比较文本

查找两个文本文件之间的差异

实时编辑器

折叠未更改行

关闭换行

视图

比对精度

语法高亮

Diffchecker Desktop 运行Diffchecker最安全的方式。获取Diffchecker桌面应用：您的差异永远不会离开您的电脑！获取桌面版

Untitled diff

创建于 7年前差异永不过期

34 删除

行
总计
删除

字符
总计
删除

要继续使用此功能，请升级到 Diffchecker Pro 查看价格

105 行

125 添加

行
总计
添加

字符
总计
添加

要继续使用此功能，请升级到 Diffchecker Pro 查看价格

196 行

#include <Arduino.h>

// original example code

#include <SPI.h>

#include <ADE9000RegMap.h>

#include <ADE9000API.h>

/*Basic initializations*/

ADE9000Class ade9000;

#define SPI_SPEED 5000000 //SPI Speed

#define CS_PIN 8 //8-->Arduino Zero. 16-->ESP8266

#define CS_PIN A2 // nucleo f411 boaard

#define ADE9000_RESET_PIN 5 //Reset Pin on HW

#define PM_1 4 //PM1 Pin: 4-->Arduino Zero. 15-->ESP8266

/*Structure decleration */

struct ActivePowerRegs powerRegs; // Declare powerRegs of type ActivePowerRegs to store Active Power Register data

struct CurrentRMSRegs curntRMSRegs; //Current RMS

struct VoltageRMSRegs vltgRMSRegs; //Voltage RMS

struct VoltageTHDRegs voltageTHDRegsnValues; //Voltage THD

struct ResampledWfbData resampledData; // Resampled Data

/*Function Decleration*/

void readRegisterData(void);

void readResampledData(void);

void resetADE9000(void);

void SetupADE9000New(void) {

ade9000.SPI_Write_16(ADDR_PGA_GAIN,0);

ade9000.SPI_Write_32(ADDR_CONFIG0,0);

ade9000.SPI_Write_16(ADDR_CONFIG1,0);

ade9000.SPI_Write_16(ADDR_CONFIG2,0);

ade9000.SPI_Write_16(ADDR_CONFIG3,0);

ade9000.SPI_Write_16(ADDR_ACCMODE,0);

ade9000.SPI_Write_16(ADDR_TEMP_CFG,0);

ade9000.SPI_Write_16(ADDR_ZX_LP_SEL,0);

ade9000.SPI_Write_32(ADDR_MASK0,0);

ade9000.SPI_Write_32(ADDR_MASK1,0);

ade9000.SPI_Write_32(ADDR_EVENT_MASK,0);

ade9000.SPI_Write_16(ADDR_WFB_CFG,0);

ade9000.SPI_Write_32(ADDR_VLEVEL,0);

ade9000.SPI_Write_32(ADDR_DICOEFF,0);

ade9000.SPI_Write_16(ADDR_EGY_TIME,0);

ade9000.SPI_Write_16(ADDR_EP_CFG,0);

ade9000.SPI_Write_16(ADDR_RUN,ADE9000_RUN_ON);

}

void setup()

{

Serial.begin(115200);

pinMode(PM_1, OUTPUT); //Set PM1 pin as output

digitalWrite(PM_1, LOW); //Set PM1 select pin low for PSM0 mode

pinMode(ADE9000_RESET_PIN, OUTPUT);

digitalWrite(ADE9000_RESET_PIN, HIGH);

void resetADE9000();

delay(1000);

ade9000.SPI_Init(SPI_SPEED,CS_PIN); //Initialize SPI

ade9000.SetupADE9000(); //Initialize ADE9000 registers according to values in ADE9000API.h

SetupADE9000New();

//ade9000.SPI_Write_16(ADDR_RUN,0x1); //Set RUN=1 to turn on DSP. Uncomment if SetupADE9000 function is not used

/* user code start */

// Identyfi ADE9000

Serial.print("ADE9000 id: ");

Serial.println(ade9000.SPI_Read_16(0x00000472), HEX);

// To set the waveform buffer, perform the following procedure:

