97 | 2.9E-05 | 6.0E-03 | 13.2  5.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.5E-04 | 1.3E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.8E-04 | 4.3E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.01 | 1.6E-04 | 2.9E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  139                    CPU SECONDS = 1.295E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.2E-04 | 7.2E-03 |       2.3E-02  OK|
 | V-Mom                | 0.98 | 1.4E-04 | 1.8E-02 |       2.3E-02  OK|
 | W-Mom                | 0.99 | 1.6E-04 | 2.0E-02 |       2.8E-02  OK|
 | P-Mass               | 0.95 | 2.8E-05 | 3.0E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.5E-04 | 1.3E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.7E-04 | 4.3E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 0.94 | 1.5E-04 | 1.4E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  140                    CPU SECONDS = 1.303E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 5.9E-03 |       2.4E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 2.3E-02 |       2.4E-02  OK|
 | W-Mom                | 1.01 | 1.6E-04 | 2.4E-02 |       2.9E-02  OK|
 | P-Mass               | 0.95 | 2.6E-05 | 4.6E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.6E-04 | 1.3E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.7E-04 | 4.0E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 1.3E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  141                    CPU SECONDS = 1.313E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 6.0E-03 |       2.5E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 2.4E-02 |       2.5E-02  OK|
 | W-Mom                | 0.99 | 1.6E-04 | 2.2E-02 |       3.0E-02  OK|
 | P-Mass               | 0.95 | 2.5E-05 | 2.5E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.6E-04 | 1.4E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.7E-04 | 4.6E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.02 | 1.5E-04 | 1.5E-02 | 11.6  7.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  142                    CPU SECONDS = 1.322E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.1E-04 | 6.0E-03 |       2.6E-02  OK|
 | V-Mom                | 0.98 | 1.4E-04 | 2.0E-02 |       2.5E-02  OK|
 | W-Mom                | 0.98 | 1.5E-04 | 4.2E-02 |       3.1E-02  OK|
 | P-Mass               | 1.01 | 2.5E-05 | 7.1E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.6E-04 | 1.4E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.6E-04 | 3.6E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 1.5E-02 | 11.6  7.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  143                    CPU SECONDS = 1.331E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 7.8E-03 |       2.6E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 2.9E-02 |       2.5E-02  OK|
 | W-Mom                | 0.97 | 1.5E-04 | 2.3E-02 |       3.1E-02  OK|
 | P-Mass               | 1.00 | 2.5E-05 | 3.7E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.6E-04 | 1.5E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.5E-04 | 4.4E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 1.5E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  144                    CPU SECONDS = 1.340E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.1E-04 | 8.2E-03 |       2.6E-02  OK|
 | V-Mom                | 1.03 | 1.4E-04 | 4.8E-02 |       2.5E-02  OK|
 | W-Mom                | 0.99 | 1.5E-04 | 3.5E-02 |       3.2E-02  OK|
 | P-Mass               | 1.01 | 2.5E-05 | 4.0E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.5E-04 | 1.4E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.5E-04 | 3.6E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 1.4E-02 | 11.6  6.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  145                    CPU SECONDS = 1.349E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.1E-04 | 8.5E-03 |       2.5E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 5.3E-02 |       2.5E-02  OK|
 | W-Mom                | 1.00 | 1.5E-04 | 4.0E-02 |       3.0E-02  OK|
 | P-Mass               | 0.99 | 2.5E-05 | 7.3E-03 | 13.2  5.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.5E-04 | 1.6E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.4E-04 | 3.9E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.95 | 1.4E-04 | 1.4E-02 | 11.6  7.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  146                    CPU SECONDS = 1.358E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.1E-04 | 7.8E-03 |       2.4E-02  OK|
 | V-Mom                | 0.96 | 1.4E-04 | 4.8E-02 |       2.4E-02  OK|
 | W-Mom                | 0.97 | 1.4E-04 | 3.9E-02 |       2.8E-02  OK|
 | P-Mass               | 0.96 | 2.4E-05 | 3.3E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.5E-04 | 1.5E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.4E-04 | 3.3E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.95 | 1.3E-04 | 1.4E-02 | 11.6  6.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  147                    CPU SECONDS = 1.368E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.1E-04 | 7.3E-03 |       2.4E-02  OK|
 | V-Mom                | 0.95 | 1.3E-04 | 3.5E-02 |       2.4E-02  OK|
 | W-Mom                | 0.97 | 1.4E-04 | 4.1E-02 |       2.7E-02  OK|
 | P-Mass               | 1.07 | 2.6E-05 | 1.2E-02 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.4E-04 | 1.3E-02 |  5.7  7.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.4E-04 | 3.2E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.04 | 1.4E-04 | 2.0E-02 | 11.6  6.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  148                    CPU SECONDS = 1.377E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.1E-04 | 9.6E-03 |       2.4E-02  OK|
 | V-Mom                | 0.98 | 1.3E-04 | 2.5E-02 |       2.5E-02  OK|
 | W-Mom                | 0.96 | 1.3E-04 | 2.2E-02 |       2.8E-02  OK|
 | P-Mass               | 0.92 | 2.4E-05 | 3.8E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.4E-04 | 1.3E-02 |  5.7  7.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.5E-04 | 3.1E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.07 | 1.5E-04 | 2.9E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  149                    CPU SECONDS = 1.386E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.2E-04 | 9.8E-03 |       2.5E-02  OK|
 | V-Mom                | 1.05 | 1.3E-04 | 2.4E-02 |       2.5E-02  OK|
 | W-Mom                | 1.02 | 1.4E-04 | 2.4E-02 |       2.9E-02  OK|
 | P-Mass               | 1.13 | 2.7E-05 | 2.6E-02 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.3E-04 | 1.1E-02 |  5.7  7.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 4.7E-04 | 3.2E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 0.95 | 1.4E-04 | 1.4E-02 | 11.6  6.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  150                    CPU SECONDS = 1.395E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 8.0E-03 |       2.5E-02  OK|
 | V-Mom                | 1.08 | 1.4E-04 | 3.1E-02 |       2.5E-02  OK|
 | W-Mom                | 1.07 | 1.5E-04 | 4.0E-02 |       3.0E-02  OK|
 | P-Mass               | 0.96 | 2.6E-05 | 1.3E-02 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.3E-04 | 1.0E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 4.9E-04 | 3.4E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 1.02 | 1.4E-04 | 1.2E-02 | 11.6  7.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  151                    CPU SECONDS = 1.403E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.2E-04 | 8.0E-03 |       2.5E-02  OK|
 | V-Mom                | 1.02 | 1.5E-04 | 3.0E-02 |       2.5E-02  OK|
 | W-Mom                | 1.00 | 1.5E-04 | 2.6E-02 |       3.0E-02  OK|
 | P-Mass               | 0.99 | 2.6E-05 | 1.4E-02 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.3E-04 | 1.1E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.9E-04 | 3.4E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 1.04 | 1.5E-04 | 1.3E-02 | 11.6  7.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  152                    CPU SECONDS = 1.412E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.2E-04 | 8.9E-03 |       2.6E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 2.7E-02 |       2.4E-02  OK|
 | W-Mom                | 0.97 | 1.4E-04 | 2.2E-02 |       3.1E-02  OK|
 | P-Mass               | 0.96 | 2.5E-05 | 3.0E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.3E-04 | 1.2E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.0E-04 | 4.0E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 0.97 | 1.4E-04 | 1.3E-02 | 11.6  8.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  153                    CPU SECONDS = 1.422E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.2E-04 | 9.2E-03 |       2.5E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.7E-02 |       2.4E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 3.7E-02 |       3.3E-02  OK|
 | P-Mass               | 1.01 | 2.5E-05 | 6.8E-03 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.4E-04 | 1.2E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 5.2E-04 | 5.5E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 0.99 | 1.4E-04 | 1.5E-02 | 11.6  9.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  154                    CPU SECONDS = 1.431E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 9.6E-03 |       2.5E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 2.1E-02 |       2.3E-02  OK|
 | W-Mom                | 1.01 | 1.4E-04 | 4.0E-02 |       3.3E-02  OK|
 | P-Mass               | 1.04 | 2.6E-05 | 1.2E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.4E-04 | 1.2E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.06 | 5.5E-04 | 7.0E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 1.02 | 1.5E-04 | 1.6E-02 | 11.6  9.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  155                    CPU SECONDS = 1.439E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 1.0E-02 |       2.6E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 3.1E-02 |       2.3E-02  OK|
 | W-Mom                | 1.02 | 1.5E-04 | 2.1E-02 |       3.2E-02  OK|
 | P-Mass               | 1.04 | 2.7E-05 | 1.2E-02 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.1E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.07 | 5.8E-04 | 7.9E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.01 | 1.5E-04 | 1.6E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  156                    CPU SECONDS = 1.448E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.2E-04 | 1.0E-02 |       2.7E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 3.5E-02 |       2.2E-02  OK|
 | W-Mom                | 1.02 | 1.5E-04 | 2.3E-02 |       3.0E-02  OK|
 | P-Mass               | 0.97 | 2.6E-05 | 2.9E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.2E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 5.9E-04 | 7.0E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.01 | 1.5E-04 | 1.6E-02 | 11.6  1.1E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  157                    CPU SECONDS = 1.457E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.3E-04 | 9.3E-03 |       2.8E-02  OK|
 | V-Mom                | 0.98 | 1.4E-04 | 2.9E-02 |       2.2E-02  OK|
 | W-Mom                | 1.01 | 1.5E-04 | 3.2E-02 |       2.9E-02  OK|
 | P-Mass               | 1.12 | 3.0E-05 | 1.2E-02 | 13.2  5.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.3E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.9E-04 | 5.5E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.03 | 1.5E-04 | 1.8E-02 | 11.6  1.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  158                    CPU SECONDS = 1.466E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.3E-04 | 9.3E-03 |       2.8E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.0E-02 |       2.3E-02  OK|
 | W-Mom                | 1.02 | 1.5E-04 | 3.4E-02 |       2.9E-02  OK|
 | P-Mass               | 1.01 | 3.0E-05 | 2.2E-02 | 13.2  5.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.4E-04 | 1.3E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.8E-04 | 4.5E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.02 | 1.6E-04 | 2.2E-02 | 11.6  9.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  159                    CPU SECONDS = 1.476E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.3E-04 | 9.5E-03 |       2.9E-02  OK|
 | V-Mom                | 1.04 | 1.5E-04 | 2.6E-02 |       2.4E-02  OK|
 | W-Mom                | 1.03 | 1.6E-04 | 2.5E-02 |       3.0E-02  OK|
 | P-Mass               | 0.93 | 2.8E-05 | 4.6E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.1E-02 |  5.7  7.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.8E-04 | 4.5E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 1.7E-02 | 11.6  9.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  160                    CPU SECONDS = 1.484E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.3E-04 | 9.8E-03 |       3.0E-02  OK|
 | V-Mom                | 1.02 | 1.5E-04 | 2.3E-02 |       2.6E-02  OK|
 | W-Mom                | 1.04 | 1.6E-04 | 2.5E-02 |       3.2E-02  OK|
 | P-Mass               | 1.09 | 3.0E-05 | 2.5E-02 | 13.2  5.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.5% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.4E-04 | 9.8E-03 |  5.7  7.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.8E-04 | 5.3E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 1.01 | 1.6E-04 | 1.5E-02 | 11.6  9.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  161                    CPU SECONDS = 1.494E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.3E-04 | 8.9E-03 |       3.2E-02  OK|
 | V-Mom                | 1.01 | 1.5E-04 | 2.6E-02 |       2.6E-02  OK|
 | W-Mom                | 1.02 | 1.7E-04 | 2.0E-02 |       3.3E-02  OK|
 | P-Mass               | 0.90 | 2.7E-05 | 1.2E-02 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.5E-02 |  5.7  6.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 6.0E-04 | 5.5E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 1.03 | 1.6E-04 | 1.5E-02 | 11.6  8.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  162                    CPU SECONDS = 1.502E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 9.0E-03 |       3.2E-02  OK|
 | V-Mom                | 1.01 | 1.5E-04 | 2.5E-02 |       2.6E-02  OK|
 | W-Mom                | 1.02 | 1.7E-04 | 3.2E-02 |       3.4E-02  OK|
 | P-Mass               | 0.95 | 2.6E-05 | 5.9E-03 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.6E-02 |  5.7  6.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 6.3E-04 | 5.2E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 1.01 | 1.6E-04 | 1.7E-02 | 11.6  8.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  163                    CPU SECONDS = 1.511E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 7.9E-03 |       3.2E-02  OK|
 | V-Mom                | 1.03 | 1.6E-04 | 4.1E-02 |       2.7E-02  OK|
 | W-Mom                | 1.01 | 1.7E-04 | 2.8E-02 |       3.6E-02  OK|
 | P-Mass               | 1.00 | 2.6E-05 | 1.0E-02 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 1.7E-02 |  5.7  7.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 6.4E-04 | 6.8E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 1.00 | 1.6E-04 | 1.4E-02 | 11.6  9.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  164                    CPU SECONDS = 1.519E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.2E-04 | 8.6E-03 |       3.2E-02  OK|
 | V-Mom                | 1.03 | 1.6E-04 | 6.1E-02 |       2.8E-02  OK|
 | W-Mom                | 1.01 | 1.7E-04 | 4.1E-02 |       3.7E-02  OK|
 | P-Mass               | 0.95 | 2.5E-05 | 5.1E-03 | 13.2  6.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   7.9% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.4E-04 | 1.3E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 6.2E-04 | 7.3E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.98 | 1.6E-04 | 1.5E-02 | 11.6  9.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  165                    CPU SECONDS = 1.529E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 8.9E-03 |       3.2E-02  OK|
 | V-Mom                | 0.99 | 1.6E-04 | 5.7E-02 |       2.8E-02  OK|
 | W-Mom                | 1.00 | 1.7E-04 | 4.0E-02 |       3.8E-02  OK|
 | P-Mass               | 1.01 | 2.5E-05 | 1.1E-02 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.5E-04 | 1.6E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 6.2E-04 | 6.6E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.97 | 1.5E-04 | 1.4E-02 | 11.6  9.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  166                    CPU SECONDS = 1.538E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.2E-04 | 8.0E-03 |       3.2E-02  OK|
 | V-Mom                | 0.96 | 1.5E-04 | 4.2E-02 |       2.8E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 3.3E-02 |       3.7E-02  OK|
 | P-Mass               | 0.95 | 2.4E-05 | 3.5E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.5E-04 | 1.6E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 6.3E-04 | 5.9E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 0.97 | 1.5E-04 | 1.3E-02 | 11.6  8.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  167                    CPU SECONDS = 1.547E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.2E-04 | 7.1E-03 |       3.1E-02  OK|
 | V-Mom                | 0.96 | 1.5E-04 | 2.9E-02 |       2.7E-02  OK|
 | W-Mom                | 0.97 | 1.6E-04 | 2.8E-02 |       3.7E-02  OK|
 | P-Mass               | 0.98 | 2.3E-05 | 5.2E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.5E-04 | 1.8E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 6.3E-04 | 4.4E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 1.01 | 1.5E-04 | 1.2E-02 | 11.6  8.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  168                    CPU SECONDS = 1.556E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.2E-04 | 7.3E-03 |       3.1E-02  OK|
 | V-Mom                | 0.99 | 1.5E-04 | 2.2E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.6E-04 | 2.2E-02 |       3.8E-02  OK|
 | P-Mass               | 0.98 | 2.3E-05 | 3.8E-03 | 13.2  7.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.5E-04 | 1.7E-02 |  5.7  7.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 6.3E-04 | 3.8E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 1.04 | 1.6E-04 | 2.7E-02 | 11.6  7.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  169                    CPU SECONDS = 1.564E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 6.9E-03 |       3.2E-02  OK|
 | V-Mom                | 1.01 | 1.5E-04 | 2.1E-02 |       2.8E-02  OK|
 | W-Mom                | 1.01 | 1.6E-04 | 2.4E-02 |       3.9E-02  OK|
 | P-Mass               | 1.07 | 2.4E-05 | 1.2E-02 | 13.2  7.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.5E-04 | 1.9E-02 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 6.3E-04 | 3.8E-02 |  5.7  5.6E-02  OK|
 | O-TurbFreq           | 0.96 | 1.5E-04 | 1.7E-02 | 11.6  7.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  170                    CPU SECONDS = 1.573E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.2E-04 | 5.9E-03 |       3.3E-02  OK|
 | V-Mom                | 1.02 | 1.5E-04 | 2.8E-02 |       2.9E-02  OK|
 | W-Mom                | 1.03 | 1.7E-04 | 2.7E-02 |       4.1E-02  OK|
 | P-Mass               | 0.97 | 2.4E-05 | 2.7E-03 | 13.2  7.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.4E-04 | 2.3E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 6.2E-04 | 3.5E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 0.98 | 1.4E-04 | 1.4E-02 | 11.6  7.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  171                    CPU SECONDS = 1.582E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 6.1E-03 |       3.4E-02  OK|
 | V-Mom                | 0.98 | 1.5E-04 | 2.5E-02 |       3.0E-02  OK|
 | W-Mom                | 1.01 | 1.7E-04 | 2.7E-02 |       4.2E-02  OK|
 | P-Mass               | 1.05 | 2.5E-05 | 9.6E-03 | 13.2  7.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.93 | 1.3E-04 | 2.8E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 5.9E-04 | 4.0E-02 |  5.7  5.9E-02  OK|
 | O-TurbFreq           | 1.06 | 1.5E-04 | 1.8E-02 | 11.6  7.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  172                    CPU SECONDS = 1.592E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 7.1E-03 |       3.2E-02  OK|
 | V-Mom                | 0.95 | 1.4E-04 | 2.4E-02 |       3.1E-02  OK|
 | W-Mom                | 0.96 | 1.6E-04 | 2.3E-02 |       4.0E-02  OK|
 | P-Mass               | 0.99 | 2.5E-05 | 2.8E-03 | 13.2  6.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.3E-04 | 2.6E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 5.6E-04 | 4.0E-02 |  5.7  6.2E-02  OK|
 | O-TurbFreq           | 1.01 | 1.6E-04 | 2.1E-02 | 11.6  7.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  173                    CPU SECONDS = 1.600E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.2E-04 | 7.9E-03 |       3.0E-02  OK|
 | V-Mom                | 0.96 | 1.4E-04 | 2.2E-02 |       3.0E-02  OK|
 | W-Mom                | 0.95 | 1.5E-04 | 4.4E-02 |       3.7E-02  OK|
 | P-Mass               | 1.02 | 2.5E-05 | 9.5E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.3E-04 | 2.6E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 5.3E-04 | 4.3E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 2.3E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  174                    CPU SECONDS = 1.608E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.2E-04 | 8.3E-03 |       2.8E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 3.7E-02 |       2.9E-02  OK|
 | W-Mom                | 0.95 | 1.5E-04 | 4.0E-02 |       3.6E-02  OK|
 | P-Mass               | 1.04 | 2.6E-05 | 1.6E-02 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.3E-04 | 2.7E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.2E-04 | 4.7E-02 |  5.7  6.3E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 1.3E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  175                    CPU SECONDS = 1.617E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.1E-04 | 7.8E-03 |       2.8E-02  OK|
 | V-Mom                | 1.02 | 1.4E-04 | 5.1E-02 |       2.8E-02  OK|
 | W-Mom                | 0.97 | 1.4E-04 | 3.6E-02 |       3.6E-02  OK|
 | P-Mass               | 0.89 | 2.3E-05 | 9.7E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.3E-04 | 2.4E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 5.1E-04 | 5.5E-02 |  5.7  6.4E-02  OK|
 | O-TurbFreq           | 0.97 | 1.4E-04 | 1.1E-02 | 11.6  6.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  176                    CPU SECONDS = 1.626E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 1.1E-04 | 7.8E-03 |       2.9E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 5.5E-02 |       2.7E-02  OK|
 | W-Mom                | 0.97 | 1.4E-04 | 4.0E-02 |       3.6E-02  OK|
 | P-Mass               | 0.87 | 2.0E-05 | 4.6E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.3E-04 | 2.4E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.0E-04 | 4.3E-02 |  5.7  6.2E-02  OK|
 | O-TurbFreq           | 0.99 | 1.4E-04 | 9.3E-03 | 11.6  6.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  177                    CPU SECONDS = 1.635E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 7.3E-03 |       3.1E-02  OK|
 | V-Mom                | 0.97 | 1.3E-04 | 4.8E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.4E-04 | 3.6E-02 |       3.6E-02  OK|
 | P-Mass               | 0.95 | 1.9E-05 | 2.6E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.3E-04 | 2.5E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.9E-04 | 3.3E-02 |  5.7  5.7E-02  OK|
 | O-TurbFreq           | 1.02 | 1.5E-04 | 1.3E-02 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  178                    CPU SECONDS = 1.644E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.1E-04 | 8.7E-03 |       3.1E-02  OK|
 | V-Mom                | 0.96 | 1.3E-04 | 3.7E-02 |       2.6E-02  OK|
 | W-Mom                | 1.00 | 1.4E-04 | 4.5E-02 |       3.6E-02  OK|
 | P-Mass               | 1.07 | 2.0E-05 | 8.2E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.8% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.2E-04 | 2.5E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.9E-04 | 3.2E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 1.05 | 1.5E-04 | 2.3E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  179                    CPU SECONDS = 1.652E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.0E-04 | 8.9E-03 |       3.1E-02  OK|
 | V-Mom                | 0.99 | 1.3E-04 | 2.2E-02 |       2.6E-02  OK|
 | W-Mom                | 0.99 | 1.3E-04 | 4.3E-02 |       3.6E-02  OK|
 | P-Mass               | 1.01 | 2.1E-05 | 8.6E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.2E-04 | 2.3E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 5.0E-04 | 3.6E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 2.8E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  180                    CPU SECONDS = 1.661E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.0E-04 | 9.7E-03 |       3.1E-02  OK|
 | V-Mom                | 1.05 | 1.3E-04 | 2.8E-02 |       2.6E-02  OK|
 | W-Mom                | 1.05 | 1.4E-04 | 4.1E-02 |       3.8E-02  OK|
 | P-Mass               | 1.07 | 2.2E-05 | 8.8E-03 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.3E-04 | 2.5E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.07 | 5.3E-04 | 4.6E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.93 | 1.4E-04 | 1.0E-02 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  181                    CPU SECONDS = 1.669E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.0E-04 | 1.0E-02 |       3.1E-02  OK|
 | V-Mom                | 1.05 | 1.4E-04 | 2.9E-02 |       2.6E-02  OK|
 | W-Mom                | 1.04 | 1.5E-04 | 2.8E-02 |       3.8E-02  OK|
 | P-Mass               | 0.97 | 2.1E-05 | 6.3E-03 | 13.2  6.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.05 | 1.4E-04 | 2.7E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.06 | 5.6E-04 | 5.3E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.03 | 1.4E-04 | 8.3E-03 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  182                    CPU SECONDS = 1.678E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 1.0E-02 |       3.1E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.4E-02 |       2.6E-02  OK|
 | W-Mom                | 1.01 | 1.5E-04 | 4.0E-02 |       3.7E-02  OK|
 | P-Mass               | 1.00 | 2.1E-05 | 1.0E-02 | 13.2  7.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.4E-04 | 2.8E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.6E-04 | 4.8E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.04 | 1.5E-04 | 1.3E-02 | 11.6  6.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  183                    CPU SECONDS = 1.687E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.1E-04 | 1.1E-02 |       3.1E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.4E-02 |       2.7E-02  OK|
 | W-Mom                | 0.99 | 1.5E-04 | 4.5E-02 |       3.7E-02  OK|
 | P-Mass               | 1.06 | 2.3E-05 | 1.4E-02 | 13.2  6.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 2.7E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.5E-04 | 6.3E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 1.4E-02 | 11.6  6.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  184                    CPU SECONDS = 1.696E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 1.2E-02 |       3.1E-02  OK|
 | V-Mom                | 1.02 | 1.4E-04 | 3.4E-02 |       2.7E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 3.1E-02 |       3.7E-02  OK|
 | P-Mass               | 0.97 | 2.2E-05 | 9.2E-03 | 13.2  6.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.3E-04 | 2.7E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.4E-04 | 6.6E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 0.97 | 1.4E-04 | 1.4E-02 | 11.6  6.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  185                    CPU SECONDS = 1.705E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 1.3E-02 |       3.2E-02  OK|
 | V-Mom                | 1.04 | 1.5E-04 | 5.3E-02 |       2.7E-02  OK|
 | W-Mom                | 1.04 | 1.5E-04 | 4.4E-02 |       3.9E-02  OK|
 | P-Mass               | 1.09 | 2.4E-05 | 9.8E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 1.3E-04 | 2.8E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.3E-04 | 6.8E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 0.99 | 1.4E-04 | 1.2E-02 | 11.6  6.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  186                    CPU SECONDS = 1.713E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.0E-04 | 1.2E-02 |       3.3E-02  OK|
 | V-Mom                | 1.00 | 1.5E-04 | 6.1E-02 |       2.7E-02  OK|
 | W-Mom                | 0.97 | 1.5E-04 | 4.3E-02 |       3.9E-02  OK|
 | P-Mass               | 0.90 | 2.2E-05 | 4.5E-03 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.2E-04 | 2.6E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.4E-04 | 6.4E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 1.00 | 1.4E-04 | 7.7E-03 | 11.6  6.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  187                    CPU SECONDS = 1.722E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 9.9E-05 | 1.1E-02 |       3.3E-02  OK|
 | V-Mom                | 0.94 | 1.4E-04 | 4.9E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.4E-04 | 3.8E-02 |       3.9E-02  OK|
 | P-Mass               | 0.94 | 2.0E-05 | 2.5E-03 | 13.2  6.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.2E-04 | 3.1E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.3E-04 | 5.5E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 1.02 | 1.4E-04 | 8.8E-03 | 11.6  6.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  188                    CPU SECONDS = 1.731E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.0E-04 | 9.1E-03 |       3.3E-02  OK|
 | V-Mom                | 0.93 | 1.3E-04 | 3.1E-02 |       2.7E-02  OK|
 | W-Mom                | 0.98 | 1.4E-04 | 3.4E-02 |       3.9E-02  OK|
 | P-Mass               | 0.99 | 2.0E-05 | 7.7E-03 | 13.2  7.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.2E-04 | 3.7E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.2E-04 | 4.1E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.06 | 1.5E-04 | 2.1E-02 | 11.6  6.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  189                    CPU SECONDS = 1.741E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.0E-04 | 8.9E-03 |       3.3E-02  OK|
 | V-Mom                | 0.97 | 1.3E-04 | 2.4E-02 |       2.9E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 2.2E-02 |       4.2E-02  OK|
 | P-Mass               | 0.97 | 1.9E-05 | 5.5E-03 | 13.2  8.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.2E-04 | 3.4E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.1E-04 | 3.1E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.06 | 1.6E-04 | 3.1E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  190                    CPU SECONDS = 1.750E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.0E-04 | 9.5E-03 |       3.4E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 1.9E-02 |       3.0E-02  OK|
 | W-Mom                | 1.04 | 1.4E-04 | 2.0E-02 |       4.3E-02  OK|
 | P-Mass               | 1.01 | 2.0E-05 | 8.1E-03 | 13.2  8.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.2E-04 | 2.8E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 5.4E-04 | 3.8E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.95 | 1.5E-04 | 1.6E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  191                    CPU SECONDS = 1.758E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.0E-04 | 7.0E-03 |       3.4E-02  OK|
 | V-Mom                | 1.05 | 1.3E-04 | 2.5E-02 |       3.0E-02  OK|
 | W-Mom                | 1.07 | 1.5E-04 | 2.5E-02 |       4.4E-02  OK|
 | P-Mass               | 0.98 | 1.9E-05 | 2.1E-03 | 13.2  8.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.2E-04 | 2.1E-02 |  5.7  8.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.11 | 5.9E-04 | 5.7E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 1.01 | 1.5E-04 | 9.9E-03 | 11.6  6.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  192                    CPU SECONDS = 1.767E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 4.7E-03 |       3.5E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.4E-02 |       3.0E-02  OK|
 | W-Mom                | 1.03 | 1.6E-04 | 2.6E-02 |       4.1E-02  OK|
 | P-Mass               | 1.04 | 2.0E-05 | 1.0E-02 | 13.2  8.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.2E-04 | 2.3E-02 |  5.7  9.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.10 | 6.5E-04 | 6.5E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 1.07 | 1.7E-04 | 1.4E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  193                    CPU SECONDS = 1.777E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 4.3E-03 |       3.4E-02  OK|
 | V-Mom                | 0.97 | 1.3E-04 | 2.2E-02 |       3.1E-02  OK|
 | W-Mom                | 0.99 | 1.6E-04 | 3.4E-02 |       3.8E-02  OK|
 | P-Mass               | 1.06 | 2.1E-05 | 1.1E-02 | 13.2  7.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.2E-04 | 3.2E-02 |  5.7  8.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 6.6E-04 | 8.2E-02 |  5.7  5.5E-02  OK|
 | O-TurbFreq           | 1.01 | 1.7E-04 | 1.3E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  194                    CPU SECONDS = 1.786E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.1E-04 | 5.9E-03 |       3.4E-02  OK|
 | V-Mom                | 0.99 | 1.3E-04 | 2.1E-02 |       3.2E-02  OK|
 | W-Mom                | 0.99 | 1.5E-04 | 3.8E-02 |       3.9E-02  OK|
 | P-Mass               | 1.02 | 2.2E-05 | 8.2E-03 | 13.2  7.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.2E-04 | 3.3E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 6.4E-04 | 1.1E-01 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.95 | 1.6E-04 | 1.3E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  195                    CPU SECONDS = 1.795E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.1E-04 | 7.1E-03 |       3.4E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 3.8E-02 |       3.2E-02  OK|
 | W-Mom                | 1.00 | 1.5E-04 | 3.0E-02 |       4.1E-02  OK|