// 1. Write 0x03F8 to WFB_CFB (Address 0x4A0) to configure the waveform.

uint16_t wfb_cfg_register = 0x03F8;

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 2. Write 0'0b0 to WF_IN_EN (Bit 12) to disable waveform in

// neutral channel to be read through the serial peripheral

// interface (SPI).

bitClear(wfb_cfg_register, 12);

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 3. Write 0'b11 to WF_SRC (Bits[9:8]) to enable current and

// voltage channel waveform samples processed at 8 kSPS by

// the DSP.

bitSet(wfb_cfg_register, 9);

bitSet(wfb_cfg_register, 8);

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 4. Write 0'b11 to WF_MODE (Bits[7:6]) to enable continuous

// fill on the buffer. See the ADE9000 Technical Reference

// Manual for more information on continuous filling mode.

bitSet(wfb_cfg_register, 7);

bitSet(wfb_cfg_register, 6);

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 5. Write 0'b1 to WF_CAP_SEL (Bit 5) to enable the fixed data

// rate sampling (noncoherent).

bitSet(wfb_cfg_register, 5);

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 6. Write 0'b1 to WF_CAP_EN (Bit 4) to start waveform

// capturer.

bitSet(wfb_cfg_register, 4);

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

Serial.println(wfb_cfg_register, HEX);

// 7. Write 0'b0000 for all channels to BURST_CHAN

// (Bits[3.0]) to select channels. See the ADE9000 data sheet

// for other channels.

bitClear(wfb_cfg_register, 3);

bitClear(wfb_cfg_register, 2);

bitClear(wfb_cfg_register, 1);

bitClear(wfb_cfg_register, 0);

ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// To execute this process, take the following steps:

// 1. Write 0x20000 to MASK0 (Address 0x405) to enable the page full interrupt.

ade9000.SPI_Write_32(ADDR_MASK0, 0x20000);

// 2. Write 0x8080 to WFB_PG_IRQWN (Address 0x4A1) to set the interrupt at Page 7 and Page 15.

ade9000.SPI_Write_16(ADDR_WFB_PG_IRQEN, 0x8080);

Serial.print("RUN Register: ");

Serial.println(ade9000.SPI_Read_16(ADDR_RUN),HEX);

}

void loop() {

readRegisterData();

// readRegisterData();

readResampledData();

delay(10000);

// delay(10000);

}

void readRegisterData()

{

/*Read and Print Specific Register using ADE9000 SPI Library */

Serial.print("AIRMS: ");

Serial.println(ade9000.SPI_Read_32(ADDR_AIRMS),HEX); // AIRMS

/*Read and Print RMS & WATT Register using ADE9000 Read Library*/

ade9000.ReadVoltageRMSRegs(&vltgRMSRegs); //Template to read Power registers from ADE9000 and store data in Arduino MCU

ade9000.ReadActivePowerRegs(&powerRegs);

Serial.print("AVRMS:");

Serial.println(vltgRMSRegs.VoltageRMSReg_A); //Print AVRMS register

Serial.print("AWATT:");

Serial.println(powerRegs.ActivePowerReg_A); //Print AWATT register

}

void readResampledData()

{

uint32_t temp;

// CLEAR INTERRUPTS, WRITE 0x20000 TO STATUS0

/*Read and Print Resampled data*/

ade9000.SPI_Write_32(ADDR_STATUS0, 0x20000);

/*Start the Resampling engine to acquire 4 cycles of resampled data*/

ade9000.SPI_Write_16(ADDR_WFB_CFG,0x1000);

while(digitalRead(pinNametoDigitalPin(PA_0))) {

ade9000.SPI_Write_16(ADDR_WFB_CFG,0x1010);

;

delay(100); //approximate time to fill the waveform buffer with 4 line cycles

}

/*Read Resampled data into Arduino Memory*/

// POLL STATUS0, BIT 17 PAGE FULL

ade9000.SPI_Burst_Read_Resampled_Wfb(0x800,WFB_ELEMENT_ARRAY_SIZE,&resampledData); // Burst read function

uint32_t status0 = 0;

while(1) {

for(temp=0;temp<WFB_ELEMENT_ARRAY_SIZE;temp++)

status0 = ade9000.SPI_Read_32(ADDR_STATUS0);

{

// IS PAGE FULL INTERRUPT (BIT 17 IN STATUS0) TRUE?

Serial.print("VA: ");

if(bitRead(status0, 17) == true) {

Serial.println(resampledData.VA_Resampled[temp],HEX);

break;

Serial.print("IA: ");

}

Serial.println(resampledData.IA_Resampled[temp],HEX);

}

Serial.print("VB: ");

Serial.println(resampledData.VB_Resampled[temp],HEX);

uint16_t wfb_address = 0;

Serial.print("IB: ");

Serial.println(resampledData.IB_Resampled[temp],HEX);

// READ ADDRESS 0x4A3 WFB_TRG_STAT

Serial.print("VC: ");

uint16_t wfb_trg_stat = ade9000.SPI_Read_16(ADDR_WFB_TRG_STAT) >> 12;

Serial.println(resampledData.VC_Resampled[temp],HEX);

Serial.print("IC: ");

// IS WFB_LAST_PAGE EQUAL TO 0xBFF?

Serial.println(resampledData.IC_Resampled[temp],HEX);

if(wfb_trg_stat == 7) {

Serial.print("IN: ");

// READ 0x400 SAMPLES FROM 0x800 TO 0xBFF (PAGE 0 TO PAGE 7)

Serial.println(resampledData.IN_Resampled[temp],HEX);

wfb_address = 0x800;

}

} else if (wfb_trg_stat == 15){

// READ 0x400 SAMPLES FROM 0xC00 TO 0xFFF (PAGE 8 TO PAGE 15)

wfb_address = 0xC00;

} else {

Serial.println("wfb_trg_stat != 7 && != 15.");

Serial.print("wfb_trg_stat = ");

Serial.println(wfb_trg_stat);

}

Serial.println(wfb_address, HEX);

// curent version of SPI_Burst_Read_Resampled_Wfb reads 16 bit resampled

// data, so has to be reworked due to fixed sampling rate data stream.

// for now focusing on PAGE_FULL_IRQ timings

// ade9000.SPI_Burst_Read_Resampled_Wfb(wfb_address,128,&resampledData);

}

void resetADE9000(void)

{

digitalWrite(ADE9000_RESET_PIN, LOW);

delay(50);

digitalWrite(ADE9000_RESET_PIN, HIGH);

delay(1000);

Serial.println("Reset Done");

}

已保存差异

原始文本

打开文件

#include <Arduino.h>

// original example code
#include <SPI.h>
#include  <ADE9000RegMap.h>
#include <ADE9000API.h>

/*Basic initializations*/
ADE9000Class ade9000;
#define SPI_SPEED 5000000     //SPI Speed
#define CS_PIN 8 //8-->Arduino Zero. 16-->ESP8266 
#define ADE9000_RESET_PIN 5 //Reset Pin on HW
#define PM_1 4              //PM1 Pin: 4-->Arduino Zero. 15-->ESP8266

/*Structure decleration */
struct ActivePowerRegs powerRegs;     // Declare powerRegs of type ActivePowerRegs to store Active Power Register data
struct CurrentRMSRegs curntRMSRegs;   //Current RMS
struct VoltageRMSRegs vltgRMSRegs;    //Voltage RMS
struct VoltageTHDRegs voltageTHDRegsnValues; //Voltage THD
struct ResampledWfbData resampledData; // Resampled Data