 | P-Mass               | 1.05 | 2.3E-05 | 7.2E-03 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.2E-04 | 3.3E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 6.5E-04 | 8.8E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 0.95 | 1.5E-04 | 1.1E-02 | 11.6  5.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  196                    CPU SECONDS = 1.804E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 9.0E-03 |       3.4E-02  OK|
 | V-Mom                | 1.02 | 1.3E-04 | 5.0E-02 |       3.2E-02  OK|
 | W-Mom                | 1.01 | 1.6E-04 | 4.0E-02 |       4.4E-02  OK|
 | P-Mass               | 0.99 | 2.2E-05 | 7.9E-03 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.2E-04 | 3.3E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 6.4E-04 | 6.7E-02 |  5.7  4.3E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 8.9E-03 | 11.6  5.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  197                    CPU SECONDS = 1.813E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.0E-04 | 1.1E-02 |       3.4E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 5.4E-02 |       3.2E-02  OK|
 | W-Mom                | 0.99 | 1.6E-04 | 4.0E-02 |       4.4E-02  OK|
 | P-Mass               | 0.96 | 2.2E-05 | 3.7E-03 | 13.2  7.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.1E-04 | 3.0E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.94 | 6.0E-04 | 4.4E-02 |  5.7  4.3E-02  OK|
 | O-TurbFreq           | 1.02 | 1.5E-04 | 8.4E-03 | 11.6  5.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  198                    CPU SECONDS = 1.821E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.0E-04 | 9.7E-03 |       3.4E-02  OK|
 | V-Mom                | 0.98 | 1.3E-04 | 4.4E-02 |       3.2E-02  OK|
 | W-Mom                | 0.98 | 1.5E-04 | 3.5E-02 |       4.4E-02  OK|
 | P-Mass               | 0.98 | 2.1E-05 | 3.1E-03 | 13.2  7.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.1E-04 | 2.4E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.93 | 5.6E-04 | 3.6E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.02 | 1.5E-04 | 1.2E-02 | 11.6  4.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  199                    CPU SECONDS = 1.830E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.0E-04 | 9.6E-03 |       3.5E-02  OK|
 | V-Mom                | 0.98 | 1.3E-04 | 3.2E-02 |       3.3E-02  OK|
 | W-Mom                | 0.98 | 1.5E-04 | 2.8E-02 |       4.5E-02  OK|
 | P-Mass               | 0.98 | 2.1E-05 | 2.8E-03 | 13.2  8.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.1E-04 | 2.6E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.5E-04 | 4.0E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 1.03 | 1.6E-04 | 2.0E-02 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  200                    CPU SECONDS = 1.839E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.0E-04 | 8.4E-03 |       3.6E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 2.2E-02 |       3.4E-02  OK|
 | W-Mom                | 1.00 | 1.5E-04 | 2.4E-02 |       4.7E-02  OK|
 | P-Mass               | 0.97 | 2.0E-05 | 2.6E-03 | 13.2  8.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.1E-04 | 2.1E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.5E-04 | 3.8E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 0.99 | 1.6E-04 | 2.1E-02 | 11.6  4.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  201                    CPU SECONDS = 1.848E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.0E-04 | 7.4E-03 |       3.6E-02  OK|
 | V-Mom                | 1.02 | 1.3E-04 | 2.2E-02 |       3.4E-02  OK|
 | W-Mom                | 1.01 | 1.5E-04 | 2.1E-02 |       4.9E-02  OK|
 | P-Mass               | 0.96 | 1.9E-05 | 3.8E-03 | 13.2  8.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.2E-04 | 2.6E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 5.6E-04 | 4.0E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 0.97 | 1.5E-04 | 9.2E-03 | 11.6  4.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  202                    CPU SECONDS = 1.857E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 7.0E-03 |       3.7E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 2.3E-02 |       3.3E-02  OK|
 | W-Mom                | 1.00 | 1.5E-04 | 2.5E-02 |       4.9E-02  OK|
 | P-Mass               | 0.94 | 1.8E-05 | 2.0E-03 | 13.2  9.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.2E-04 | 2.8E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 5.9E-04 | 4.4E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.06 | 1.6E-04 | 9.7E-03 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  203                    CPU SECONDS = 1.865E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.1E-04 | 6.6E-03 |       3.5E-02  OK|
 | V-Mom                | 0.96 | 1.2E-04 | 2.5E-02 |       3.4E-02  OK|
 | W-Mom                | 0.96 | 1.4E-04 | 3.7E-02 |       4.8E-02  OK|
 | P-Mass               | 0.97 | 1.8E-05 | 5.5E-03 | 13.2  8.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.2E-04 | 2.9E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 5.7E-04 | 4.2E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.06 | 1.7E-04 | 1.3E-02 | 11.6  4.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  204                    CPU SECONDS = 1.874E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.1E-04 | 7.2E-03 |       3.4E-02  OK|
 | V-Mom                | 0.96 | 1.2E-04 | 2.1E-02 |       3.5E-02  OK|
 | W-Mom                | 0.93 | 1.4E-04 | 2.4E-02 |       4.7E-02  OK|
 | P-Mass               | 0.98 | 1.7E-05 | 2.5E-03 | 13.2  8.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.02 | 1.2E-04 | 2.9E-02 |  5.7  9.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.6E-04 | 4.7E-02 |  5.7  4.5E-02  OK|
 | O-TurbFreq           | 1.00 | 1.7E-04 | 1.5E-02 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  205                    CPU SECONDS = 1.882E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.1E-04 | 7.1E-03 |       3.3E-02  OK|
 | V-Mom                | 0.98 | 1.1E-04 | 2.4E-02 |       3.4E-02  OK|
 | W-Mom                | 0.96 | 1.3E-04 | 3.4E-02 |       4.7E-02  OK|
 | P-Mass               | 1.01 | 1.8E-05 | 5.1E-03 | 13.2  8.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.3E-04 | 3.0E-02 |  5.7  9.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 5.3E-04 | 5.1E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 0.95 | 1.6E-04 | 1.4E-02 | 11.6  4.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  206                    CPU SECONDS = 1.891E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.0E-04 | 7.4E-03 |       3.3E-02  OK|
 | V-Mom                | 1.01 | 1.2E-04 | 3.9E-02 |       3.5E-02  OK|
 | W-Mom                | 0.98 | 1.3E-04 | 2.8E-02 |       4.8E-02  OK|
 | P-Mass               | 0.98 | 1.7E-05 | 2.7E-03 | 13.2  8.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.3E-04 | 2.9E-02 |  5.7  9.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 5.2E-04 | 4.6E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 0.94 | 1.5E-04 | 1.0E-02 | 11.6  5.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  207                    CPU SECONDS = 1.901E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.97 | 1.0E-04 | 7.7E-03 |       3.2E-02  OK|
 | V-Mom                | 1.03 | 1.2E-04 | 4.6E-02 |       3.5E-02  OK|
 | W-Mom                | 1.01 | 1.3E-04 | 3.2E-02 |       4.6E-02  OK|
 | P-Mass               | 1.01 | 1.7E-05 | 4.6E-03 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.4E-04 | 2.9E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.2E-04 | 4.0E-02 |  5.7  4.5E-02  OK|
 | O-TurbFreq           | 1.00 | 1.5E-04 | 8.9E-03 | 11.6  5.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  208                    CPU SECONDS = 1.910E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.0E-04 | 7.4E-03 |       3.2E-02  OK|
 | V-Mom                | 1.01 | 1.2E-04 | 4.3E-02 |       3.5E-02  OK|
 | W-Mom                | 1.00 | 1.3E-04 | 3.4E-02 |       4.4E-02  OK|
 | P-Mass               | 1.04 | 1.8E-05 | 2.4E-03 | 13.2  7.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.4E-04 | 1.9E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 5.4E-04 | 4.7E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.03 | 1.6E-04 | 1.0E-02 | 11.6  5.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  209                    CPU SECONDS = 1.918E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.05 | 1.1E-04 | 7.8E-03 |       3.2E-02  OK|
 | V-Mom                | 1.00 | 1.2E-04 | 3.2E-02 |       3.5E-02  OK|
 | W-Mom                | 1.00 | 1.3E-04 | 2.7E-02 |       4.3E-02  OK|
 | P-Mass               | 1.09 | 2.0E-05 | 2.5E-03 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.4E-04 | 2.3E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.4E-04 | 4.5E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.02 | 1.6E-04 | 1.8E-02 | 11.6  5.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  210                    CPU SECONDS = 1.927E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.1E-04 | 7.8E-03 |       3.1E-02  OK|
 | V-Mom                | 1.00 | 1.2E-04 | 2.3E-02 |       3.5E-02  OK|
 | W-Mom                | 1.01 | 1.3E-04 | 2.1E-02 |       4.4E-02  OK|
 | P-Mass               | 1.09 | 2.1E-05 | 3.3E-03 | 13.2  7.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.4E-04 | 2.2E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.3E-04 | 3.4E-02 |  5.7  4.4E-02  OK|
 | O-TurbFreq           | 1.00 | 1.6E-04 | 2.4E-02 | 11.6  6.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  211                    CPU SECONDS = 1.936E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.2E-04 | 8.1E-03 |       3.1E-02  OK|
 | V-Mom                | 1.02 | 1.2E-04 | 2.2E-02 |       3.5E-02  OK|
 | W-Mom                | 1.03 | 1.3E-04 | 1.9E-02 |       4.5E-02  OK|
 | P-Mass               | 1.07 | 2.3E-05 | 3.9E-03 | 13.2  8.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.3E-04 | 1.7E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.3E-04 | 3.4E-02 |  5.7  4.3E-02  OK|
 | O-TurbFreq           | 0.98 | 1.6E-04 | 1.2E-02 | 11.6  6.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  212                    CPU SECONDS = 1.945E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.2E-04 | 8.4E-03 |       3.0E-02  OK|
 | V-Mom                | 1.04 | 1.3E-04 | 2.3E-02 |       3.5E-02  OK|
 | W-Mom                | 1.06 | 1.4E-04 | 2.4E-02 |       4.4E-02  OK|
 | P-Mass               | 1.07 | 2.4E-05 | 9.9E-03 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.3E-04 | 2.1E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 5.4E-04 | 3.7E-02 |  5.7  4.3E-02  OK|
 | O-TurbFreq           | 1.05 | 1.6E-04 | 1.0E-02 | 11.6  5.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  213                    CPU SECONDS = 1.954E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.2E-04 | 8.5E-03 |       2.9E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 2.4E-02 |       3.4E-02  OK|
 | W-Mom                | 1.02 | 1.4E-04 | 2.2E-02 |       4.4E-02  OK|
 | P-Mass               | 0.96 | 2.4E-05 | 4.3E-03 | 13.2  8.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.3E-04 | 2.2E-02 |  5.7  7.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.04 | 5.6E-04 | 3.6E-02 |  5.7  4.4E-02  OK|
 | O-TurbFreq           | 1.08 | 1.8E-04 | 1.3E-02 | 11.6  4.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  214                    CPU SECONDS = 1.963E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.3E-04 | 8.8E-03 |       2.9E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 2.5E-02 |       3.4E-02  OK|
 | W-Mom                | 1.00 | 1.4E-04 | 2.2E-02 |       4.3E-02  OK|
 | P-Mass               | 1.02 | 2.4E-05 | 9.1E-03 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.3E-04 | 2.3E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.6E-04 | 3.7E-02 |  5.7  4.3E-02  OK|
 | O-TurbFreq           | 1.02 | 1.8E-04 | 1.4E-02 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  215                    CPU SECONDS = 1.971E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.3E-04 | 9.3E-03 |       2.9E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 1.9E-02 |       3.3E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 2.8E-02 |       4.3E-02  OK|
 | P-Mass               | 0.97 | 2.3E-05 | 4.7E-03 | 13.2  7.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.2% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.3E-04 | 2.3E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 5.3E-04 | 3.9E-02 |  5.7  4.2E-02  OK|
 | O-TurbFreq           | 0.96 | 1.7E-04 | 1.4E-02 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  216                    CPU SECONDS = 1.980E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.3E-04 | 9.6E-03 |       3.0E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 3.3E-02 |       3.3E-02  OK|
 | W-Mom                | 1.01 | 1.4E-04 | 2.4E-02 |       4.5E-02  OK|
 | P-Mass               | 0.95 | 2.2E-05 | 4.0E-03 | 13.2  7.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.3E-04 | 2.3E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.2E-04 | 3.9E-02 |  5.7  4.3E-02  OK|
 | O-TurbFreq           | 0.93 | 1.6E-04 | 1.1E-02 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  217                    CPU SECONDS = 1.989E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.3E-04 | 1.1E-02 |       3.1E-02  OK|
 | V-Mom                | 1.02 | 1.3E-04 | 4.5E-02 |       3.5E-02  OK|
 | W-Mom                | 1.04 | 1.5E-04 | 3.1E-02 |       4.7E-02  OK|
 | P-Mass               | 1.08 | 2.4E-05 | 1.9E-02 | 13.2  7.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.03 | 1.3E-04 | 2.2E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.2E-04 | 3.5E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 0.97 | 1.5E-04 | 1.0E-02 | 11.6  4.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  218                    CPU SECONDS = 1.999E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 1.0E-02 |       3.1E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 5.0E-02 |       3.6E-02  OK|
 | W-Mom                | 1.05 | 1.6E-04 | 3.6E-02 |       4.8E-02  OK|
 | P-Mass               | 0.84 | 2.0E-05 | 2.6E-03 | 13.2  7.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.05 | 1.4E-04 | 2.4E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 5.4E-04 | 3.9E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 1.02 | 1.6E-04 | 1.0E-02 | 11.6  4.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  219                    CPU SECONDS = 2.007E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.2E-04 | 1.0E-02 |       3.1E-02  OK|
 | V-Mom                | 0.99 | 1.3E-04 | 4.2E-02 |       3.5E-02  OK|
 | W-Mom                | 1.06 | 1.7E-04 | 3.3E-02 |       4.8E-02  OK|
 | P-Mass               | 0.98 | 2.0E-05 | 2.3E-03 | 13.2  7.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.06 | 1.5E-04 | 2.6E-02 |  5.7  7.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.3E-04 | 3.8E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 1.03 | 1.6E-04 | 1.4E-02 | 11.6  4.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  220                    CPU SECONDS = 2.016E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.3E-04 | 1.1E-02 |       3.1E-02  OK|
 | V-Mom                | 0.99 | 1.3E-04 | 3.0E-02 |       3.3E-02  OK|
 | W-Mom                | 1.07 | 1.8E-04 | 2.6E-02 |       4.7E-02  OK|
 | P-Mass               | 0.99 | 1.9E-05 | 2.0E-03 | 13.2  7.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.06 | 1.6E-04 | 2.8E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 5.2E-04 | 4.1E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 1.03 | 1.7E-04 | 2.3E-02 | 11.6  5.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  221                    CPU SECONDS = 2.025E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.3E-04 | 1.0E-02 |       3.2E-02  OK|
 | V-Mom                | 1.02 | 1.4E-04 | 1.8E-02 |       3.2E-02  OK|
 | W-Mom                | 1.07 | 1.9E-04 | 2.4E-02 |       4.5E-02  OK|
 | P-Mass               | 1.07 | 2.1E-05 | 1.1E-02 | 13.2  7.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.06 | 1.7E-04 | 2.6E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.2E-04 | 4.0E-02 |  5.7  4.8E-02  OK|
 | O-TurbFreq           | 0.98 | 1.6E-04 | 1.6E-02 | 11.6  6.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  222                    CPU SECONDS = 2.034E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.3E-04 | 1.0E-02 |       3.2E-02  OK|
 | V-Mom                | 1.04 | 1.4E-04 | 2.5E-02 |       3.1E-02  OK|
 | W-Mom                | 1.06 | 2.1E-04 | 2.7E-02 |       4.3E-02  OK|
 | P-Mass               | 0.96 | 2.0E-05 | 2.7E-03 | 13.2  7.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.7E-04 | 2.0E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 5.3E-04 | 3.8E-02 |  5.7  5.0E-02  OK|
 | O-TurbFreq           | 1.03 | 1.7E-04 | 1.1E-02 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  223                    CPU SECONDS = 2.043E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.3E-04 | 9.5E-03 |       3.0E-02  OK|
 | V-Mom                | 1.02 | 1.4E-04 | 2.4E-02 |       3.1E-02  OK|
 | W-Mom                | 1.02 | 2.1E-04 | 2.6E-02 |       4.1E-02  OK|
 | P-Mass               | 1.06 | 2.1E-05 | 3.2E-03 | 13.2  7.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.7E-04 | 2.3E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 5.4E-04 | 3.5E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 1.06 | 1.8E-04 | 1.4E-02 | 11.6  6.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  224                    CPU SECONDS = 2.052E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.4E-04 | 9.9E-03 |       2.7E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 2.6E-02 |       3.0E-02  OK|
 | W-Mom                | 0.97 | 2.0E-04 | 2.4E-02 |       3.7E-02  OK|
 | P-Mass               | 1.07 | 2.2E-05 | 2.8E-03 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.7E-04 | 3.1E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.4E-04 | 3.6E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 1.00 | 1.8E-04 | 1.3E-02 | 11.6  6.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  225                    CPU SECONDS = 2.061E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.4E-04 | 1.0E-02 |       2.5E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 2.5E-02 |       2.8E-02  OK|
 | W-Mom                | 0.94 | 1.9E-04 | 2.3E-02 |       3.5E-02  OK|
 | P-Mass               | 1.11 | 2.5E-05 | 1.2E-02 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.3% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.7E-04 | 2.4E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 5.3E-04 | 3.7E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.97 | 1.7E-04 | 1.4E-02 | 11.6  6.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  226                    CPU SECONDS = 2.069E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.4E-04 | 1.0E-02 |       2.4E-02  OK|
 | V-Mom                | 1.01 | 1.4E-04 | 3.2E-02 |       2.7E-02  OK|
 | W-Mom                | 0.93 | 1.8E-04 | 2.2E-02 |       3.4E-02  OK|
 | P-Mass               | 1.02 | 2.5E-05 | 3.6E-03 | 13.2  5.7E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.6E-04 | 2.0E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 5.1E-04 | 3.9E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.97 | 1.7E-04 | 1.5E-02 | 11.6  6.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  227                    CPU SECONDS = 2.079E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.99 | 1.4E-04 | 1.1E-02 |       2.4E-02  OK|
 | V-Mom                | 1.03 | 1.5E-04 | 4.8E-02 |       2.7E-02  OK|
 | W-Mom                | 0.96 | 1.7E-04 | 3.3E-02 |       3.2E-02  OK|
 | P-Mass               | 1.06 | 2.7E-05 | 1.2E-02 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.6E-04 | 2.1E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 5.0E-04 | 4.1E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.98 | 1.6E-04 | 1.2E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  228                    CPU SECONDS = 2.087E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.3E-04 | 1.1E-02 |       2.5E-02  OK|
 | V-Mom                | 1.01 | 1.5E-04 | 5.3E-02 |       2.8E-02  OK|
 | W-Mom                | 0.98 | 1.7E-04 | 3.9E-02 |       3.0E-02  OK|
 | P-Mass               | 1.00 | 2.7E-05 | 3.9E-03 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.4% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 1.5E-04 | 2.2E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.1E-04 | 4.1E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.97 | 1.6E-04 | 1.2E-02 | 11.6  7.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  229                    CPU SECONDS = 2.096E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.3E-04 | 9.7E-03 |       2.6E-02  OK|
 | V-Mom                | 0.98 | 1.5E-04 | 4.4E-02 |       2.8E-02  OK|
 | W-Mom                | 0.98 | 1.6E-04 | 3.6E-02 |       2.9E-02  OK|
 | P-Mass               | 1.02 | 2.7E-05 | 4.1E-03 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.94 | 1.4E-04 | 2.1E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 5.2E-04 | 3.6E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 0.97 | 1.5E-04 | 1.4E-02 | 11.6  7.3E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  230                    CPU SECONDS = 2.105E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.3E-04 | 9.6E-03 |       2.6E-02  OK|
 | V-Mom                | 0.96 | 1.4E-04 | 3.1E-02 |       2.7E-02  OK|
 | W-Mom                | 0.97 | 1.6E-04 | 2.8E-02 |       3.1E-02  OK|
 | P-Mass               | 1.01 | 2.8E-05 | 4.2E-03 | 13.2  5.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.93 | 1.3E-04 | 1.9E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.96 | 5.0E-04 | 3.9E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.01 | 1.6E-04 | 2.7E-02 | 11.6  7.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  231                    CPU SECONDS = 2.114E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.3E-04 | 9.3E-03 |       2.7E-02  OK|
 | V-Mom                | 0.97 | 1.4E-04 | 1.8E-02 |       2.6E-02  OK|
 | W-Mom                | 0.97 | 1.5E-04 | 2.6E-02 |       3.2E-02  OK|
 | P-Mass               | 1.07 | 3.0E-05 | 2.3E-02 | 13.2  5.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.7% of the faces,   8.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.93 | 1.2E-04 | 1.6E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.95 | 4.8E-04 | 3.6E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 2.6E-02 | 11.6  6.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  232                    CPU SECONDS = 2.123E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 8.9E-03 |       2.7E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.5E-02 |       2.6E-02  OK|
 | W-Mom                | 0.99 | 1.5E-04 | 2.5E-02 |       3.1E-02  OK|
 | P-Mass               | 0.93 | 2.7E-05 | 4.3E-03 | 13.2  5.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.95 | 1.2E-04 | 1.4E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.94 | 4.5E-04 | 3.9E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.98 | 1.5E-04 | 1.2E-02 | 11.6  6.6E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  233                    CPU SECONDS = 2.131E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 8.2E-03 |       2.6E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 2.5E-02 |       2.6E-02  OK|
 | W-Mom                | 1.00 | 1.5E-04 | 2.5E-02 |       3.1E-02  OK|
 | P-Mass               | 1.01 | 2.8E-05 | 8.5E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.1E-04 | 1.2E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 4.4E-04 | 4.0E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 1.05 | 1.6E-04 | 1.2E-02 | 11.6  6.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  234                    CPU SECONDS = 2.140E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 7.1E-03 |       2.5E-02  OK|
 | V-Mom                | 0.97 | 1.3E-04 | 2.3E-02 |       2.7E-02  OK|
 | W-Mom                | 0.96 | 1.5E-04 | 2.2E-02 |       3.1E-02  OK|
 | P-Mass               | 0.97 | 2.7E-05 | 4.1E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.96 | 1.1E-04 | 1.3E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.3E-04 | 3.8E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.99 | 1.6E-04 | 1.5E-02 | 11.6  6.2E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  235                    CPU SECONDS = 2.148E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.2E-04 | 8.3E-03 |       2.6E-02  OK|
 | V-Mom                | 0.97 | 1.3E-04 | 2.2E-02 |       2.7E-02  OK|
 | W-Mom                | 0.95 | 1.4E-04 | 1.6E-02 |       3.1E-02  OK|
 | P-Mass               | 0.99 | 2.6E-05 | 4.9E-03 | 13.2  5.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.97 | 1.0E-04 | 1.1E-02 |  5.7  8.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.00 | 4.3E-04 | 4.1E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.96 | 1.5E-04 | 1.5E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  236                    CPU SECONDS = 2.157E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.1E-04 | 8.5E-03 |       2.7E-02  OK|
 | V-Mom                | 1.02 | 1.3E-04 | 4.0E-02 |       2.6E-02  OK|
 | W-Mom                | 0.97 | 1.3E-04 | 2.9E-02 |       3.3E-02  OK|
 | P-Mass               | 0.96 | 2.5E-05 | 3.7E-03 | 13.2  5.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.0E-04 | 1.2E-02 |  5.7  8.3E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 4.3E-04 | 3.7E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 1.5E-02 | 11.6  5.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  237                    CPU SECONDS = 2.166E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.96 | 1.1E-04 | 8.2E-03 |       2.8E-02  OK|
 | V-Mom                | 1.05 | 1.4E-04 | 5.8E-02 |       2.6E-02  OK|
 | W-Mom                | 1.00 | 1.3E-04 | 4.0E-02 |       3.4E-02  OK|
 | P-Mass               | 0.94 | 2.4E-05 | 3.4E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.0E-04 | 1.7E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 4.2E-04 | 3.4E-02 |  5.7  5.2E-02  OK|
 | O-TurbFreq           | 0.99 | 1.5E-04 | 1.2E-02 | 11.6  5.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  238                    CPU SECONDS = 2.175E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.95 | 1.0E-04 | 8.6E-03 |       2.9E-02  OK|
 | V-Mom                | 1.00 | 1.4E-04 | 5.6E-02 |       2.7E-02  OK|
 | W-Mom                | 1.01 | 1.3E-04 | 4.3E-02 |       3.3E-02  OK|
 | P-Mass               | 0.95 | 2.3E-05 | 7.6E-03 | 13.2  6.0E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.0E-04 | 1.7E-02 |  5.7  8.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.98 | 4.1E-04 | 3.2E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 0.95 | 1.4E-04 | 8.2E-03 | 11.6  5.8E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  239                    CPU SECONDS = 2.184E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.98 | 1.0E-04 | 7.1E-03 |       2.8E-02  OK|
 | V-Mom                | 0.94 | 1.3E-04 | 4.4E-02 |       2.6E-02  OK|
 | W-Mom                | 0.97 | 1.3E-04 | 3.6E-02 |       3.3E-02  OK|
 | P-Mass               | 0.92 | 2.1E-05 | 3.6E-03 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.05 | 1.1E-04 | 1.3E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 4.2E-04 | 2.9E-02 |  5.7  5.4E-02  OK|
 | O-TurbFreq           | 0.94 | 1.3E-04 | 1.0E-02 | 11.6  5.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  240                    CPU SECONDS = 2.192E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.1E-04 | 8.6E-03 |       2.7E-02  OK|
 | V-Mom                | 0.94 | 1.2E-04 | 2.9E-02 |       2.5E-02  OK|
 | W-Mom                | 0.96 | 1.3E-04 | 2.6E-02 |       3.4E-02  OK|
 | P-Mass               | 0.95 | 2.0E-05 | 2.5E-03 | 13.2  6.2E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.04 | 1.1E-04 | 1.6E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 4.4E-04 | 3.2E-02 |  5.7  5.3E-02  OK|
 | O-TurbFreq           | 1.04 | 1.4E-04 | 2.5E-02 | 11.6  5.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  241                    CPU SECONDS = 2.201E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.1E-04 | 9.6E-03 |       2.8E-02  OK|
 | V-Mom                | 0.99 | 1.2E-04 | 2.2E-02 |       2.5E-02  OK|
 | W-Mom                | 0.99 | 1.2E-04 | 2.1E-02 |       3.4E-02  OK|
 | P-Mass               | 0.99 | 2.0E-05 | 5.4E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.1E-04 | 1.6E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.02 | 4.5E-04 | 3.8E-02 |  5.7  5.1E-02  OK|
 | O-TurbFreq           | 1.05 | 1.5E-04 | 3.0E-02 | 11.6  5.4E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  242                    CPU SECONDS = 2.210E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.02 | 1.1E-04 | 9.1E-03 |       2.8E-02  OK|
 | V-Mom                | 1.07 | 1.3E-04 | 2.6E-02 |       2.5E-02  OK|
 | W-Mom                | 1.05 | 1.3E-04 | 2.5E-02 |       3.4E-02  OK|
 | P-Mass               | 1.00 | 2.0E-05 | 1.8E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.1E-04 | 1.8E-02 |  5.7  7.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.01 | 4.6E-04 | 3.8E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 0.97 | 1.4E-04 | 1.3E-02 | 11.6  5.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  243                    CPU SECONDS = 2.219E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.01 | 1.1E-04 | 8.6E-03 |       2.8E-02  OK|
 | V-Mom                | 1.06 | 1.4E-04 | 2.8E-02 |       2.7E-02  OK|
 | W-Mom                | 1.08 | 1.4E-04 | 2.9E-02 |       3.4E-02  OK|
 | P-Mass               | 1.03 | 2.0E-05 | 1.9E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.4% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.1E-04 | 1.4E-02 |  5.7  8.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.03 | 4.7E-04 | 6.0E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.05 | 1.5E-04 | 1.3E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  244                    CPU SECONDS = 2.228E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 9.2E-03 |       2.8E-02  OK|
 | V-Mom                | 0.99 | 1.4E-04 | 2.9E-02 |       2.8E-02  OK|
 | W-Mom                | 1.02 | 1.4E-04 | 2.5E-02 |       3.5E-02  OK|
 | P-Mass               | 1.01 | 2.0E-05 | 3.6E-03 | 13.2  6.4E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.1E-04 | 1.5E-02 |  5.7  8.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.07 | 5.0E-04 | 7.0E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.00 | 1.5E-04 | 1.5E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  245                    CPU SECONDS = 2.237E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 8.7E-03 |       2.8E-02  OK|
 | V-Mom                | 0.96 | 1.3E-04 | 2.7E-02 |       2.8E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 4.0E-02 |       3.7E-02  OK|
 | P-Mass               | 1.03 | 2.1E-05 | 7.3E-03 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.98 | 1.1E-04 | 1.4E-02 |  5.7  8.4E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.08 | 5.4E-04 | 8.0E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 0.96 | 1.4E-04 | 1.3E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  246                    CPU SECONDS = 2.245E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 1.0E-02 |       2.8E-02  OK|
 | V-Mom                | 0.97 | 1.3E-04 | 2.3E-02 |       2.7E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 4.3E-02 |       4.0E-02  OK|
 | P-Mass               | 1.02 | 2.1E-05 | 7.9E-03 | 13.2  6.5E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.99 | 1.0E-04 | 1.2E-02 |  5.7  8.5E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.05 | 5.7E-04 | 7.5E-02 |  5.7  4.5E-02  OK|
 | O-TurbFreq           | 1.01 | 1.4E-04 | 1.2E-02 | 11.6  6.1E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  247                    CPU SECONDS = 2.254E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 1.2E-02 |       2.8E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 3.7E-02 |       2.7E-02  OK|
 | W-Mom                | 0.99 | 1.4E-04 | 2.6E-02 |       4.1E-02  OK|
 | P-Mass               | 1.00 | 2.1E-05 | 4.4E-03 | 13.2  6.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.0E-04 | 1.2E-02 |  5.7  8.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.97 | 5.5E-04 | 5.8E-02 |  5.7  4.6E-02  OK|
 | O-TurbFreq           | 1.04 | 1.5E-04 | 9.9E-03 | 11.6  6.5E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  248                    CPU SECONDS = 2.265E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.00 | 1.1E-04 | 1.3E-02 |       2.8E-02  OK|
 | V-Mom                | 1.02 | 1.3E-04 | 4.7E-02 |       2.6E-02  OK|
 | W-Mom                | 1.02 | 1.4E-04 | 3.9E-02 |       3.9E-02  OK|
 | P-Mass               | 1.04 | 2.2E-05 | 7.2E-03 | 13.2  6.6E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.1E-04 | 1.4E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.93 | 5.2E-04 | 3.5E-02 |  5.7  4.7E-02  OK|
 | O-TurbFreq           | 1.01 | 1.5E-04 | 1.0E-02 | 11.6  7.0E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  249                    CPU SECONDS = 2.274E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.03 | 1.2E-04 | 1.1E-02 |       2.9E-02  OK|
 | V-Mom                | 1.01 | 1.3E-04 | 4.7E-02 |       2.6E-02  OK|
 | W-Mom                | 1.01 | 1.4E-04 | 3.2E-02 |       3.6E-02  OK|
 | P-Mass               | 1.08 | 2.4E-05 | 1.3E-02 | 13.2  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.01 | 1.1E-04 | 1.5E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.99 | 5.1E-04 | 3.4E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 1.01 | 1.5E-04 | 1.1E-02 | 11.6  7.7E-04  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =  250                    CPU SECONDS = 2.283E+05
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.04 | 1.2E-04 | 1.1E-02 |       2.9E-02  OK|
 | V-Mom                | 1.00 | 1.3E-04 | 3.8E-02 |       2.7E-02  OK|
 | W-Mom                | 1.02 | 1.4E-04 | 3.7E-02 |       3.5E-02  OK|
 | P-Mass               | 1.06 | 2.5E-05 | 1.3E-02 | 13.2  6.1E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  11.6% of the faces,   8.0% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at   1.5% of the faces,   0.5% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Fluid 1.                                       |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 1.00 | 1.1E-04 | 1.7E-02 |  5.7  8.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 1.06 | 5.4E-04 | 4.6E-02 |  5.7  4.9E-02  OK|
 | O-TurbFreq           | 1.03 | 1.6E-04 | 1.9E-02 | 11.6  7.9E-04  OK|
 +----------------------+------+---------+---------+------------------+

Execution terminating: STP file found.

CFD Solver finished: Thu Jul 11 21:51:34 2024
 CFD Solver wall clock seconds: 3.8103E+04

======================================================================
              Termination and Interrupt Condition Summary
 ======================================================================
    
 CFD Solver: Stop instruction received

======================================================================
              Boundary Flow and Total Source Term Summary
 ======================================================================

+--------------------------------------------------------------------+
 |                              U-Mom-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Blade                                1.0430E+01
 Boundary         : R1 Hub                                  8.7829E+01
 Boundary         : R1 Inlet                                6.9878E-04
 Boundary         : R1 Shroud                              -1.6871E+02
 Boundary         : Periodic                                8.0982E+01
 Domain Src (Neg) : R1                                     -4.2481E-01
 Domain Src (Pos) : R1                                      3.4812E+01
 Domain Interface : S1 to R1 (Side 2)                      -4.5031E+01
                                                           -----------
 Domain Imbalance :                                        -1.1457E-01

+--------------------------------------------------------------------+
 |                              V-Mom-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Blade                                1.0972E+02
 Boundary         : R1 Hub                                 -1.2717E+01
 Boundary         : R1 Inlet                                3.2591E-03
 Boundary         : R1 Shroud                               1.6896E+01
 Boundary         : Periodic                               -4.9134E+00
 Domain Src (Neg) : R1                                     -1.3694E+01
 Domain Src (Pos) : R1                                      1.5062E+00
 Domain Interface : S1 to R1 (Side 2)                      -9.6632E+01
                                                           -----------
 Domain Imbalance :                                         1.6573E-01

+--------------------------------------------------------------------+
 |                              W-Mom-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Blade                                4.5933E+01
 Boundary         : R1 Hub                                 -2.2987E+01
 Boundary         : R1 Inlet                                3.8157E+02
 Boundary         : R1 Shroud                              -1.5692E-01
 Boundary         : Periodic                                2.0322E-12
 Domain Interface : S1 to R1 (Side 2)                      -4.0448E+02
                                                           -----------
 Domain Imbalance :                                        -1.1902E-01

+--------------------------------------------------------------------+
 |                             P-Mass-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Inlet                                6.0962E-01
 Domain Interface : S1 to R1 (Side 2)                      -6.0961E-01
                                                           -----------
 Domain Imbalance :                                         7.3863E-06