/*Function Decleration*/
void readRegisterData(void);
void readResampledData(void);
void resetADE9000(void);

void setup() 
{
  Serial.begin(115200);
  pinMode(PM_1, OUTPUT);    //Set PM1 pin as output 
  digitalWrite(PM_1, LOW);   //Set PM1 select pin low for PSM0 mode
  pinMode(ADE9000_RESET_PIN, OUTPUT);
  digitalWrite(ADE9000_RESET_PIN, HIGH); 
  void resetADE9000(); 
  delay(1000);
  ade9000.SPI_Init(SPI_SPEED,CS_PIN); //Initialize SPI
  ade9000.SetupADE9000();             //Initialize ADE9000 registers according to values in ADE9000API.h
  //ade9000.SPI_Write_16(ADDR_RUN,0x1); //Set RUN=1 to turn on DSP. Uncomment if SetupADE9000 function is not used
  Serial.print("RUN Register: ");
  Serial.println(ade9000.SPI_Read_16(ADDR_RUN),HEX);
}

void loop() {
  readRegisterData();
  readResampledData();
  delay(10000);
}

void readRegisterData()
{
 /*Read and Print Specific Register using ADE9000 SPI Library */
  Serial.print("AIRMS: "); 
  Serial.println(ade9000.SPI_Read_32(ADDR_AIRMS),HEX); // AIRMS

/*Read and Print RMS & WATT Register using ADE9000 Read Library*/
  ade9000.ReadVoltageRMSRegs(&vltgRMSRegs);    //Template to read Power registers from ADE9000 and store data in Arduino MCU
  ade9000.ReadActivePowerRegs(&powerRegs);
  Serial.print("AVRMS:");        
  Serial.println(vltgRMSRegs.VoltageRMSReg_A); //Print AVRMS register
  Serial.print("AWATT:");        
  Serial.println(powerRegs.ActivePowerReg_A); //Print AWATT register
}

void readResampledData()
{
  uint32_t temp;
/*Read and Print Resampled data*/
  /*Start the Resampling engine to acquire 4 cycles of resampled data*/
  ade9000.SPI_Write_16(ADDR_WFB_CFG,0x1000);
  ade9000.SPI_Write_16(ADDR_WFB_CFG,0x1010);
  delay(100); //approximate time to fill the waveform buffer with 4 line cycles  
  /*Read Resampled data into Arduino Memory*/
  ade9000.SPI_Burst_Read_Resampled_Wfb(0x800,WFB_ELEMENT_ARRAY_SIZE,&resampledData);   // Burst read function
  
  for(temp=0;temp<WFB_ELEMENT_ARRAY_SIZE;temp++)
    {
      Serial.print("VA: ");
      Serial.println(resampledData.VA_Resampled[temp],HEX);
      Serial.print("IA: ");
      Serial.println(resampledData.IA_Resampled[temp],HEX);
      Serial.print("VB: ");
      Serial.println(resampledData.VB_Resampled[temp],HEX);
      Serial.print("IB: ");
      Serial.println(resampledData.IB_Resampled[temp],HEX);
      Serial.print("VC: ");
      Serial.println(resampledData.VC_Resampled[temp],HEX);
      Serial.print("IC: ");
      Serial.println(resampledData.IC_Resampled[temp],HEX);
      Serial.print("IN: ");
      Serial.println(resampledData.IN_Resampled[temp],HEX);
   }

}

void resetADE9000(void)
{
 digitalWrite(ADE9000_RESET_PIN, LOW);
 delay(50);
 digitalWrite(ADE9000_RESET_PIN, HIGH);
 delay(1000);
 Serial.println("Reset Done");
}

更改后文本

打开文件

#include <Arduino.h>

// original example code
#include <SPI.h>
#include  <ADE9000RegMap.h>
#include <ADE9000API.h>

/*Basic initializations*/
ADE9000Class ade9000;
#define SPI_SPEED 5000000     //SPI Speed
#define CS_PIN A2 // nucleo f411 boaard 
#define ADE9000_RESET_PIN 5 //Reset Pin on HW
#define PM_1 4              //PM1 Pin: 4-->Arduino Zero. 15-->ESP8266