+--------------------------------------------------------------------+
 |                              U-Mom-S1                              |
 +--------------------------------------------------------------------+
 Boundary         : S1 Blade                               -7.6045E+00
 Boundary         : S1 Hub                                  7.2377E+01
 Boundary         : S1 Shroud                              -1.6918E+02
 Boundary         : Periodic                                7.9405E+01
 Domain Interface : S1 to R1 (Side 1)                       2.3315E+01
 Domain Interface : R2 to S1 (Side 2)                       1.8961E+00
                                                           -----------
 Domain Imbalance :                                         2.1149E-01

+--------------------------------------------------------------------+
 |                              V-Mom-S1                              |
 +--------------------------------------------------------------------+
 Boundary         : S1 Blade                               -6.3148E+01
 Boundary         : S1 Hub                                  1.3445E+01
 Boundary         : S1 Shroud                              -1.0359E+01
 Boundary         : Periodic                               -8.3852E+00
 Domain Interface : S1 to R1 (Side 1)                       1.1375E+02
 Domain Interface : R2 to S1 (Side 2)                      -4.5579E+01
                                                           -----------
 Domain Imbalance :                                        -2.7674E-01

+--------------------------------------------------------------------+
 |                              W-Mom-S1                              |
 +--------------------------------------------------------------------+
 Boundary         : S1 Blade                               -1.0779E+01
 Boundary         : S1 Hub                                 -1.9408E+01
 Boundary         : S1 Shroud                              -3.1555E-01
 Boundary         : Periodic                                2.7001E-13
 Domain Interface : S1 to R1 (Side 1)                       4.1271E+02
 Domain Interface : R2 to S1 (Side 2)                      -3.8237E+02
                                                           -----------
 Domain Imbalance :                                        -1.6200E-01

+--------------------------------------------------------------------+
 |                             P-Mass-S1                              |
 +--------------------------------------------------------------------+
 Domain Interface : S1 to R1 (Side 1)                       6.0961E-01
 Domain Interface : R2 to S1 (Side 2)                      -6.0961E-01
                                                           -----------
 Domain Imbalance :                                        -1.0477E-06

+--------------------------------------------------------------------+
 |                              U-Mom-R2                              |
 +--------------------------------------------------------------------+
 Boundary         : R2 Blade                                7.7967E+00
 Boundary         : R2 Hub                                  9.0302E+01
 Boundary         : R2 Shroud                              -1.6393E+02
 Boundary         : Periodic                                5.9564E+01
 Domain Src (Neg) : R2                                     -3.7818E-01
 Domain Src (Pos) : R2                                      3.3787E+01
 Domain Interface : R2 to S1 (Side 1)                       4.2529E+00
 Domain Interface : S2 to R2 (Side 2)                      -3.1278E+01
                                                           -----------
 Domain Imbalance :                                         1.1915E-01

+--------------------------------------------------------------------+
 |                              V-Mom-R2                              |
 +--------------------------------------------------------------------+
 Boundary         : R2 Blade                                9.5513E+01
 Boundary         : R2 Hub                                 -9.1923E+00
 Boundary         : R2 Shroud                               1.2822E+01
 Boundary         : Periodic                               -2.9758E+00
 Domain Src (Neg) : R2                                     -7.1468E+00
 Domain Src (Pos) : R2                                      2.0051E+00
 Domain Interface : R2 to S1 (Side 1)                       3.7957E+01
 Domain Interface : S2 to R2 (Side 2)                      -1.2839E+02
                                                           -----------
 Domain Imbalance :                                         5.9334E-01

+--------------------------------------------------------------------+
 |                              W-Mom-R2                              |
 +--------------------------------------------------------------------+
 Boundary         : R2 Blade                                1.3842E+01
 Boundary         : R2 Hub                                 -1.8486E+01
 Boundary         : R2 Shroud                              -2.3604E-01
 Boundary         : Periodic                               -1.0303E-12
 Domain Interface : R2 to S1 (Side 1)                       3.5258E+02
 Domain Interface : S2 to R2 (Side 2)                      -3.4769E+02
                                                           -----------
 Domain Imbalance :                                         5.4030E-03

+--------------------------------------------------------------------+
 |                             P-Mass-R2                              |
 +--------------------------------------------------------------------+
 Domain Interface : R2 to S1 (Side 1)                       5.5660E-01
 Domain Interface : S2 to R2 (Side 2)                      -5.5661E-01
                                                           -----------
 Domain Imbalance :                                        -5.8027E-06

+--------------------------------------------------------------------+
 |                              U-Mom-S2                              |
 +--------------------------------------------------------------------+
 Boundary         : S2 Blade                               -5.8160E+00
 Boundary         : S2 Hub                                  1.1951E+02
 Boundary         : S2 Shroud                              -1.9958E+02
 Boundary         : Periodic                                7.7719E+01
 Domain Interface : S2 to R2 (Side 1)                       7.4501E+00
 Domain Interface : R3 to S2 (Side 2)                       3.6294E-01
                                                           -----------
 Domain Imbalance :                                        -3.5550E-01

+--------------------------------------------------------------------+
 |                              V-Mom-S2                              |
 +--------------------------------------------------------------------+
 Boundary         : S2 Blade                               -1.0062E+02
 Boundary         : S2 Hub                                  1.3263E+01
 Boundary         : S2 Shroud                              -1.0605E+01
 Boundary         : Periodic                               -4.6951E+00
 Domain Interface : S2 to R2 (Side 1)                       1.3317E+02
 Domain Interface : R3 to S2 (Side 2)                      -3.0404E+01
                                                           -----------
 Domain Imbalance :                                         1.1435E-01

+--------------------------------------------------------------------+
 |                              W-Mom-S2                              |
 +--------------------------------------------------------------------+
 Boundary         : S2 Blade                                4.5816E+01
 Boundary         : S2 Hub                                 -2.0294E+01
 Boundary         : S2 Shroud                              -4.0154E-01
 Boundary         : Periodic                                6.6080E-13
 Domain Interface : S2 to R2 (Side 1)                       3.4945E+02
 Domain Interface : R3 to S2 (Side 2)                      -3.7458E+02
                                                           -----------
 Domain Imbalance :                                        -6.7581E-03

+--------------------------------------------------------------------+
 |                             P-Mass-S2                              |
 +--------------------------------------------------------------------+
 Domain Interface : S2 to R2 (Side 1)                       5.5661E-01
 Domain Interface : R3 to S2 (Side 2)                      -5.5661E-01
                                                           -----------
 Domain Imbalance :                                        -4.6058E-06

+--------------------------------------------------------------------+
 |                              U-Mom-R3                              |
 +--------------------------------------------------------------------+
 Boundary         : R3 Blade                                1.9331E+01
 Boundary         : R3 Hub                                  1.3321E+02
 Boundary         : R3 Shroud                              -2.3250E+02
 Boundary         : Periodic                                6.6390E+01
 Domain Src (Neg) : R3                                     -1.6812E-01
 Domain Src (Pos) : R3                                      3.8505E+01
 Domain Interface : R3 to S2 (Side 1)                       2.2277E+00
 Domain Interface : S3 to R3 (Side 2)                      -2.6985E+01
                                                           -----------
 Domain Imbalance :                                         9.2294E-03

+--------------------------------------------------------------------+
 |                              V-Mom-R3                              |
 +--------------------------------------------------------------------+
 Boundary         : R3 Blade                                1.6599E+02
 Boundary         : R3 Hub                                 -5.0558E+00
 Boundary         : R3 Shroud                               1.2722E+01
 Boundary         : Periodic                               -6.5187E+00
 Domain Src (Neg) : R3                                     -4.8859E+00
 Domain Src (Pos) : R3                                      1.4258E+00
 Domain Interface : R3 to S2 (Side 1)                       2.6514E+01
 Domain Interface : S3 to R3 (Side 2)                      -1.9007E+02
                                                           -----------
 Domain Imbalance :                                         1.2076E-01

+--------------------------------------------------------------------+
 |                              W-Mom-R3                              |
 +--------------------------------------------------------------------+
 Boundary         : R3 Blade                                1.8182E+01
 Boundary         : R3 Hub                                 -2.0156E+01
 Boundary         : R3 Shroud                              -1.0164E-01
 Boundary         : Periodic                               -6.3949E-14
 Domain Interface : R3 to S2 (Side 1)                       3.5114E+02
 Domain Interface : S3 to R3 (Side 2)                      -3.4906E+02
                                                           -----------
 Domain Imbalance :                                         5.3408E-03

+--------------------------------------------------------------------+
 |                             P-Mass-R3                              |
 +--------------------------------------------------------------------+
 Domain Interface : R3 to S2 (Side 1)                       5.2000E-01
 Domain Interface : S3 to R3 (Side 2)                      -5.2000E-01
                                                           -----------
 Domain Imbalance :                                         4.7573E-06

+--------------------------------------------------------------------+
 |                              U-Mom-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Blade                                8.3983E+00
 Boundary         : S3 Hub                                  1.8581E+02
 Boundary         : S3 Outlet                               1.1766E+00
 Boundary         : S3 Shroud                              -2.9927E+02
 Boundary         : Periodic                                9.3973E+01
 Domain Interface : S3 to R3 (Side 1)                       1.0110E+01
                                                           -----------
 Domain Imbalance :                                         1.9500E-01

+--------------------------------------------------------------------+
 |                              V-Mom-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Blade                               -2.5336E+02
 Boundary         : S3 Hub                                  6.4553E+00
 Boundary         : S3 Outlet                               5.8528E+01
 Boundary         : S3 Shroud                              -8.2240E+00
 Boundary         : Periodic                               -1.6219E-01
 Domain Interface : S3 to R3 (Side 1)                       1.9683E+02
                                                           -----------
 Domain Imbalance :                                         6.8656E-02

+--------------------------------------------------------------------+
 |                              W-Mom-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Blade                                8.7195E+01
 Boundary         : S3 Hub                                 -1.3491E+01
 Boundary         : S3 Outlet                              -4.2636E+02
 Boundary         : S3 Shroud                              -4.9943E-01
 Boundary         : Periodic                                2.1885E-12
 Domain Interface : S3 to R3 (Side 1)                       3.5309E+02
                                                           -----------
 Domain Imbalance :                                        -6.5881E-02

+--------------------------------------------------------------------+
 |                             P-Mass-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Outlet                              -5.1998E-01
 Domain Interface : S3 to R3 (Side 1)                       5.2000E-01
                                                           -----------
 Domain Imbalance :                                         1.5477E-05

+--------------------------------------------------------------------+
 |                            H-Energy-R1                             |
 +--------------------------------------------------------------------+
 Boundary         : R1 Inlet                               -6.2209E+03
 Bnd Src/Visc Work: R1 Inlet                               -3.1179E-02
 Bnd Src/Visc Work: S1 to R1 Side 2                         2.7370E+02
 Domain Src (Neg) : R1                                     -1.2540E+04
 Domain Src (Pos) : R1                                      1.2540E+04
 Domain Interface : S1 to R1 (Side 2)                       5.9576E+03
                                                           -----------
 Domain Imbalance :                                         1.0403E+01

+--------------------------------------------------------------------+
 |                            H-Energy-S1                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R2 to S1 Side 2                         1.1931E+02
 Bnd Src/Visc Work: S1 to R1 Side 1                         6.7407E+01
 Domain Src (Neg) : S1                                     -1.7069E+04
 Domain Src (Pos) : S1                                      1.7069E+04
 Domain Interface : S1 to R1 (Side 1)                       2.2347E+04
 Domain Interface : R2 to S1 (Side 2)                      -2.2686E+04
                                                           -----------
 Domain Imbalance :                                        -1.5249E+02

+--------------------------------------------------------------------+
 |                            H-Energy-R2                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R2 to S1 Side 1                         3.6108E+01
 Bnd Src/Visc Work: S2 to R2 Side 2                         1.3669E+02
 Domain Src (Neg) : R2                                     -2.3714E+04
 Domain Src (Pos) : R2                                      2.3714E+04
 Domain Interface : R2 to S1 (Side 1)                       9.8689E+03
 Domain Interface : S2 to R2 (Side 2)                      -1.0248E+04
                                                           -----------
 Domain Imbalance :                                        -2.0592E+02

+--------------------------------------------------------------------+
 |                            H-Energy-S2                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R3 to S2 Side 2                         3.3283E+01
 Bnd Src/Visc Work: S2 to R2 Side 1                         1.4549E+02
 Domain Src (Neg) : S2                                     -2.1844E+04
 Domain Src (Pos) : S2                                      2.1844E+04
 Domain Interface : S2 to R2 (Side 1)                       4.7527E+04
 Domain Interface : R3 to S2 (Side 2)                      -4.7802E+04
                                                           -----------
 Domain Imbalance :                                        -9.6126E+01

+--------------------------------------------------------------------+
 |                            H-Energy-R3                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R3 to S2 Side 1                         3.2427E+01
 Bnd Src/Visc Work: S3 to R3 Side 2                         1.1341E+02
 Domain Src (Neg) : R3                                     -2.7445E+04
 Domain Src (Pos) : R3                                      2.7445E+04
 Domain Interface : R3 to S2 (Side 1)                       3.6795E+04
 Domain Interface : S3 to R3 (Side 2)                      -3.7032E+04
                                                           -----------
 Domain Imbalance :                                        -9.1494E+01

+--------------------------------------------------------------------+
 |                            H-Energy-S3                             |
 +--------------------------------------------------------------------+
 Boundary         : S3 Outlet                              -9.2006E+04
 Bnd Src/Visc Work: S3 Outlet                              -3.9031E-03
 Bnd Src/Visc Work: S3 to R3 Side 1                         4.1485E+02
 Domain Src (Neg) : S3                                     -3.4122E+04
 Domain Src (Pos) : S3                                      3.4122E+04
 Domain Interface : S3 to R3 (Side 1)                       9.1742E+04
                                                           -----------
 Domain Imbalance :                                         1.5125E+02

+--------------------------------------------------------------------+
 |                     Normalised Imbalance Summary                   |
 +--------------------------------------------------------------------+
 |       Equation       |      Maximum Flow     |     Imbalance (%)   |
 +--------------------------------------------------------------------+
 | U-Mom-R1             |       4.2636E+02      |       -0.0269       |
 | V-Mom-R1             |       4.2636E+02      |        0.0389       |
 | W-Mom-R1             |       4.2636E+02      |       -0.0279       |
 | P-Mass-R1            |       6.0962E-01      |        0.0012       |
 | U-Mom-S1             |       4.2636E+02      |        0.0496       |
 | V-Mom-S1             |       4.2636E+02      |       -0.0649       |
 | W-Mom-S1             |       4.2636E+02      |       -0.0380       |
 | P-Mass-S1            |       6.0962E-01      |       -0.0002       |
 | U-Mom-R2             |       4.2636E+02      |        0.0279       |
 | V-Mom-R2             |       4.2636E+02      |        0.1392       |
 | W-Mom-R2             |       4.2636E+02      |        0.0013       |
 | P-Mass-R2            |       6.0962E-01      |       -0.0010       |
 | U-Mom-S2             |       4.2636E+02      |       -0.0834       |
 | V-Mom-S2             |       4.2636E+02      |        0.0268       |
 | W-Mom-S2             |       4.2636E+02      |       -0.0016       |
 | P-Mass-S2            |       6.0962E-01      |       -0.0008       |
 | U-Mom-R3             |       4.2636E+02      |        0.0022       |
 | V-Mom-R3             |       4.2636E+02      |        0.0283       |
 | W-Mom-R3             |       4.2636E+02      |        0.0013       |
 | P-Mass-R3            |       6.0962E-01      |        0.0008       |
 | U-Mom-S3             |       4.2636E+02      |        0.0457       |
 | V-Mom-S3             |       4.2636E+02      |        0.0161       |
 | W-Mom-S3             |       4.2636E+02      |       -0.0155       |
 | P-Mass-S3            |       6.0962E-01      |        0.0025       |
 +----------------------+-----------------------+---------------------+
 | H-Energy-R1          |       9.2006E+04      |        0.0113       |
 | H-Energy-S1          |       9.2006E+04      |       -0.1657       |
 | H-Energy-R2          |       9.2006E+04      |       -0.2238       |
 | H-Energy-S2          |       9.2006E+04      |       -0.1045       |
 | H-Energy-R3          |       9.2006E+04      |       -0.0994       |
 | H-Energy-S3          |       9.2006E+04      |        0.1644       |
 +----------------------+-----------------------+---------------------+

======================================================================
                     Wall Force and Moment Summary
 ======================================================================
                                                                          
 Notes:
 1. Pressure integrals exclude the reference pressure.  To include
    it, set the expert parameter 'include pref in forces = t'.
 2. These quantities are evaluated in a reference frame fixed to
    the initial domain orientation and are not rotated if the orientation
    changes (e.g. transient run or specified rotational offset).

+--------------------------------------------------------------------+
 |                      Pressure Force On Walls                       |
 +--------------------------------------------------------------------+
                                    X-Comp.      Y-Comp.      Z-Comp.

Domain Group: R1

R1 Blade                        -1.1023E+01  -1.0909E+02  -4.6507E+01
 R1 Hub                          -8.7836E+01   1.2733E+01   2.2953E+01
 R1 Shroud                        1.6873E+02  -1.6817E+01   3.0002E-04
 S1 Blade                         8.0743E+00   6.2570E+01   9.8082E+00
 S1 Hub                          -7.2408E+01  -1.3335E+01   1.9351E+01
 S1 Shroud                        1.6920E+02   9.9490E+00   1.8354E-04
 R2 Blade                        -8.2014E+00  -9.5020E+01  -1.4753E+01
 R2 Hub                          -9.0317E+01   9.2176E+00   1.8423E+01
 R2 Shroud                        1.6392E+02  -1.2992E+01   2.2556E-04
 S2 Blade                         5.9623E+00   9.9977E+01  -4.6851E+01
 S2 Hub                          -1.1952E+02  -1.3297E+01   2.0188E+01
 S2 Shroud                        1.9960E+02   1.0149E+01   4.3673E-04
 R3 Blade                        -1.9438E+01  -1.6564E+02  -1.9391E+01
 R3 Hub                          -1.3324E+02   5.1250E+00   1.9897E+01
 R3 Shroud                        2.3249E+02  -1.2974E+01   4.5428E-05
 S3 Blade                        -8.4340E+00   2.5280E+02  -8.8463E+01
 S3 Hub                          -1.8582E+02  -6.4364E+00   1.3286E+01
 S3 Shroud                        2.9928E+02   7.8866E+00   5.5612E-04
                                  -----------  -----------  -----------
 Domain Group Totals :            5.1102E+02   2.4813E+01  -9.2056E+01

+--------------------------------------------------------------------+
 |                       Viscous Force On Walls                       |
 +--------------------------------------------------------------------+
                                    X-Comp.      Y-Comp.      Z-Comp.

Domain Group: R1

R1 Blade                         5.9329E-01  -6.2837E-01   5.7437E-01
 R1 Hub                           6.9788E-03  -1.6057E-02   3.4532E-02
 R1 Shroud                       -1.6648E-02  -7.9317E-02   1.5662E-01
 S1 Blade                        -4.6978E-01   5.7843E-01   9.7099E-01
 S1 Hub                           3.1188E-02  -1.1031E-01   5.7365E-02
 S1 Shroud                       -2.5079E-02   4.0972E-01   3.1536E-01
 R2 Blade                         4.0471E-01  -4.9256E-01   9.1106E-01
 R2 Hub                           1.4414E-02  -2.5319E-02   6.2772E-02
 R2 Shroud                        2.6052E-03   1.6943E-01   2.3581E-01
 S2 Blade                        -1.4634E-01   6.3827E-01   1.0348E+00
 S2 Hub                           1.3987E-02   3.4468E-02   1.0564E-01
 S2 Shroud                       -2.4758E-02   4.5568E-01   4.0110E-01
 R3 Blade                         1.0706E-01  -3.5227E-01   1.2087E+00
 R3 Hub                           3.5353E-02  -6.9197E-02   2.5819E-01
 R3 Shroud                        1.0187E-02   2.5123E-01   1.0160E-01
 S3 Blade                         3.5674E-02   5.5735E-01   1.2678E+00
 S3 Hub                           1.7164E-02  -1.8972E-02   2.0474E-01
 S3 Shroud                       -1.3085E-02   3.3738E-01   4.9887E-01
                                  -----------  -----------  -----------
 Domain Group Totals :            5.7692E-01   1.6396E+00   8.4004E+00

+--------------------------------------------------------------------+
 |                      Pressure Moment On Walls                      |
 +--------------------------------------------------------------------+
                                    X-Comp.      Y-Comp.      Z-Comp.

Domain Group: R1

R1 Blade                         2.6519E+00   5.6827E+00  -1.3834E+01
 R1 Hub                          -6.0336E-01  -3.8300E+00   1.8603E-08
 R1 Shroud                        3.9340E-01   3.5785E+00   1.1290E-06
 S1 Blade                        -4.2848E+00   1.1951E-01   8.4017E+00
 S1 Hub                           1.1521E+00  -6.1437E+00  -2.9271E-07
 S1 Shroud                       -6.4260E-01   1.0470E+01  -5.1074E-05
 R2 Blade                         1.0309E+01   9.2780E-01  -1.2957E+01
 R2 Hub                          -1.1741E+00  -1.1173E+01  -1.8649E-06
 R2 Shroud                        1.3636E+00   1.6621E+01   2.9811E-05
 S2 Blade                        -1.4664E+01   7.5315E+00   1.3945E+01
 S2 Hub                           2.2202E+00  -1.9534E+01   1.3826E-06
 S2 Shroud                       -1.5122E+00   2.8990E+01  -6.9974E-05
 R3 Blade                         3.1215E+01  -1.0407E+00  -2.3087E+01
 R3 Hub                          -1.0650E+00  -2.7359E+01  -2.7609E-05
 R3 Shroud                        2.4757E+00   4.3882E+01   7.0152E-05
 S3 Blade                        -5.8202E+01   1.0563E+01   3.5845E+01
 S3 Hub                           1.5784E+00  -4.5103E+01   4.7663E-05
 S3 Shroud                       -1.8666E+00   6.9956E+01  -1.0721E-04
                                  -----------  -----------  -----------
 Domain Group Totals :           -3.0655E+01   8.4139E+01   8.3140E+00

+--------------------------------------------------------------------+
 |                       Viscous Moment On Walls                      |
 +--------------------------------------------------------------------+
                                    X-Comp.      Y-Comp.      Z-Comp.

Domain Group: R1

R1 Blade                        -3.7167E-03  -5.6915E-02  -6.9605E-02
 R1 Hub                          -1.8128E-04  -2.6037E-03  -1.1827E-03
 R1 Shroud                       -4.1523E-04  -2.5633E-02  -1.3201E-02
 S1 Blade                        -1.6958E-02  -1.5566E-01   8.3192E-02
 S1 Hub                           8.3180E-03  -3.1474E-03  -1.0692E-02
 S1 Shroud                       -1.9710E-02  -5.2212E-02   6.6762E-02
 R2 Blade                         3.2696E-02  -8.1551E-02  -6.0694E-02
 R2 Hub                           9.1608E-04  -4.7413E-03  -2.1897E-03
 R2 Shroud                       -2.4004E-02  -3.7393E-02   2.7423E-02
 S2 Blade                        -7.4413E-02  -1.6604E-01   9.0438E-02
 S2 Hub                          -2.2102E-03  -9.2124E-03   3.3232E-03
 S2 Shroud                       -5.8614E-02  -6.8065E-02   7.4176E-02
 R3 Blade                         4.7294E-02  -1.4726E-01  -4.8047E-02
 R3 Hub                           9.4031E-03  -2.2742E-02  -7.4224E-03
 R3 Shroud                       -5.3910E-02  -1.4061E-02   4.0862E-02
 S3 Blade                        -1.0904E-01  -1.7138E-01   7.8397E-02
 S3 Hub                           8.1744E-03  -2.0386E-02  -2.5813E-03
 S3 Shroud                       -7.0094E-02  -8.3368E-02   5.4845E-02
                                  -----------  -----------  -----------
 Domain Group Totals :           -3.2646E-01  -1.1224E+00   3.0380E-01

+--------------------------------------------------------------------+
 |                   Locations of Maximum Residuals                   |
 +--------------------------------------------------------------------+
 |       Equation       |      Domain Name      |     Node Number     |
 +--------------------------------------------------------------------+
 | U-Mom                | R1                    |         904558      |
 | V-Mom                | R1                    |          31161      |
 | W-Mom                | R1                    |           6866      |
 | P-Mass               | R1                    |          25853      |
 +----------------------+-----------------------+---------------------+
 | H-Energy             | R2                    |          78572      |
 +----------------------+-----------------------+---------------------+
 | K-TurbKE             | S2                    |         301194      |
 | O-TurbFreq           | R1                    |         428924      |
 +----------------------+-----------------------+---------------------+

Domain Name : R1
     Global Length                                         = 4.8212E-02
     Minimum Extent                                        = 4.1500E-02
     Maximum Extent                                        = 8.8248E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.5282E+02
     Advection Time                                        = 1.9070E-04
     Reynolds Number                                       = 7.8885E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 2.6177E+02

Domain Name : R2
     Global Length                                         = 4.4113E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 6.7287E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.8815E+02
     Advection Time                                        = 1.5309E-04
     Reynolds Number                                       = 8.2264E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 2.9979E+02

Domain Name : R3
     Global Length                                         = 4.1170E-02
     Minimum Extent                                        = 4.5130E-02
     Maximum Extent                                        = 5.2146E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 3.2670E+02
     Advection Time                                        = 1.2602E-04
     Reynolds Number                                       = 8.7049E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 3.3363E+02

Domain Name : S1
     Global Length                                         = 4.5427E-02
     Minimum Extent                                        = 3.8500E-02
     Maximum Extent                                        = 7.8332E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.6783E+02
     Advection Time                                        = 1.6961E-04
     Reynolds Number                                       = 7.8742E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 2.2024E+02

Domain Name : S2
     Global Length                                         = 4.2664E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 5.8926E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.9472E+02
     Advection Time                                        = 1.4476E-04
     Reynolds Number                                       = 8.1377E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 3.2412E+02

Domain Name : S3
     Global Length                                         = 3.9060E-02
     Minimum Extent                                        = 4.3000E-02
     Maximum Extent                                        = 4.5335E-02
     Density                                               = 1.1850E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 3.7333E+02
     Advection Time                                        = 1.0462E-04
     Reynolds Number                                       = 9.4374E+05
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 7.9842E+02

+--------------------------------------------------------------------+
 |                     Variable Range Information                     |
 +--------------------------------------------------------------------+

Domain Name : R1
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.19E+00 |  1.19E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Static Entropy                             | -3.40E+02 |  4.66E+02 |
 | Velocity u                                 | -1.64E+02 |  3.28E+02 |
 | Velocity v                                 | -3.78E+02 |  3.13E+02 |
 | Velocity w                                 | -2.69E+02 |  4.04E+02 |
 | Pressure                                   | -1.13E+04 |  1.64E+05 |
 | Turbulence Kinetic Energy                  |  5.67E-02 |  1.04E+04 |
 | Turbulence Eddy Frequency                  |  5.11E+03 |  1.94E+08 |
 | Eddy Viscosity                             |  5.33E-10 |  5.98E-02 |
 | Temperature                                |  2.12E+02 |  4.74E+02 |
 | Static Enthalpy                            | -8.61E+04 |  1.77E+05 |
 | Total Enthalpy                             | -4.73E+03 |  1.77E+05 |
 | Wall Scale                                 | -6.14E-07 |  1.25E-04 |
 | Wall Distance                              |  0.00E+00 |  1.57E-02 |
 +--------------------------------------------------------------------+

Domain Name : R2
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.19E+00 |  1.19E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Static Entropy                             | -7.56E+02 |  3.92E+02 |
 | Velocity u                                 | -1.76E+02 |  4.26E+02 |
 | Velocity v                                 | -4.85E+02 |  4.19E+02 |
 | Velocity w                                 | -2.20E+02 |  6.11E+02 |
 | Pressure                                   | -1.30E+05 |  1.75E+05 |
 | Turbulence Kinetic Energy                  |  5.17E-02 |  1.38E+04 |
 | Turbulence Eddy Frequency                  |  1.15E+04 |  1.76E+08 |
 | Eddy Viscosity                             |  4.09E-10 |  6.60E-02 |
 | Temperature                                |  1.41E+02 |  4.40E+02 |
 | Static Enthalpy                            | -1.58E+05 |  1.43E+05 |
 | Total Enthalpy                             |  9.79E+03 |  1.55E+05 |
 | Wall Scale                                 | -1.37E-07 |  1.14E-04 |
 | Wall Distance                              |  0.00E+00 |  1.50E-02 |
 +--------------------------------------------------------------------+

Domain Name : R3
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.19E+00 |  1.19E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Static Entropy                             | -2.69E+02 |  6.36E+02 |
 | Velocity u                                 | -1.67E+02 |  2.97E+02 |
 | Velocity v                                 | -5.00E+02 |  4.10E+02 |
 | Velocity w                                 | -2.41E+02 |  5.62E+02 |
 | Pressure                                   | -2.68E+04 |  2.24E+05 |
 | Turbulence Kinetic Energy                  |  1.05E-01 |  1.03E+04 |
 | Turbulence Eddy Frequency                  |  2.50E+04 |  2.02E+08 |
 | Eddy Viscosity                             |  8.70E-10 |  4.85E-02 |
 | Temperature                                |  2.28E+02 |  5.62E+02 |
 | Static Enthalpy                            | -7.04E+04 |  2.65E+05 |
 | Total Enthalpy                             |  6.78E+04 |  2.84E+05 |
 | Wall Scale                                 | -1.27E-11 |  1.04E-04 |
 | Wall Distance                              |  0.00E+00 |  1.39E-02 |
 +--------------------------------------------------------------------+

Domain Name : S1
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.19E+00 |  1.19E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Static Entropy                             | -4.59E+02 |  3.18E+02 |
 | Velocity u                                 | -3.47E+02 |  2.08E+02 |
 | Velocity v                                 | -3.07E+02 |  5.66E+02 |
 | Velocity w                                 | -1.34E+02 |  5.05E+02 |
 | Pressure                                   | -8.76E+04 |  1.72E+05 |
 | Turbulence Kinetic Energy                  |  2.14E-02 |  1.07E+04 |
 | Turbulence Eddy Frequency                  |  6.78E+03 |  1.89E+08 |
 | Eddy Viscosity                             |  1.72E-10 |  6.77E-02 |
 | Temperature                                |  1.89E+02 |  4.09E+02 |
 | Static Enthalpy                            | -1.10E+05 |  1.11E+05 |
 | Total Enthalpy                             | -3.37E+03 |  1.24E+05 |
 | Wall Scale                                 | -8.43E-08 |  1.17E-04 |
 | Wall Distance                              |  0.00E+00 |  1.53E-02 |
 +--------------------------------------------------------------------+

Domain Name : S2
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.19E+00 |  1.19E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Static Entropy                             | -5.06E+02 |  5.28E+02 |
 | Velocity u                                 | -2.79E+02 |  1.93E+02 |
 | Velocity v                                 | -1.45E+02 |  7.19E+02 |
 | Velocity w                                 | -2.36E+02 |  5.27E+02 |
 | Pressure                                   | -1.76E+05 |  1.98E+05 |
 | Turbulence Kinetic Energy                  |  4.08E-02 |  8.54E+03 |
 | Turbulence Eddy Frequency                  |  2.10E+04 |  1.84E+08 |
 | Eddy Viscosity                             |  3.19E-10 |  4.27E-02 |
 | Temperature                                |  1.80E+02 |  5.04E+02 |
 | Static Enthalpy                            | -1.19E+05 |  2.07E+05 |
 | Total Enthalpy                             |  4.90E+04 |  2.07E+05 |
 | Wall Scale                                 | -1.58E-09 |  1.10E-04 |
 | Wall Distance                              |  0.00E+00 |  1.47E-02 |
 +--------------------------------------------------------------------+

Domain Name : S3
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.19E+00 |  1.19E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Static Entropy                             | -4.26E+03 |  9.95E+02 |
 | Velocity u                                 | -1.70E+02 |  1.80E+02 |
 | Velocity v                                 | -3.47E+02 |  1.01E+03 |
 | Velocity w                                 | -3.92E+02 |  5.98E+02 |
 | Pressure                                   | -4.30E+05 |  2.85E+05 |
 | Turbulence Kinetic Energy                  |  3.36E-01 |  1.79E+04 |
 | Turbulence Eddy Frequency                  |  1.59E+04 |  2.26E+08 |
 | Eddy Viscosity                             |  2.69E-09 |  3.19E-02 |
 | Temperature                                |  4.29E+00 |  8.03E+02 |
 | Static Enthalpy                            | -2.95E+05 |  5.07E+05 |
 | Total Enthalpy                             |  1.01E+05 |  5.07E+05 |
 | Wall Scale                                 | -4.52E-13 |  9.57E-05 |
 | Wall Distance                              |  0.00E+00 |  1.36E-02 |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 |           CPU Requirements of Numerical Solution - Total           |
 +--------------------------------------------------------------------+

Subsystem Name                  Discretization       Linear Solution
                                (secs.   %total)     (secs.   %total) 
 ----------------------------------------------------------------------
 Wall Scale                     2.81E+02   0.1 %     4.08E+02   0.2 %
 Momentum and Mass              8.40E+04  36.6 %     2.13E+04   9.3 %
 Heat Transfer                  2.23E+04   9.7 %     2.84E+03   1.2 %
 TurbKE and TurbFreq            2.23E+04   9.7 %     6.91E+03   3.0 %
                                -------- -------     --------  ------
 Subsystem Summary              1.29E+05  56.1 %     3.15E+04  13.7 %

GGI Intersection               3.73E-01    0.0 %
 File Reading                   1.03E+01    0.0 %
 Search Calculations            6.76E+00    0.0 %
 Variable Updates               6.68E+04   29.1 %
 File Writing                   2.71E+02    0.1 %
 Miscellaneous                  2.39E+03    1.0 %
                                --------
 Total                          2.30E+05

Job finished:   Thu Jul 11 21:53:10 2024

Total wall clock time: 3.832E+04 seconds
             or: (          0:        10:        38:    39.061 )
                 (       Days:     Hours:   Minutes:   Seconds )

--> Final synchronization point reached by all partitions.
End of solution stage.

+--------------------------------------------------------------------+
 | The results from this run of the ANSYS CFX Solver have been        |
 | written to C:/Users/Emre/Desktop/yer analizi/Analiz                |
 | 11_pending/dp0_CFX_Solution/Fluid Flow CFX_001.res                 |
 +--------------------------------------------------------------------+

+--------------------------------------------------------------------+
 | For CFX runs launched from Workbench, the final locations of       |
 | directories and files generated may differ from those shown.       |
 +--------------------------------------------------------------------+

This run of the ANSYS CFX Solver has finished.

Texte modifié

Ouvrir un fichier

This run of the CFX Release 19.2 Solver started at 16:01:45 on 15 Jul
 2024 by user Emre on DESKTOP-6FIBNC0 (intel_xeon64.sse2_winnt) using
 the command:
 
  "C:\Program Files\ANSYS Inc\v192\CFX\bin\perllib\cfx5solve.pl" -batch
    -ccl runInput.ccl -fullname "Fluid Flow CFX_001"
 
 Release 19.2
 
  Point Releases and Patches installed:
  ANSYS, Inc. Products Release 19.2
  SpaceClaim Release 19.2
  AIM Release 19.2
  Autodyn Release 19.2
  LS-DYNA Release 19.2
  CFX (includes CFD-Post) Release 19.2
  Chemkin Release 19.2
  EnSight Release 19.2
  FENSAP-ICE Release 19.2
  Fluent (includes CFD-Post) Release 19.2
  Forte Release 19.2
  Polyflow (includes CFD-Post) Release 19.2
  TurboGrid Release 19.2
  ICEM CFD Release 19.2
  Aqwa Release 19.2
  Mechanical Products Release 19.2
  Icepak (includes CFD-Post) Release 19.2
  ACIS Geometry Interface Release 19.2
  AutoCAD Geometry Interface Release 19.2
  Catia, Version 4 Geometry Interface Release 19.2
  Catia, Version 6 Geometry Interface Release 19.2
  Creo Elements/Direct Modeling Geometry Interface Release 19.2
  Creo Parametric Geometry Interface Release 19.2
  Inventor Geometry Interface Release 19.2
  JTOpen Geometry Interface Release 19.2
  NX Geometry Interface Release 19.2
  Parasolid Geometry Interface  Release 19.2
  Solid Edge Geometry Interface Release 19.2
  SOLIDWORKS Geometry Interface Release 19.2
  ANSYS, Inc. License Manager Release 19.2
 
 Setting up CFX Solver run ...
 
 
 +--------------------------------------------------------------------+
 |                                                                    |
 |                    CFX Command Language for Run                    |
 |                                                                    |
 +--------------------------------------------------------------------+
 
 LIBRARY:
   CEL:
     EXPRESSIONS:
       Pidffmoni = massFlowAveAbs(Total Pressure in Stn Frame)@S3 \
         Outlet-massFlowAveAbs(Total Pressure in Stn Frame)@R1 Inlet
     END
   END
   MATERIAL: Air Ideal Gas
     Material Description = Air Ideal Gas (constant Cp)
     Material Group = Air Data, Calorically Perfect Ideal Gases
     Option = Pure Substance
     Thermodynamic State = Gas
     PROPERTIES:
       Option = General Material
       EQUATION OF STATE:
         Molar Mass = 28.96 [kg kmol^-1]
         Option = Ideal Gas
       END
       SPECIFIC HEAT CAPACITY:
         Option = Value
         Specific Heat Capacity = 1.0044E+03 [J kg^-1 K^-1]
         Specific Heat Type = Constant Pressure
       END
       REFERENCE STATE:
         Option = Specified Point
         Reference Pressure = 1 [atm]
         Reference Specific Enthalpy = 0. [J/kg]
         Reference Specific Entropy = 0. [J/kg/K]
         Reference Temperature = 25 [C]
       END
       DYNAMIC VISCOSITY:
         Dynamic Viscosity = 1.831E-05 [kg m^-1 s^-1]
         Option = Value
       END
       THERMAL CONDUCTIVITY:
         Option = Value
         Thermal Conductivity = 2.61E-2 [W m^-1 K^-1]
       END
       ABSORPTION COEFFICIENT:
         Absorption Coefficient = 0.01 [m^-1]
         Option = Value
       END
       SCATTERING COEFFICIENT:
         Option = Value
         Scattering Coefficient = 0.0 [m^-1]
       END
       REFRACTIVE INDEX:
         Option = Value
         Refractive Index = 1.0 [m m^-1]
       END
     END
   END
 END
 FLOW: Flow Analysis 1
   SOLUTION UNITS:
     Angle Units = [rad]
     Length Units = [m]
     Mass Units = [kg]
     Solid Angle Units = [sr]
     Temperature Units = [K]
     Time Units = [s]
   END
   ANALYSIS TYPE:
     Option = Steady State
     EXTERNAL SOLVER COUPLING:
       Option = None
     END
   END
   DOMAIN: R1
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage
     BOUNDARY: R1 Blade
       Boundary Type = WALL
       Frame Type = Rotating
       Location = BLADE
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R1 Hub
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = HUB
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R1 Inlet
       Boundary Type = INLET
       Frame Type = Stationary
       Location = INFLOW
       BOUNDARY CONDITIONS:
         FLOW DIRECTION:
           Option = Normal to Boundary Condition
         END
         FLOW REGIME:
           Option = Subsonic
         END
         HEAT TRANSFER:
           Option = Stationary Frame Total Temperature
           Stationary Frame Total Temperature = 288 [K]
         END
         MASS AND MOMENTUM:
           Option = Stationary Frame Total Pressure
           Relative Pressure = 1 [atm]
         END
         TURBULENCE:
           Option = Medium Intensity and Eddy Viscosity Ratio
         END
       END
     END
     BOUNDARY: R1 Shroud
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = SHROUD
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R1 to R1 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R1 to R1 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 to R1 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Alternate Rotation Model = true
         Angular Velocity = 19451 [rev min^-1]
         Option = Rotating
         AXIS DEFINITION:
           Option = Coordinate Axis
           Rotation Axis = Coord 0.3
         END
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Air Ideal Gas
       Material = Air Ideal Gas
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: R2
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 3
     BOUNDARY: R2 Blade
       Boundary Type = WALL
       Frame Type = Rotating
       Location = BLADE 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R2 Hub
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = HUB 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R2 Shroud
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = SHROUD 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R2 to R2 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R2 to R2 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R2 to S1 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 to R2 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 3
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Alternate Rotation Model = true
         Angular Velocity = 19451 [rev min^-1]
         Option = Rotating
         AXIS DEFINITION:
           Option = Coordinate Axis
           Rotation Axis = Coord 0.3
         END
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Air Ideal Gas
       Material = Air Ideal Gas
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: R3
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 5
     BOUNDARY: R3 Blade
       Boundary Type = WALL
       Frame Type = Rotating
       Location = BLADE 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R3 Hub
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = HUB 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R3 Shroud
       Boundary Type = WALL
       Coord Frame = Coord 0
       Frame Type = Rotating
       Location = SHROUD 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: R3 to R3 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R3 to R3 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: R3 to S2 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S3 to R3 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 5
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Alternate Rotation Model = true
         Angular Velocity = 19451 [rev min^-1]
         Option = Rotating
         AXIS DEFINITION:
           Option = Coordinate Axis
           Rotation Axis = Coord 0.3
         END
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Air Ideal Gas
       Material = Air Ideal Gas
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: S1
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 2
     BOUNDARY: R2 to S1 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 Blade
       Boundary Type = WALL
       Location = BLADE 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S1 Hub
       Boundary Type = WALL
       Location = HUB 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S1 Shroud
       Boundary Type = WALL
       Location = SHROUD 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S1 to R1 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 to S1 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S1 to S1 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 2
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Option = Stationary
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Air Ideal Gas
       Material = Air Ideal Gas
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: S2
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 4
     BOUNDARY: R3 to S2 Side 2
       Boundary Type = INTERFACE
       Location = OUTFLOW 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 Blade
       Boundary Type = WALL
       Location = BLADE 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S2 Hub
       Boundary Type = WALL
       Location = HUB 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S2 Shroud
       Boundary Type = WALL
       Location = SHROUD 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S2 to R2 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 to S2 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S2 to S2 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 4
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Option = Stationary
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Air Ideal Gas
       Material = Air Ideal Gas
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN: S3
     Coord Frame = Coord 0
     Domain Type = Fluid
     Location = Passage 6
     BOUNDARY: S3 Blade
       Boundary Type = WALL
       Location = BLADE 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S3 Hub
       Boundary Type = WALL
       Location = HUB 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S3 Outlet
       Boundary Type = OUTLET
       Location = OUTFLOW 6
       BOUNDARY CONDITIONS:
         FLOW REGIME:
           Option = Subsonic
         END
         MASS AND MOMENTUM:
           Mass Flow Rate = 13 [kg s^-1]
           Mass Flow Rate Area = Total for All Sectors
           Option = Mass Flow Rate
         END
       END
     END
     BOUNDARY: S3 Shroud
       Boundary Type = WALL
       Location = SHROUD 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Adiabatic
         END
         MASS AND MOMENTUM:
           Option = No Slip Wall
         END
         WALL ROUGHNESS:
           Option = Smooth Wall
         END
       END
     END
     BOUNDARY: S3 to R3 Side 1
       Boundary Type = INTERFACE
       Location = INFLOW 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S3 to S3 Periodic 1 Side 1
       Boundary Type = INTERFACE
       Location = PER1 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     BOUNDARY: S3 to S3 Periodic 1 Side 2
       Boundary Type = INTERFACE
       Location = PER2 6
       BOUNDARY CONDITIONS:
         HEAT TRANSFER:
           Option = Conservative Interface Flux
         END
         MASS AND MOMENTUM:
           Option = Conservative Interface Flux
         END
         TURBULENCE:
           Option = Conservative Interface Flux
         END
       END
     END
     DOMAIN MODELS:
       BUOYANCY MODEL:
         Option = Non Buoyant
       END
       DOMAIN MOTION:
         Option = Stationary
       END
       MESH DEFORMATION:
         Option = None
       END
       REFERENCE PRESSURE:
         Reference Pressure = 0 [atm]
       END
     END
     FLUID DEFINITION: Air Ideal Gas
       Material = Air Ideal Gas
       Option = Material Library
       MORPHOLOGY:
         Option = Continuous Fluid
       END
     END
     FLUID MODELS:
       COMBUSTION MODEL:
         Option = None
       END
       HEAT TRANSFER MODEL:
         Include Viscous Work Term = True
         Option = Total Energy
       END
       THERMAL RADIATION MODEL:
         Option = None
       END
       TURBULENCE MODEL:
         Option = SST
       END
       TURBULENT WALL FUNCTIONS:
         High Speed Model = Off
         Option = Automatic
       END
     END
   END
   DOMAIN INTERFACE: R1 to R1 Periodic 1
     Boundary List1 = R1 to R1 Periodic 1 Side 1
     Boundary List2 = R1 to R1 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: R2 to R2 Periodic 1
     Boundary List1 = R2 to R2 Periodic 1 Side 1
     Boundary List2 = R2 to R2 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: R2 to S1
     Boundary List1 = R2 to S1 Side 1
     Boundary List2 = R2 to S1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: R3 to R3 Periodic 1
     Boundary List1 = R3 to R3 Periodic 1 Side 1
     Boundary List2 = R3 to R3 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: R3 to S2
     Boundary List1 = R3 to S2 Side 1
     Boundary List2 = R3 to S2 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S1 to R1
     Boundary List1 = S1 to R1 Side 1
     Boundary List2 = S1 to R1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S1 to S1 Periodic 1
     Boundary List1 = S1 to S1 Periodic 1 Side 1
     Boundary List2 = S1 to S1 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: S2 to R2
     Boundary List1 = S2 to R2 Side 1
     Boundary List2 = S2 to R2 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S2 to S2 Periodic 1
     Boundary List1 = S2 to S2 Periodic 1 Side 1
     Boundary List2 = S2 to S2 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   DOMAIN INTERFACE: S3 to R3
     Boundary List1 = S3 to R3 Side 1
     Boundary List2 = S3 to R3 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = General Connection
       FRAME CHANGE:
         Option = Stage
         DOWNSTREAM VELOCITY CONSTRAINT:
           Frame Type = Rotating
           Option = Constant Total Pressure
         END
       END
       PITCH CHANGE:
         Option = Automatic
       END
     END
     MESH CONNECTION:
       Option = GGI
     END
   END
   DOMAIN INTERFACE: S3 to S3 Periodic 1
     Boundary List1 = S3 to S3 Periodic 1 Side 1
     Boundary List2 = S3 to S3 Periodic 1 Side 2
     Interface Type = Fluid Fluid
     INTERFACE MODELS:
       Option = Rotational Periodicity
       AXIS DEFINITION:
         Option = Coordinate Axis
         Rotation Axis = Coord 0.3
       END
     END
     MESH CONNECTION:
       Option = Automatic
     END
   END
   OUTPUT CONTROL:
     MONITOR OBJECTS:
       EFFICIENCY OUTPUT:
         Inflow Boundary = R1 Inlet
         Option = Output To Solver Monitor
         Outflow Boundary = S3 Outlet
       END
       MONITOR BALANCES:
         Option = Full
       END
       MONITOR FORCES:
         Option = Full
       END
       MONITOR PARTICLES:
         Option = Full
       END
       MONITOR POINT: Pdifffmoni
         Coord Frame = Coord 0
         Expression Value = Pidffmoni
         Option = Expression
       END
       MONITOR RESIDUALS:
         Option = Full
       END
       MONITOR TOTALS:
         Option = Full
       END
     END
     RESULTS:
       File Compression Level = Default
       Option = Standard
     END
   END
   SOLVER CONTROL:
     Turbulence Numerics = High Resolution
     ADVECTION SCHEME:
       Option = High Resolution
     END
     CONVERGENCE CONTROL:
       Length Scale Option = Conservative
       Maximum Number of Iterations = 500
       Minimum Number of Iterations = 1
       Timescale Control = Auto Timescale
       Timescale Factor = 1.0
     END
     CONVERGENCE CRITERIA:
       Residual Target = 0.000001
       Residual Type = RMS
     END
     DYNAMIC MODEL CONTROL:
       Global Dynamic Model Control = On
     END
   END
 END
 COMMAND FILE:
   Version = 19.2
   Results Version = 19.2
 END
 SIMULATION CONTROL:
   EXECUTION CONTROL:
     EXECUTABLE SELECTION:
       Double Precision = Yes
       Large Problem = No
     END
     INTERPOLATOR STEP CONTROL:
       Runtime Priority = Standard
       MEMORY CONTROL:
         Memory Allocation Factor = 1.0
       END
     END
     PARALLEL HOST LIBRARY:
       HOST DEFINITION: desktop6fibnc0
         Remote Host Name = DESKTOP-6FIBNC0
         Host Architecture String = winnt-amd64
         Installation Root = C:\Program Files\ANSYS Inc\v%v\CFX
       END
     END
     PARTITIONER STEP CONTROL:
       Multidomain Option = Automatic
       Runtime Priority = Standard
       MEMORY CONTROL:
         Memory Allocation Factor = 1.0
       END
       PARTITION SMOOTHING:
         Maximum Partition Smoothing Sweeps = 100
         Option = Smooth
       END
       PARTITIONING TYPE:
         MeTiS Type = k-way
         Option = MeTiS
         Partition Size Rule = Automatic
         Partition Weight Factors = 0.50000, 0.50000
       END
     END
     RUN DEFINITION:
       Run Mode = Full
       Solver Input File = Fluid Flow CFX.def
       Solver Results File = C:/Users/Emre/Desktop/deneme/yer analizi/Analiz \
         11_pending/dp0_CFX_Solution-1/Fluid Flow CFX_001.res
     END
     SOLVER STEP CONTROL:
       Runtime Priority = Standard
       MEMORY CONTROL:
         Memory Allocation Factor = 1.0
       END
       PARALLEL ENVIRONMENT:
         Number of Processes = 2
         Start Method = Intel MPI Local Parallel
         Parallel Host List = desktop6fibnc0*2
       END
     END
   END
 END
 
 
 +--------------------------------------------------------------------+
 |                                                                    |
 |                            Partitioning                            |
 |                                                                    |
 +--------------------------------------------------------------------+

Run mode:       partitioning run

Host computer:  DESKTOP-6FIBNC0 (PID:2116)

Job started:    Mon Jul 15 16:01:47 2024

INFO: Your license enables 4-way parallel execution.
       For faster simulations, please start the application with the
       appropriate parallel options.

| Real       | Integer    | Character | Logical  | Double
 ----------+------------+------------+-----------+----------+----------
 Mwords    |      29.73 |     280.40 |      7.86 |     0.12 |     0.00
 Mbytes    |     226.84 |    1069.66 |      7.49 |     0.46 |     0.00
 ----------+------------+------------+-----------+----------+----------

Domain Name : R1

Total Number of Nodes                                =     1080078

Total Number of Elements                             =     1037750
         Total Number of Hexahedrons                      =     1037750

Total Number of Faces                                =       83810

Domain Name : R2

Total Number of Nodes                                =     1015612

Total Number of Elements                             =      976752
         Total Number of Hexahedrons                      =      976752

Total Number of Faces                                =       76962

Domain Name : R3

Total Number of Nodes                                =     1091094

Total Number of Elements                             =     1050200
         Total Number of Hexahedrons                      =     1050200

Total Number of Faces                                =       81008

Domain Name : S1

Total Number of Nodes                                =     1023774

Total Number of Elements                             =      982150
         Total Number of Hexahedrons                      =      982150

Total Number of Faces                                =       82386

Domain Name : S2

Total Number of Nodes                                =     1002558

Total Number of Elements                             =      965050
         Total Number of Hexahedrons                      =      965050

Total Number of Faces                                =       74302

Domain Name : S3

Total Number of Nodes                                =      988512

Total Number of Elements                             =      946731
         Total Number of Hexahedrons                      =      946731

Total Number of Faces                                =       82672
 
 Global Statistics :

Global Number of Nodes                               =     6201628

Global Number of Elements                            =     5958633
         Total Number of Hexahedrons                      =     5958633

Global Number of Faces                               =      481140

Domain Interface Name : R1 to R1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to R2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to S1

Domain Interface Name : R3 to R3 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R3 to S2

Domain Interface Name : S1 to R1

Domain Interface Name : S1 to S1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S2 to R2

Domain Interface Name : S2 to S2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S3 to R3

Domain Interface Name : S3 to S3 Periodic 1

Discretization type                                  =         1:1

Coupled partitioning of domains:  
   R1
   S1
   R2
   S2
   R3
   S3

- Partitioning tool:       MeTiS multilevel k-way algorithm
 - Number of partitions:             2
 - Number of graph-nodes:      6162028
 - Number of graph-edges:     37226124

+--------------------------------------------------------------------+
 |                 Iso-Partition Connection Statistics                |
 +--------------------------------------------------------------------+
 | Domains in Group          |        |           Vertices            |
 |                           | Smooth +---------+----------+----------+
 |                           | Sweeps |  Moves  |   <25%   |   <50%   |
 +---------------------------+--------+---------+----------+----------+
 | R1,S1,R2,S2,R3,S3,        |     3  |      43 |       0  |       0  |
 +---------------------------+--------+---------+----------+----------+

Partitioning information for domains:  
   R1
   S1
   R2
   S2
   R3
   S3

+------------------+------------------------+-----------------+
        |     Elements     |        Vertices        |     Faces       |
 +------+------------------+------------------------+-----------------+
 | Part |   Number     %   |   Number     %   %Ovlp |  Number     %   |
 +------+------------------+------------------------+-----------------+
 | Full |   5958633        |   6201628              |   481140        |
 +------+------------------+------------------------+-----------------+
 |    1 |   2986095   50.1 |   3109706   50.0   0.2 |   239112   49.6 |
 |    2 |   2978163   49.9 |   3103597   50.0   0.2 |   242715   50.4 |
 +------+------------------+------------------------+-----------------+
 | Min  |   2978163   49.9 |   3103597   50.0   0.2 |   239112   49.6 |
 |(part)|           (    2)|           (    2     2)|          (    1)|
 +------+------------------+------------------------+-----------------+
 | Max  |   2986095   50.1 |   3109706   50.0   0.2 |   242715   50.4 |
 |(part)|           (    1)|           (    1     1)|          (    2)|
 +------+------------------+------------------------+-----------------+
 | Ave  |   2982129   50.0 |   3106652   50.0   0.2 |   240914   50.0 |
 +------+------------------+------------------------+-----------------+
 | Sum  |   5964258  100.0 |   6213303  100.0       |   481827  100.0 |
 +------+------------------+------------------------+-----------------+

+--------------------------------------------------------------------+
 |                 Partitioning CPU-Time Requirements                 |
 +--------------------------------------------------------------------+
 GGI Intersection               1.14E+00    7.4 %
 Preparations                   2.16E+00   14.1 %
 Low-level Mesh Partitioning    3.17E+00   20.7 %
 File Reading                   1.26E+00    8.2 %
 Partition Smoothing            1.74E+00   11.4 %
 Topology - Domain Interface    1.30E-01    0.8 %
 Topology - Global              1.17E-01    0.8 %
 Topology - Element/Face/Patch  3.78E-01    2.5 %
 Topology - Vertex              6.40E-02    0.4 %
 Data Compression               1.00E-02    0.1 %
 Variable Updates               2.00E-03    0.0 %
 File Writing                   4.86E-01    3.2 %
 Miscellaneous                  4.67E+00   30.4 %
                                --------
 Total                          1.53E+01

Host computer:  DESKTOP-6FIBNC0 (PID:2116)

Job finished:   Mon Jul 15 16:02:03 2024

Total wall clock time: 1.534E+01 seconds
             or: (          0:         0:         0:    15.335 )
                 (       Days:     Hours:   Minutes:   Seconds )

Run mode:       parallel run (MPI)

Job started:    Mon Jul 15 16:02:04 2024

INFO: Your license enables 4-way parallel execution.
       For faster simulations, please start the application with the
       appropriate parallel options.

Allocated storage in:    Mwords
                          Mbytes

Partition | Real       | Integer    | Character | Logical  | Double
 ----------+------------+------------+-----------+----------+----------
   Minimum |     857.44 |     211.57 |      8.31 |     0.12 |     0.01
  (     1) |    6541.73 |     807.07 |      7.92 |     0.11 |     0.06
 ----------+------------+------------+-----------+----------+----------
   Maximum |     897.88 |     212.07 |      8.31 |     0.12 |     0.01
  (     2) |    6850.27 |     808.99 |      7.92 |     0.11 |     0.06
 ----------+------------+------------+-----------+----------+----------
   Average |     877.66 |     211.82 |      8.31 |     0.12 |     0.01
           |    6696.00 |     808.03 |      7.92 |     0.11 |     0.06
 ----------+------------+------------+-----------+----------+----------
     Total |    1755.32 |     423.64 |     16.61 |     0.24 |     0.02
           |   13392.00 |    1616.06 |     15.84 |     0.23 |     0.13
 ----------+------------+------------+-----------+----------+----------

+--------------------------------------------------------------------+
 |                  Host Memory Information (Mbytes)                  |
 +--------------------------------------------------------------------+
 |           Host         | Npart |   System    |  Allocated  |   %   |
 +------------------------+-------+-------------+-------------+-------+
 | DESKTOP-6FIBNC0        |    2  |    16222.22 |    15024.26 | 92.62 |
 +------------------------+-------+-------------+-------------+-------+

Domain Name : R1

Total Number of Nodes                                =     1080078

Total Number of Elements                             =     1037750
         Total Number of Hexahedrons                      =     1037750

Total Number of Faces                                =       83810

Domain Name : R2

Total Number of Nodes                                =     1015612

Total Number of Elements                             =      976752
         Total Number of Hexahedrons                      =      976752

Total Number of Faces                                =       76962

Domain Name : R3

Total Number of Nodes                                =     1091094

Total Number of Elements                             =     1050200
         Total Number of Hexahedrons                      =     1050200

Total Number of Faces                                =       81008

Domain Name : S1

Total Number of Nodes                                =     1023774

Total Number of Elements                             =      982150
         Total Number of Hexahedrons                      =      982150

Total Number of Faces                                =       82386

Domain Name : S2

Total Number of Nodes                                =     1002558

Total Number of Elements                             =      965050
         Total Number of Hexahedrons                      =      965050

Total Number of Faces                                =       74302

Domain Name : S3

Total Number of Nodes                                =      988512

Total Number of Elements                             =      946731
         Total Number of Hexahedrons                      =      946731

Total Number of Faces                                =       82672
 
 Global Statistics :

Global Number of Nodes                               =     6201628

Global Number of Elements                            =     5958633
         Total Number of Hexahedrons                      =     5958633

Global Number of Faces                               =      481140

Domain Interface Name : R1 to R1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to R2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R2 to S1

Domain Interface Name : R3 to R3 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : R3 to S2

Domain Interface Name : S1 to R1

Domain Interface Name : S1 to S1 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S2 to R2

Domain Interface Name : S2 to S2 Periodic 1

Discretization type                                  =         1:1

Domain Interface Name : S3 to R3

Domain Interface Name : S3 to S3 Periodic 1

Discretization type                                  =         1:1

Monitor Point: Pdifffmoni

Domain Name : R1
     Global Length                                         = 4.8212E-02
     Minimum Extent                                        = 4.1500E-02
     Maximum Extent                                        = 8.9697E-02
     Density                                               = 1.2254E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.8666E+02
     Advection Time                                        = 1.6818E-04
     Reynolds Number                                       = 9.2497E+05
     Speed of Sound                                        = 3.4027E+02
     Mach Number                                           = 8.4247E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01

Domain Name : R2
     Global Length                                         = 4.4113E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 6.8992E-02
     Density                                               = 1.2254E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 3.3125E+02
     Advection Time                                        = 1.3317E-04
     Reynolds Number                                       = 9.7797E+05
     Speed of Sound                                        = 3.4027E+02
     Mach Number                                           = 9.7352E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01

Domain Name : R3
     Global Length                                         = 4.1170E-02
     Minimum Extent                                        = 4.5034E-02
     Maximum Extent                                        = 5.4118E-02
     Density                                               = 1.2254E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 3.7710E+02
     Advection Time                                        = 1.0918E-04
     Reynolds Number                                       = 1.0390E+06
     Speed of Sound                                        = 3.4027E+02
     Mach Number                                           = 1.1082E+00
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01

Domain Name : S1
     Global Length                                         = 4.5427E-02
     Minimum Extent                                        = 3.8500E-02
     Maximum Extent                                        = 7.8332E-02
     Density                                               = 1.2254E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 1.6461E+02
     Advection Time                                        = 2.7597E-04
     Reynolds Number                                       = 5.0045E+05
     Speed of Sound                                        = 3.4027E+02
     Mach Number                                           = 4.8376E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01

Domain Name : S2
     Global Length                                         = 4.2664E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 5.9282E-02
     Density                                               = 1.2254E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.1962E+02
     Advection Time                                        = 1.9426E-04
     Reynolds Number                                       = 6.2710E+05
     Speed of Sound                                        = 3.4027E+02
     Mach Number                                           = 6.4545E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01

Domain Name : S3
     Global Length                                         = 3.9060E-02
     Minimum Extent                                        = 4.3000E-02
     Maximum Extent                                        = 4.6403E-02
     Density                                               = 1.2254E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.7912E+02
     Advection Time                                        = 1.3994E-04
     Reynolds Number                                       = 7.2965E+05
     Speed of Sound                                        = 3.4027E+02
     Mach Number                                           = 8.2030E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01

Subsystem : Wall Scale

Subsystem : Momentum and Mass

Subsystem : Heat Transfer

Subsystem : TurbKE and TurbFreq

======================================================================
 OUTER LOOP ITERATION =    1                    CPU SECONDS = 3.825E+02
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.00 | 2.3E-04 | 1.4E-03 | 43.0  2.0E-01  ok|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.00 | 2.0E-04 | 8.6E-03 |       7.2E-01  ok|
 | V-Mom                | 0.00 | 1.3E-03 | 5.2E-02 |       5.1E-01  ok|
 | W-Mom                | 0.00 | 3.4E-03 | 9.8E-02 |       9.6E-02  OK|
 | P-Mass               | 0.00 | 2.4E-02 | 3.7E-01 |  9.1  1.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.00 | 2.8E-02 | 6.9E-01 |  5.7  5.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.00 | 2.1E-02 | 9.0E-02 |  5.7  8.2E-03  OK|
 | O-TurbFreq           | 0.00 | 9.3E-02 | 1.0E+00 |  7.8  7.0E-03  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    2                    CPU SECONDS = 9.372E+02
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.48 | 1.1E-04 | 4.0E-03 | 38.3  9.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 3.51 | 6.9E-04 | 1.6E-02 |       1.5E-01  ok|
 | V-Mom                | 3.05 | 4.1E-03 | 7.8E-02 |       1.6E-01  ok|
 | W-Mom                | 1.53 | 5.2E-03 | 1.7E-01 |       1.2E-01  ok|
 | P-Mass               | 0.29 | 7.0E-03 | 2.6E-01 |  9.1  6.3E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at   8.2% of the faces,   4.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.78 | 2.2E-02 | 8.7E-01 |  5.7  4.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 9.49 | 2.0E-01 | 1.8E+00 |  5.7  2.3E-03  OK|
 | O-TurbFreq           | 0.75 | 7.0E-02 | 3.5E-01 |  7.8  2.9E-05  OK|
 +----------------------+------+---------+---------+------------------+

======================================================================
 OUTER LOOP ITERATION =    3                    CPU SECONDS = 1.426E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.36 | 4.0E-05 | 1.5E-03 | 43.0  9.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.43 | 9.8E-04 | 3.3E-02 |       4.9E-01  ok|
 | V-Mom                | 1.50 | 6.1E-03 | 1.5E-01 |       3.3E-01  ok|
 | W-Mom                | 1.32 | 6.9E-03 | 2.7E-01 |       2.7E-01  ok|
 | P-Mass               | 1.08 | 7.5E-03 | 1.1E+00 |  5.1  8.8E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  13.7% of the faces,   7.1% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.74 | 1.6E-02 | 4.6E-01 |  5.7  5.8E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.12 | 2.4E-02 | 7.4E-01 |  5.7  3.5E-02  OK|
 | O-TurbFreq           | 0.43 | 3.0E-02 | 3.2E-01 |  7.8  2.0E-04  OK|
 +----------------------+------+---------+---------+------------------+
 +--------------------------------------------------------------------+
 | Notice: The maximum Mach number is  6.310E+00.                     |
 +--------------------------------------------------------------------+

======================================================================
 OUTER LOOP ITERATION =    4                    CPU SECONDS = 1.876E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.41 | 1.6E-05 | 6.6E-04 | 43.0  9.7E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 2.04 | 2.0E-03 | 2.6E-01 |       3.6E-02  OK|
 | V-Mom                | 2.49 | 1.5E-02 | 1.3E+00 |       2.8E-02  OK|
 | W-Mom                | 1.70 | 1.2E-02 | 1.1E+00 |       1.1E-01  ok|
 | P-Mass               | 1.86 | 1.4E-02 | 2.0E+00 | 21.4  1.0E-01  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  15.6% of the faces,   8.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.41 | 6.5E-03 | 3.1E-01 |  5.7  4.2E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.73 | 1.8E-02 | 5.5E-01 |  5.7  1.9E-02  OK|
 | O-TurbFreq           | 0.49 | 1.5E-02 | 6.1E-01 |  7.8  1.9E-02  OK|
 +----------------------+------+---------+---------+------------------+
 +--------------------------------------------------------------------+
 | Notice: The maximum Mach number is  2.517E+02.                     |
 +--------------------------------------------------------------------+

======================================================================
 OUTER LOOP ITERATION =    5                    CPU SECONDS = 2.440E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.42 | 6.9E-06 | 3.4E-04 | 43.0  9.1E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 1.20 | 2.4E-03 | 2.2E-01 |       9.5E-03  OK|
 | V-Mom                | 1.29 | 2.0E-02 | 1.6E+00 |       6.3E-03  OK|
 | W-Mom                | 1.17 | 1.4E-02 | 1.3E+00 |       3.3E-03  OK|
 | P-Mass               | 0.07 | 9.5E-04 | 1.1E-01 | 13.2  4.9E-02  OK|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  14.5% of the faces,   8.5% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at  39.6% of the faces,  53.8% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.66 | 4.3E-03 | 6.4E-01 |  5.7  3.0E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.58 | 1.0E-02 | 5.0E-01 |  5.7  4.0E-02  OK|
 | O-TurbFreq           | 0.63 | 9.2E-03 | 9.1E-01 |  7.8  6.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 +--------------------------------------------------------------------+
 | Notice: The maximum Mach number is  2.052E+02.                     |
 +--------------------------------------------------------------------+

======================================================================
 OUTER LOOP ITERATION =    6                    CPU SECONDS = 2.894E+03
 ----------------------------------------------------------------------
 |       Equation       | Rate | RMS Res | Max Res |  Linear Solution |
 +----------------------+------+---------+---------+------------------+
 | Wallscale            | 0.43 | 3.0E-06 | 1.7E-04 | 38.3  1.0E-01  OK|
 +----------------------+------+---------+---------+------------------+
 | U-Mom                | 0.92 | 2.2E-03 | 1.5E-01 |       1.8E-01  ok|
 | V-Mom                | 0.74 | 1.5E-02 | 1.2E+00 |       1.0E-01  ok|
 | W-Mom                | 0.68 | 9.2E-03 | 9.5E-01 |       7.1E-02  OK|
 | P-Mass               | 1.16 | 1.1E-03 | 1.8E-01 |  9.1  8.2E-01  ok|
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an INLET                  |
 |  boundary condition (at  14.3% of the faces,   8.6% of the area)   |
 |  to prevent fluid from flowing out of the domain.                  |
 |  The boundary condition name is: R1 Inlet.                         |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +--------------------------------------------------------------------+
 |                     ****** Notice ******                           |
 |  A wall has been placed at portion(s) of an OUTLET                 |
 |  boundary condition (at  52.8% of the faces,  73.1% of the area)   |
 |  to prevent fluid from flowing into the domain.                    |
 |  The boundary condition name is: S3 Outlet.                        |
 |  The fluid name is: Air Ideal Gas.                                 |
 |  If this situation persists, consider switching                    |
 |  to an Opening type boundary condition instead.                    |
 +--------------------------------------------------------------------+
 +----------------------+------+---------+---------+------------------+
 | H-Energy             | 0.77 | 3.3E-03 | 4.5E-01 |  5.7  7.6E-02  OK|
 +----------------------+------+---------+---------+------------------+
 | K-TurbKE             | 0.92 | 9.4E-03 | 9.7E-01 |  5.7  6.0E-02  OK|
 | O-TurbFreq           | 0.90 | 8.2E-03 | 9.4E-01 |  7.8  6.6E-02  OK|
 +----------------------+------+---------+---------+------------------+

Execution terminating: STP file found.

+--------------------------------------------------------------------+
 | Notice: The maximum Mach number is  7.166E+02.                     |
 +--------------------------------------------------------------------+
                   
 CFD Solver finished: Mon Jul 15 16:30:01 2024
 CFD Solver wall clock seconds: 1.5208E+03

+--------------------------------------------------------------------+
 |                              U-Mom-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Blade                               -1.4033E+01
 Boundary         : R1 Hub                                  9.9890E+01
 Boundary         : R1 Inlet                               -1.0133E-05
 Boundary         : R1 Shroud                              -2.1039E+02
 Boundary         : Periodic                                9.5585E+01
 Domain Src (Neg) : R1                                     -3.8210E-01
 Domain Src (Pos) : R1                                      4.8490E+01
 Domain Interface : S1 to R1 (Side 2)                      -9.6162E+00
                                                           -----------
 Domain Imbalance :                                         9.5406E+00

+--------------------------------------------------------------------+
 |                              V-Mom-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Blade                                1.5335E+02
 Boundary         : R1 Hub                                  2.8958E+00
 Boundary         : R1 Inlet                                1.9881E-03
 Boundary         : R1 Shroud                              -1.5209E+01
 Boundary         : Periodic                                1.1873E+01
 Domain Src (Neg) : R1                                     -6.2886E+00
 Domain Src (Pos) : R1                                      1.2829E+00
 Domain Interface : S1 to R1 (Side 2)                      -6.8050E+01
                                                           -----------
 Domain Imbalance :                                         7.9853E+01

+--------------------------------------------------------------------+
 |                              W-Mom-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Blade                                4.9575E+01
 Boundary         : R1 Hub                                 -2.5809E+01
 Boundary         : R1 Inlet                                3.5575E+02
 Boundary         : R1 Shroud                              -8.5909E-02
 Boundary         : Periodic                                7.1054E-13
 Domain Interface : S1 to R1 (Side 2)                      -3.9568E+02
                                                           -----------
 Domain Imbalance :                                        -1.6255E+01

+--------------------------------------------------------------------+
 |                             P-Mass-R1                              |
 +--------------------------------------------------------------------+
 Boundary         : R1 Inlet                                4.5327E-01
 Domain Interface : S1 to R1 (Side 2)                      -4.3687E-01
                                                           -----------
 Domain Imbalance :                                         1.6403E-02

+--------------------------------------------------------------------+
 |                              U-Mom-S1                              |
 +--------------------------------------------------------------------+
 Boundary         : S1 Blade                                4.1928E-01
 Boundary         : S1 Hub                                  7.7550E+01
 Boundary         : S1 Shroud                              -1.6954E+02
 Boundary         : Periodic                                7.9918E+01
 Domain Interface : S1 to R1 (Side 1)                       8.7507E+00
 Domain Interface : R2 to S1 (Side 2)                       1.4876E+00
                                                           -----------
 Domain Imbalance :                                        -1.4191E+00

+--------------------------------------------------------------------+
 |                              V-Mom-S1                              |
 +--------------------------------------------------------------------+
 Boundary         : S1 Blade                               -1.9388E+01
 Boundary         : S1 Hub                                  1.4441E+01
 Boundary         : S1 Shroud                              -1.0371E+01
 Boundary         : Periodic                               -7.4612E+00
 Domain Interface : S1 to R1 (Side 1)                       7.3106E+01
 Domain Interface : R2 to S1 (Side 2)                      -1.2005E+01
                                                           -----------
 Domain Imbalance :                                         3.8322E+01

+--------------------------------------------------------------------+
 |                              W-Mom-S1                              |
 +--------------------------------------------------------------------+
 Boundary         : S1 Blade                               -4.1605E+01
 Boundary         : S1 Hub                                 -2.0215E+01
 Boundary         : S1 Shroud                              -8.6868E-02
 Boundary         : Periodic                                7.8160E-14
 Domain Interface : S1 to R1 (Side 1)                       3.9931E+02
 Domain Interface : R2 to S1 (Side 2)                      -2.9680E+02
                                                           -----------
 Domain Imbalance :                                         4.0597E+01

+--------------------------------------------------------------------+
 |                             P-Mass-S1                              |
 +--------------------------------------------------------------------+
 Domain Interface : S1 to R1 (Side 1)                       4.3700E-01
 Domain Interface : R2 to S1 (Side 2)                      -4.4040E-01
                                                           -----------
 Domain Imbalance :                                        -3.3981E-03

+--------------------------------------------------------------------+
 |                              U-Mom-R2                              |
 +--------------------------------------------------------------------+
 Boundary         : R2 Blade                               -1.3812E+01
 Boundary         : R2 Hub                                  1.0348E+02
 Boundary         : R2 Shroud                              -1.8847E+02
 Boundary         : Periodic                                5.7785E+01
 Domain Src (Neg) : R2                                     -3.3141E-01
 Domain Src (Pos) : R2                                      3.3817E+01
 Domain Interface : R2 to S1 (Side 1)                      -1.3854E+00
 Domain Interface : S2 to R2 (Side 2)                      -2.6914E+00
                                                           -----------
 Domain Imbalance :                                        -1.1608E+01

+--------------------------------------------------------------------+
 |                              V-Mom-R2                              |
 +--------------------------------------------------------------------+
 Boundary         : R2 Blade                                1.5196E+02
 Boundary         : R2 Hub                                  5.7791E+00
 Boundary         : R2 Shroud                              -1.5084E+01
 Boundary         : Periodic                                7.4762E+00
 Domain Src (Neg) : R2                                     -2.3383E+00
 Domain Src (Pos) : R2                                      1.7185E+00
 Domain Interface : R2 to S1 (Side 1)                       9.6742E+00
 Domain Interface : S2 to R2 (Side 2)                      -8.5054E+01
                                                           -----------
 Domain Imbalance :                                         7.4134E+01

+--------------------------------------------------------------------+
 |                              W-Mom-R2                              |
 +--------------------------------------------------------------------+
 Boundary         : R2 Blade                                2.2692E+01
 Boundary         : R2 Hub                                 -2.1027E+01
 Boundary         : R2 Shroud                              -1.1322E-01
 Boundary         : Periodic                               -1.8474E-12
 Domain Interface : R2 to S1 (Side 1)                       2.7190E+02
 Domain Interface : S2 to R2 (Side 2)                      -3.0968E+02
                                                           -----------
 Domain Imbalance :                                        -3.6232E+01

+--------------------------------------------------------------------+
 |                             P-Mass-R2                              |
 +--------------------------------------------------------------------+
 Domain Interface : R2 to S1 (Side 1)                       4.0210E-01
 Domain Interface : S2 to R2 (Side 2)                      -3.8769E-01
                                                           -----------
 Domain Imbalance :                                         1.4416E-02

+--------------------------------------------------------------------+
 |                              U-Mom-S2                              |
 +--------------------------------------------------------------------+
 Boundary         : S2 Blade                               -1.5154E+00
 Boundary         : S2 Hub                                  1.0469E+02
 Boundary         : S2 Shroud                              -1.6580E+02
 Boundary         : Periodic                                6.5204E+01
 Domain Interface : S2 to R2 (Side 1)                       2.2821E+00
 Domain Interface : R3 to S2 (Side 2)                      -4.2077E+00
                                                           -----------
 Domain Imbalance :                                         6.5286E-01

+--------------------------------------------------------------------+
 |                              V-Mom-S2                              |
 +--------------------------------------------------------------------+
 Boundary         : S2 Blade                               -3.8730E+01
 Boundary         : S2 Hub                                  1.3053E+01
 Boundary         : S2 Shroud                              -1.1334E+01
 Boundary         : Periodic                               -2.8723E+00
 Domain Interface : S2 to R2 (Side 1)                       8.7864E+01
 Domain Interface : R3 to S2 (Side 2)                      -9.5698E+00
                                                           -----------
 Domain Imbalance :                                         3.8411E+01

+--------------------------------------------------------------------+
 |                              W-Mom-S2                              |
 +--------------------------------------------------------------------+
 Boundary         : S2 Blade                               -1.0174E+01
 Boundary         : S2 Hub                                 -1.7843E+01
 Boundary         : S2 Shroud                              -1.2145E-01
 Boundary         : Periodic                                8.1712E-13
 Domain Interface : S2 to R2 (Side 1)                       3.1196E+02
 Domain Interface : R3 to S2 (Side 2)                      -2.6269E+02
                                                           -----------
 Domain Imbalance :                                         2.1132E+01

+--------------------------------------------------------------------+
 |                             P-Mass-S2                              |
 +--------------------------------------------------------------------+
 Domain Interface : S2 to R2 (Side 1)                       3.9222E-01
 Domain Interface : R3 to S2 (Side 2)                      -4.1825E-01
                                                           -----------
 Domain Imbalance :                                        -2.6032E-02

+--------------------------------------------------------------------+
 |                              U-Mom-R3                              |
 +--------------------------------------------------------------------+
 Boundary         : R3 Blade                               -3.7059E+00
 Boundary         : R3 Hub                                  1.1685E+02
 Boundary         : R3 Shroud                              -2.2763E+02
 Boundary         : Periodic                                5.1015E+01
 Domain Src (Neg) : R3                                     -1.7632E-01
 Domain Src (Pos) : R3                                      4.1161E+01
 Domain Interface : R3 to S2 (Side 1)                       4.1650E+00
 Domain Interface : S3 to R3 (Side 2)                       1.5301E+00
                                                           -----------
 Domain Imbalance :                                        -1.6793E+01

+--------------------------------------------------------------------+
 |                              V-Mom-R3                              |
 +--------------------------------------------------------------------+
 Boundary         : R3 Blade                                2.1436E+02
 Boundary         : R3 Hub                                  1.2110E+01
 Boundary         : R3 Shroud                              -2.1194E+01
 Boundary         : Periodic                                3.0702E+00
 Domain Src (Neg) : R3                                     -2.2307E+00
 Domain Src (Pos) : R3                                      2.1109E+00
 Domain Interface : R3 to S2 (Side 1)                       7.9331E+00
 Domain Interface : S3 to R3 (Side 2)                      -1.1929E+02
                                                           -----------
 Domain Imbalance :                                         9.6869E+01

+--------------------------------------------------------------------+
 |                              W-Mom-R3                              |
 +--------------------------------------------------------------------+
 Boundary         : R3 Blade                               -3.1998E+01
 Boundary         : R3 Hub                                 -1.7565E+01
 Boundary         : R3 Shroud                              -1.1992E-01
 Boundary         : Periodic                                6.6613E-14
 Domain Interface : R3 to S2 (Side 1)                       2.4565E+02
 Domain Interface : S3 to R3 (Side 2)                      -2.5465E+02
                                                           -----------
 Domain Imbalance :                                        -5.8688E+01

+--------------------------------------------------------------------+
 |                             P-Mass-R3                              |
 +--------------------------------------------------------------------+
 Domain Interface : R3 to S2 (Side 1)                       3.9122E-01
 Domain Interface : S3 to R3 (Side 2)                      -3.7371E-01
                                                           -----------
 Domain Imbalance :                                         1.7513E-02

+--------------------------------------------------------------------+
 |                              U-Mom-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Blade                                7.7099E+00
 Boundary         : S3 Hub                                  1.0253E+02
 Boundary         : S3 Outlet                              -5.0475E+01
 Boundary         : S3 Shroud                              -1.6264E+02
 Boundary         : Periodic                                5.0545E+01
 Domain Interface : S3 to R3 (Side 1)                       1.0652E+00
                                                           -----------
 Domain Imbalance :                                        -5.1267E+01

+--------------------------------------------------------------------+
 |                              V-Mom-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Blade                               -7.4610E+01
 Boundary         : S3 Hub                                  8.8482E+00
 Boundary         : S3 Outlet                               7.1213E+02
 Boundary         : S3 Shroud                              -1.2495E+01
 Boundary         : Periodic                                2.4776E+00
 Domain Interface : S3 to R3 (Side 1)                       1.2848E+02
                                                           -----------
 Domain Imbalance :                                         7.6483E+02

+--------------------------------------------------------------------+
 |                              W-Mom-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Blade                               -9.6287E+00
 Boundary         : S3 Hub                                 -7.8477E+00
 Boundary         : S3 Outlet                              -7.8727E+03
 Boundary         : S3 Shroud                              -2.0836E-01
 Boundary         : Periodic                                1.7142E-12
 Domain Interface : S3 to R3 (Side 1)                       2.6121E+02
                                                           -----------
 Domain Imbalance :                                        -7.6292E+03

+--------------------------------------------------------------------+
 |                             P-Mass-S3                              |
 +--------------------------------------------------------------------+
 Boundary         : S3 Outlet                              -5.2000E-01
 Domain Interface : S3 to R3 (Side 1)                       3.9092E-01
                                                           -----------
 Domain Imbalance :                                        -1.2908E-01

+--------------------------------------------------------------------+
 |                            H-Energy-R1                             |
 +--------------------------------------------------------------------+
 Boundary         : R1 Inlet                               -4.6435E+03
 Bnd Src/Visc Work: R1 Inlet                               -3.2468E-01
 Bnd Src/Visc Work: S1 to R1 Side 2                         7.0160E+00
 Domain Src (Neg) : R1                                     -1.0963E+03
 Domain Src (Pos) : R1                                      1.0963E+03
 Domain Interface : S1 to R1 (Side 2)                       1.2839E+03
                                                           -----------
 Domain Imbalance :                                        -3.3529E+03

+--------------------------------------------------------------------+
 |                            H-Energy-S1                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R2 to S1 Side 2                         1.3492E-01
 Bnd Src/Visc Work: S1 to R1 Side 1                         3.8180E+01
 Domain Src (Neg) : S1                                     -3.9720E+02
 Domain Src (Pos) : S1                                      3.9720E+02
 Domain Interface : S1 to R1 (Side 1)                       2.1172E+04
 Domain Interface : R2 to S1 (Side 2)                      -3.7511E+03
                                                           -----------
 Domain Imbalance :                                         1.7459E+04

+--------------------------------------------------------------------+
 |                            H-Energy-R2                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R2 to S1 Side 1                         1.1730E+00
 Bnd Src/Visc Work: S2 to R2 Side 2                         5.1386E+00
 Domain Src (Neg) : R2                                     -7.3744E+02
 Domain Src (Pos) : R2                                      7.3744E+02
 Domain Interface : R2 to S1 (Side 1)                      -7.3085E+01
 Domain Interface : S2 to R2 (Side 2)                      -2.1817E+03
                                                           -----------
 Domain Imbalance :                                        -2.2485E+03

+--------------------------------------------------------------------+
 |                            H-Energy-S2                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R3 to S2 Side 2                         9.5238E-01
 Bnd Src/Visc Work: S2 to R2 Side 1                         1.3051E+01
 Domain Src (Neg) : S2                                     -4.5366E+02
 Domain Src (Pos) : S2                                      4.5366E+02
 Domain Interface : S2 to R2 (Side 1)                       2.8398E+04
 Domain Interface : R3 to S2 (Side 2)                      -1.1407E+04
                                                           -----------
 Domain Imbalance :                                         1.7005E+04

+--------------------------------------------------------------------+
 |                            H-Energy-R3                             |
 +--------------------------------------------------------------------+
 Bnd Src/Visc Work: R3 to S2 Side 1                         7.2723E-01
 Bnd Src/Visc Work: S3 to R3 Side 2                         5.3575E+00
 Domain Src (Neg) : R3                                     -7.3818E+02
 Domain Src (Pos) : R3                                      7.3818E+02
 Domain Interface : R3 to S2 (Side 1)                       8.5538E+03
 Domain Interface : S3 to R3 (Side 2)                      -5.6990E+03
                                                           -----------
 Domain Imbalance :                                         2.8609E+03

+--------------------------------------------------------------------+
 |                            H-Energy-S3                             |
 +--------------------------------------------------------------------+
 Boundary         : S3 Outlet                              -1.1062E+04
 Bnd Src/Visc Work: S3 Outlet                               5.2505E+03
 Bnd Src/Visc Work: S3 to R3 Side 1                         8.2157E+00
 Domain Src (Neg) : S3                                     -2.1555E+05
 Domain Src (Pos) : S3                                      2.1555E+05
 Domain Interface : S3 to R3 (Side 1)                       4.7718E+04
                                                           -----------
 Domain Imbalance :                                         4.1915E+04

+--------------------------------------------------------------------+
 |                     Normalised Imbalance Summary                   |
 +--------------------------------------------------------------------+
 |       Equation       |      Maximum Flow     |     Imbalance (%)   |
 +--------------------------------------------------------------------+
 | U-Mom-R1             |       7.8727E+03      |        0.1212       |
 | V-Mom-R1             |       7.8727E+03      |        1.0143       |
 | W-Mom-R1             |       7.8727E+03      |       -0.2065       |
 | P-Mass-R1            |       5.2000E-01      |        3.1544       |
 | U-Mom-S1             |       7.8727E+03      |       -0.0180       |
 | V-Mom-S1             |       7.8727E+03      |        0.4868       |
 | W-Mom-S1             |       7.8727E+03      |        0.5157       |
 | P-Mass-S1            |       5.2000E-01      |       -0.6535       |
 | U-Mom-R2             |       7.8727E+03      |       -0.1474       |
 | V-Mom-R2             |       7.8727E+03      |        0.9417       |
 | W-Mom-R2             |       7.8727E+03      |       -0.4602       |
 | P-Mass-R2            |       5.2000E-01      |        2.7722       |
 | U-Mom-S2             |       7.8727E+03      |        0.0083       |
 | V-Mom-S2             |       7.8727E+03      |        0.4879       |
 | W-Mom-S2             |       7.8727E+03      |        0.2684       |
 | P-Mass-S2            |       5.2000E-01      |       -5.0062       |
 | U-Mom-R3             |       7.8727E+03      |       -0.2133       |
 | V-Mom-R3             |       7.8727E+03      |        1.2304       |
 | W-Mom-R3             |       7.8727E+03      |       -0.7455       |
 | P-Mass-R3            |       5.2000E-01      |        3.3679       |
 | U-Mom-S3             |       7.8727E+03      |       -0.6512       |
 | V-Mom-S3             |       7.8727E+03      |        9.7148       |
 | W-Mom-S3             |       7.8727E+03      |      -96.9067       |
 | P-Mass-S3            |       5.2000E-01      |      -24.8235       |
 +----------------------+-----------------------+---------------------+
 | H-Energy-R1          |       2.1555E+05      |       -1.5555       |
 | H-Energy-S1          |       2.1555E+05      |        8.0998       |
 | H-Energy-R2          |       2.1555E+05      |       -1.0432       |
 | H-Energy-S2          |       2.1555E+05      |        7.8892       |
 | H-Energy-R3          |       2.1555E+05      |        1.3273       |
 | H-Energy-S3          |       2.1555E+05      |       19.4458       |
 +----------------------+-----------------------+---------------------+

Domain Group: R1

R1 Blade                         1.3957E+01  -1.5122E+02  -5.2029E+01
 R1 Hub                          -9.9898E+01  -2.8782E+00   2.5783E+01
 R1 Shroud                        2.1039E+02   1.5306E+01   3.1501E-04
 S1 Blade                        -6.0036E-01   1.8379E+01   3.9643E+01
 S1 Hub                          -7.7556E+01  -1.4446E+01   2.0192E+01
 S1 Shroud                        1.6955E+02   1.0344E+01   7.2424E-05
 R2 Blade                         1.3758E+01  -1.5045E+02  -2.5114E+01
 R2 Hub                          -1.0349E+02  -5.7481E+00   2.0970E+01
 R2 Shroud                        1.8846E+02   1.5175E+01   2.0387E-04
 S2 Blade                         1.3637E+00   3.7789E+01   8.1118E+00
 S2 Hub                          -1.0470E+02  -1.3069E+01   1.7778E+01
 S2 Shroud                        1.6581E+02   1.1300E+01   2.3377E-04
 R3 Blade                         3.3958E+00  -2.1374E+02   2.9545E+01
 R3 Hub                          -1.1687E+02  -1.2090E+01   1.7445E+01
 R3 Shroud                        2.2763E+02   2.1239E+01  -5.7133E-05
 S3 Blade                        -7.7807E+00   7.6246E+01   4.4247E+00
 S3 Hub                          -1.0254E+02  -8.8219E+00   7.7036E+00
 S3 Shroud                        1.6264E+02   1.2495E+01   1.9492E-04
                                  -----------  -----------  -----------
 Domain Group Totals :            5.4350E+02  -3.5419E+02   1.1445E+02

Domain Group: R1

R1 Blade                         7.5930E-02  -2.1270E+00   2.4538E+00
 R1 Hub                           7.4340E-03  -1.7514E-02   2.5579E-02
 R1 Shroud                        7.7311E-03  -9.7127E-02   8.5594E-02
 S1 Blade                         1.8108E-01   1.0087E+00   1.9619E+00
 S1 Hub                           5.1814E-03   4.9440E-03   2.3526E-02
 S1 Shroud                       -1.3758E-03   2.7638E-02   8.6796E-02
 R2 Blade                         5.4103E-02  -1.5092E+00   2.4224E+00
 R2 Hub                           1.3996E-02  -3.1016E-02   5.6794E-02
 R2 Shroud                        7.5962E-03  -9.1024E-02   1.1302E-01
 S2 Blade                         1.5163E-01   9.4184E-01   2.0619E+00
 S2 Hub                           9.6263E-03   1.5822E-02   6.5730E-02
 S2 Shroud                       -1.9900E-03   3.3839E-02   1.2121E-01
 R3 Blade                         3.1002E-01  -6.2101E-01   2.4526E+00
 R3 Hub                           2.0472E-02  -1.9720E-02   1.1986E-01
 R3 Shroud                        8.4361E-04  -4.5419E-02   1.1997E-01
 S3 Blade                         7.0824E-02  -1.6351E+00   5.2040E+00
 S3 Hub                           1.2474E-02  -2.6265E-02   1.4409E-01
 S3 Shroud                        1.0560E-03  -2.7019E-04   2.0816E-01
                                  -----------  -----------  -----------
 Domain Group Totals :            9.2663E-01  -4.1880E+00   1.7727E+01

Domain Group: R1

R1 Blade                         2.4426E+00   6.6117E+00  -2.0269E+01
 R1 Hub                           7.5021E-02  -4.3946E+00   1.7958E-06
 R1 Shroud                       -3.2377E-01   4.9189E+00   1.2167E-04
 S1 Blade                        -1.2796E+00  -4.2969E+00   2.4280E+00
 S1 Hub                           1.2589E+00  -6.6465E+00  -1.7006E-05
 S1 Shroud                       -6.4811E-01   1.0232E+01  -5.6312E-06
 R2 Blade                         1.5390E+01   4.6082E+00  -2.0852E+01
 R2 Hub                           6.7414E-01  -1.2838E+01  -5.0419E-06
 R2 Shroud                       -1.5544E+00   1.9642E+01   1.3508E-04
 S2 Blade                        -5.7862E+00  -6.1044E-01   5.2733E+00
 S2 Hub                           2.1619E+00  -1.6984E+01   6.3299E-07
 S2 Shroud                       -1.6416E+00   2.3718E+01  -3.0482E-05
 R3 Blade                         4.1331E+01  -3.5600E+00  -3.0139E+01
 R3 Hub                           2.4873E+00  -2.4142E+01  -3.4434E-05
 R3 Shroud                       -4.0677E+00   4.3704E+01   1.4806E-04
 S3 Blade                        -1.7860E+01  -2.4205E+00   1.0890E+01
 S3 Hub                           2.1350E+00  -2.4750E+01   1.3545E-05
 S3 Shroud                       -2.8998E+00   3.7708E+01  -3.1281E-05
                                  -----------  -----------  -----------
 Domain Group Totals :            3.1895E+01   5.0500E+01  -5.2669E+01

Domain Group: R1

R1 Blade                         2.8206E-02  -3.0247E-01  -2.7236E-01
 R1 Hub                           4.0441E-04  -1.9206E-03  -1.4366E-03
 R1 Shroud                        2.7913E-03  -1.3645E-02  -1.5849E-02
 S1 Blade                        -2.2884E-02  -2.3724E-01   1.2282E-01
 S1 Hub                           2.2494E-04  -1.7814E-03   3.3018E-04
 S1 Shroud                       -6.2986E-04  -1.4043E-02   4.5006E-03
 R2 Blade                         1.5326E-01  -3.1555E-01  -2.0203E-01
 R2 Hub                           3.3089E-03  -4.3083E-03  -3.1827E-03
 R2 Shroud                        1.0276E-02  -1.7456E-02  -1.4847E-02
 S2 Blade                        -9.9341E-02  -2.5532E-01   1.2282E-01
 S2 Hub                          -1.0378E-03  -5.6236E-03   1.5215E-03
 S2 Shroud                       -2.9630E-03  -1.9760E-02   5.5104E-03
 R3 Blade                         1.2904E-01  -2.7939E-01  -9.0499E-02
 R3 Hub                           4.4470E-03  -9.8434E-03  -2.3924E-03
 R3 Shroud                        8.4558E-03  -1.9330E-02  -7.3698E-03
 S3 Blade                         4.9021E-01  -7.1835E-01  -2.3279E-01
 S3 Hub                           8.9290E-03  -1.4176E-02  -3.3555E-03
 S3 Shroud                        4.6152E-03  -3.3103E-02  -4.8993E-05
                                  -----------  -----------  -----------
 Domain Group Totals :            7.1731E-01  -2.2633E+00  -5.8865E-01

+--------------------------------------------------------------------+
 |                   Locations of Maximum Residuals                   |
 +--------------------------------------------------------------------+
 |       Equation       |      Domain Name      |     Node Number     |
 +--------------------------------------------------------------------+
 | Wallscale            | R1                    |        1075654      |
 +----------------------+-----------------------+---------------------+
 | U-Mom                | R3                    |         212664      |
 | V-Mom                | R3                    |         931779      |
 | W-Mom                | R3                    |         931779      |
 | P-Mass               | R3                    |         931780      |
 +----------------------+-----------------------+---------------------+
 | H-Energy             | S3                    |          69968      |
 +----------------------+-----------------------+---------------------+
 | K-TurbKE             | S3                    |         910288      |
 | O-TurbFreq           | S3                    |          69915      |
 +----------------------+-----------------------+---------------------+

Domain Name : R1
     Global Length                                         = 4.8212E-02
     Minimum Extent                                        = 4.1500E-02
     Maximum Extent                                        = 8.9697E-02
     Density                                               = 1.2156E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.1836E+02
     Advection Time                                        = 2.2079E-04
     Reynolds Number                                       = 6.9895E+05
     Speed of Sound                                        = 3.4508E+02
     Mach Number                                           = 6.3279E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 2.2445E+02

Domain Name : R2
     Global Length                                         = 4.4113E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 6.8992E-02
     Density                                               = 1.1193E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.5085E+02
     Advection Time                                        = 1.7585E-04
     Reynolds Number                                       = 6.7644E+05
     Speed of Sound                                        = 3.4969E+02
     Mach Number                                           = 7.1735E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 2.3525E+02

Domain Name : R3
     Global Length                                         = 4.1170E-02
     Minimum Extent                                        = 4.5034E-02
     Maximum Extent                                        = 5.4118E-02
     Density                                               = 1.2419E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.8249E+02
     Advection Time                                        = 1.4574E-04
     Reynolds Number                                       = 7.8883E+05
     Speed of Sound                                        = 3.5458E+02
     Mach Number                                           = 7.9669E-01

+--------------------------------------------------------------------+
 | The High Speed Model for turbulent wall functions is disabled for  |
 | a high-Mach number flow with "Total Energy" heat transfer model.   |
 | Consider turning on the High Speed (compressible) Wall Heat        |
 | Transfer Model for this domain and fluid.  Execution will proceed. |
 |                                                                    |
 | Domain Name      : R3                                              |
 | Fluid Name       : Air Ideal Gas                                   |
 | Max. Mach Number = 3.2975E+00                                      |
 +--------------------------------------------------------------------+
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 2.8656E+02

Domain Name : S1
     Global Length                                         = 4.5427E-02
     Minimum Extent                                        = 3.8500E-02
     Maximum Extent                                        = 7.8332E-02
     Density                                               = 1.0629E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.1234E+02
     Advection Time                                        = 2.1393E-04
     Reynolds Number                                       = 5.5996E+05
     Speed of Sound                                        = 3.4572E+02
     Mach Number                                           = 6.1421E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 1.2356E+02

Domain Name : S2
     Global Length                                         = 4.2664E-02
     Minimum Extent                                        = 4.2500E-02
     Maximum Extent                                        = 5.9282E-02
     Density                                               = 1.0183E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.4559E+02
     Advection Time                                        = 1.7372E-04
     Reynolds Number                                       = 5.8273E+05
     Speed of Sound                                        = 3.5309E+02
     Mach Number                                           = 6.9556E-01
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 1.3487E+02

Domain Name : S3
     Global Length                                         = 3.9060E-02
     Minimum Extent                                        = 4.3000E-02
     Maximum Extent                                        = 4.6403E-02
     Density                                               = 9.9000E+00
     Dynamic Viscosity                                     = 1.8310E-05
     Velocity                                              = 2.5776E+03
     Advection Time                                        = 1.5153E-05
     Reynolds Number                                       = 5.4437E+07
     Speed of Sound                                        = 3.4595E+02
     Mach Number                                           = 7.4508E+00

+--------------------------------------------------------------------+
 | The High Speed Model for turbulent wall functions is disabled for  |
 | a high-Mach number flow with "Total Energy" heat transfer model.   |
 | Consider turning on the High Speed (compressible) Wall Heat        |
 | Transfer Model for this domain and fluid.  Execution will proceed. |
 |                                                                    |
 | Domain Name      : S3                                              |
 | Fluid Name       : Air Ideal Gas                                   |
 | Max. Mach Number = 7.1662E+02                                      |
 +--------------------------------------------------------------------+
     Thermal Conductivity                                  = 2.6100E-02
     Specific Heat Capacity at Constant Pressure           = 1.0044E+03
     Specific Heat Capacity at Constant Volume             = 7.1730E+02
     Specific Heat Ratio                                   = 1.4003E+00
     Prandtl Number                                        = 7.0462E-01
     Temperature Range                                     = 1.4533E+04

Domain Name : R1
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  5.06E-01 |  3.15E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Isothermal Compressibility                 |  3.27E-06 |  1.86E-05 |
 | Static Entropy                             | -4.88E+02 |  4.01E+02 |
 | Velocity u                                 | -1.50E+02 |  1.74E+02 |
 | Velocity v                                 | -6.92E+02 |  5.60E+02 |
 | Velocity w                                 | -3.46E+02 |  4.37E+02 |
 | Pressure                                   |  5.38E+04 |  3.06E+05 |
 | Turbulence Kinetic Energy                  |  6.17E-09 |  6.95E+02 |
 | Turbulence Eddy Frequency                  |  7.76E+03 |  3.39E+08 |
 | Eddy Viscosity                             |  1.29E-15 |  4.99E-03 |
 | Temperature                                |  1.53E+02 |  3.78E+02 |
 | Static Enthalpy                            | -1.46E+05 |  7.97E+04 |
 | Total Enthalpy                             | -3.94E+03 |  7.99E+04 |
 | Wall Scale                                 | -6.01E-07 |  1.25E-04 |
 | Wall Distance                              |  0.00E+00 |  1.57E-02 |
 +--------------------------------------------------------------------+

Domain Name : R2
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  4.83E-01 |  3.72E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Isothermal Compressibility                 |  2.84E-06 |  1.86E-05 |
 | Static Entropy                             | -4.57E+02 |  4.47E+02 |
 | Velocity u                                 | -2.27E+02 |  1.80E+02 |
 | Velocity v                                 | -6.32E+02 |  5.63E+02 |
 | Velocity w                                 | -2.84E+02 |  4.53E+02 |
 | Pressure                                   |  5.38E+04 |  3.52E+05 |
 | Turbulence Kinetic Energy                  |  1.29E-07 |  7.96E+02 |
 | Turbulence Eddy Frequency                  |  1.54E+04 |  2.75E+08 |
 | Eddy Viscosity                             |  2.86E-14 |  5.73E-03 |
 | Temperature                                |  1.58E+02 |  3.93E+02 |
 | Static Enthalpy                            | -1.41E+05 |  9.55E+04 |
 | Total Enthalpy                             |  7.19E+03 |  1.24E+05 |
 | Wall Scale                                 | -1.25E-07 |  1.13E-04 |
 | Wall Distance                              |  0.00E+00 |  1.50E-02 |
 +--------------------------------------------------------------------+

Domain Name : R3
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  4.33E-01 |  1.06E+01 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Isothermal Compressibility                 |  1.10E-06 |  1.86E-05 |
 | Static Entropy                             | -7.94E+02 |  5.57E+02 |
 | Velocity u                                 | -3.38E+02 |  2.08E+02 |
 | Velocity v                                 | -5.96E+02 |  1.00E+03 |
 | Velocity w                                 | -7.23E+02 |  5.92E+02 |
 | Pressure                                   |  5.38E+04 |  9.05E+05 |
 | Turbulence Kinetic Energy                  |  4.00E-07 |  7.41E+02 |
 | Turbulence Eddy Frequency                  |  2.96E+04 |  3.05E+08 |
 | Eddy Viscosity                             |  1.39E-13 |  6.97E-03 |
 | Temperature                                |  1.82E+02 |  4.68E+02 |
 | Static Enthalpy                            | -1.17E+05 |  1.71E+05 |
 | Total Enthalpy                             | -3.24E+05 |  1.71E+05 |
 | Wall Scale                                 | -1.22E-11 |  1.04E-04 |
 | Wall Distance                              |  0.00E+00 |  1.39E-02 |
 +--------------------------------------------------------------------+

Domain Name : S1
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  5.92E-01 |  1.51E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Isothermal Compressibility                 |  6.75E-06 |  1.86E-05 |
 | Static Entropy                             | -6.27E+01 |  2.43E+02 |
 | Velocity u                                 | -8.25E+01 |  9.17E+01 |
 | Velocity v                                 | -1.54E+02 |  3.11E+02 |
 | Velocity w                                 | -1.12E+02 |  3.68E+02 |
 | Pressure                                   |  5.38E+04 |  1.48E+05 |
 | Turbulence Kinetic Energy                  |  5.73E-08 |  3.01E+02 |
 | Turbulence Eddy Frequency                  |  1.11E+04 |  2.51E+08 |
 | Eddy Viscosity                             |  1.77E-14 |  2.47E-03 |
 | Temperature                                |  2.39E+02 |  3.62E+02 |
 | Static Enthalpy                            | -5.98E+04 |  6.43E+04 |
 | Total Enthalpy                             | -3.29E+03 |  7.31E+04 |
 | Wall Scale                                 | -8.98E-08 |  1.17E-04 |
 | Wall Distance                              |  0.00E+00 |  1.52E-02 |
 +--------------------------------------------------------------------+

Domain Name : S2
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  5.67E-01 |  1.41E+00 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Isothermal Compressibility                 |  6.88E-06 |  1.86E-05 |
 | Static Entropy                             | -6.88E+01 |  2.98E+02 |
 | Velocity u                                 | -9.20E+01 |  9.74E+01 |
 | Velocity v                                 | -1.69E+02 |  4.17E+02 |
 | Velocity w                                 | -3.66E+02 |  3.77E+02 |
 | Pressure                                   |  5.38E+04 |  1.45E+05 |
 | Turbulence Kinetic Energy                  |  7.75E-08 |  2.76E+02 |
 | Turbulence Eddy Frequency                  |  2.05E+04 |  2.76E+08 |
 | Eddy Viscosity                             |  2.22E-14 |  2.80E-03 |
 | Temperature                                |  2.55E+02 |  3.90E+02 |
 | Static Enthalpy                            | -4.32E+04 |  9.22E+04 |
 | Total Enthalpy                             |  6.18E+03 |  1.07E+05 |
 | Wall Scale                                 | -1.57E-09 |  1.10E-04 |
 | Wall Distance                              |  0.00E+00 |  1.47E-02 |
 +--------------------------------------------------------------------+

Domain Name : S3
 +--------------------------------------------------------------------+
 |      Variable Name                         |    min    |    max    |
 +--------------------------------------------------------------------+
 | Density                                    |  1.70E-02 |  1.34E+04 |
 | Specific Heat Capacity at Constant Pressure|  1.00E+03 |  1.00E+03 |
 | Dynamic Viscosity                          |  1.83E-05 |  1.83E-05 |
 | Thermal Conductivity                       |  2.61E-02 |  2.61E-02 |
 | Isothermal Compressibility                 |  1.51E-09 |  1.86E-05 |
 | Static Entropy                             | -3.08E+03 |  4.01E+03 |
 | Velocity u                                 | -4.66E+03 |  1.05E+04 |
 | Velocity v                                 | -5.31E+04 |  1.01E+05 |
 | Velocity w                                 | -7.62E+04 |  1.72E+05 |
 | Pressure                                   |  5.38E+04 |  6.62E+08 |
 | Turbulence Kinetic Energy                  |  1.15E-06 |  1.20E+03 |
 | Turbulence Eddy Frequency                  |  2.88E+04 |  6.48E+09 |
 | Eddy Viscosity                             |  5.60E-13 |  2.67E-02 |
 | Temperature                                |  1.53E+02 |  1.47E+04 |
 | Static Enthalpy                            | -1.46E+05 |  1.45E+07 |
 | Total Enthalpy                             | -8.04E+05 |  1.55E+07 |
 | Wall Scale                                 | -3.99E-13 |  9.56E-05 |
 | Wall Distance                              |  0.00E+00 |  1.36E-02 |
 +--------------------------------------------------------------------+

Subsystem Name                  Discretization       Linear Solution
                                (secs.   %total)     (secs.   %total) 
 ----------------------------------------------------------------------
 Wall Scale                     1.08E+02   2.9 %     1.42E+02   3.8 %
 Momentum and Mass              7.51E+02  19.9 %     2.70E+02   7.2 %
 Heat Transfer                  1.93E+02   5.1 %     3.57E+01   0.9 %
 TurbKE and TurbFreq            2.02E+02   5.3 %     7.93E+01   2.1 %
                                -------- -------     --------  ------
 Subsystem Summary              1.25E+03  33.2 %     5.27E+02  14.0 %

GGI Intersection               1.64E-01    0.0 %
 File Reading                   3.10E+00    0.1 %
 Search Calculations            9.49E-02    0.0 %
 Variable Updates               1.07E+03   28.3 %
 File Writing                   2.37E+02    6.3 %
 Miscellaneous                  6.83E+02   18.1 %
                                --------
 Total                          3.77E+03

Job finished:   Mon Jul 15 16:33:30 2024

Total wall clock time: 1.886E+03 seconds
             or: (          0:         0:        31:    26.343 )
                 (       Days:     Hours:   Minutes:   Seconds )

--> Final synchronization point reached by all partitions.
End of solution stage.

+--------------------------------------------------------------------+
 | The results from this run of the ANSYS CFX Solver have been        |
 | written to C:/Users/Emre/Desktop/deneme/yer analizi/Analiz         |
 | 11_pending/dp0_CFX_Solution-1/Fluid Flow CFX_001.res               |
 +--------------------------------------------------------------------+

This run of the ANSYS CFX Solver has finished.

Comparer le texte

Affichage

Traitement

Untitled diff @keyframes loading-circle-spin { 100% { transform: rotate(360deg); } }

Untitled diff