/*Function Decleration*/
void readRegisterData(void);
void readResampledData(void);
void resetADE9000(void);

void SetupADE9000New(void) {
  ade9000.SPI_Write_16(ADDR_PGA_GAIN,0);     
  ade9000.SPI_Write_32(ADDR_CONFIG0,0); 
  ade9000.SPI_Write_16(ADDR_CONFIG1,0);
  ade9000.SPI_Write_16(ADDR_CONFIG2,0);
  ade9000.SPI_Write_16(ADDR_CONFIG3,0);
  ade9000.SPI_Write_16(ADDR_ACCMODE,0);
  ade9000.SPI_Write_16(ADDR_TEMP_CFG,0);
  ade9000.SPI_Write_16(ADDR_ZX_LP_SEL,0);
  ade9000.SPI_Write_32(ADDR_MASK0,0);
  ade9000.SPI_Write_32(ADDR_MASK1,0);
  ade9000.SPI_Write_32(ADDR_EVENT_MASK,0);
  ade9000.SPI_Write_16(ADDR_WFB_CFG,0);
  ade9000.SPI_Write_32(ADDR_VLEVEL,0);
  ade9000.SPI_Write_32(ADDR_DICOEFF,0);
  ade9000.SPI_Write_16(ADDR_EGY_TIME,0);
  ade9000.SPI_Write_16(ADDR_EP_CFG,0);
  ade9000.SPI_Write_16(ADDR_RUN,ADE9000_RUN_ON);
}

void setup() 
{
  Serial.begin(115200);
  pinMode(PM_1, OUTPUT);    //Set PM1 pin as output 
  digitalWrite(PM_1, LOW);   //Set PM1 select pin low for PSM0 mode
  pinMode(ADE9000_RESET_PIN, OUTPUT);
  digitalWrite(ADE9000_RESET_PIN, HIGH); 
  void resetADE9000(); 
  delay(1000);
  ade9000.SPI_Init(SPI_SPEED,CS_PIN); //Initialize SPI
  SetupADE9000New();
  
  /* user code start */
  // Identyfi ADE9000
  Serial.print("ADE9000 id: ");
  Serial.println(ade9000.SPI_Read_16(0x00000472), HEX);

// To set the waveform buffer, perform the following procedure:
  // 1. Write 0x03F8 to WFB_CFB (Address 0x4A0) to configure the waveform. 
  uint16_t wfb_cfg_register = 0x03F8;
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 2. Write 0'0b0 to WF_IN_EN (Bit 12) to disable waveform in
  // neutral channel to be read through the serial peripheral
  // interface (SPI).
  bitClear(wfb_cfg_register, 12);
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 3. Write 0'b11 to WF_SRC (Bits[9:8]) to enable current and
  // voltage channel waveform samples processed at 8 kSPS by
  // the DSP.
  bitSet(wfb_cfg_register, 9);
  bitSet(wfb_cfg_register, 8);
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 4. Write 0'b11 to WF_MODE (Bits[7:6]) to enable continuous
  // fill on the buffer. See the ADE9000 Technical Reference
  // Manual for more information on continuous filling mode.
  bitSet(wfb_cfg_register, 7);
  bitSet(wfb_cfg_register, 6);
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 5. Write 0'b1 to WF_CAP_SEL (Bit 5) to enable the fixed data
  // rate sampling (noncoherent).
  bitSet(wfb_cfg_register, 5);
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// 6. Write 0'b1 to WF_CAP_EN (Bit 4) to start waveform
  // capturer.
  bitSet(wfb_cfg_register, 4);
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

Serial.println(wfb_cfg_register, HEX);

// 7. Write 0'b0000 for all channels to BURST_CHAN
  // (Bits[3.0]) to select channels. See the ADE9000 data sheet
  // for other channels. 
  bitClear(wfb_cfg_register, 3);
  bitClear(wfb_cfg_register, 2);
  bitClear(wfb_cfg_register, 1);
  bitClear(wfb_cfg_register, 0);
  ade9000.SPI_Write_16(ADDR_WFB_CFG, wfb_cfg_register);

// To execute this process, take the following steps: 
  // 1. Write 0x20000 to MASK0 (Address 0x405) to enable the page full interrupt.
  ade9000.SPI_Write_32(ADDR_MASK0, 0x20000);
  // 2. Write 0x8080 to WFB_PG_IRQWN (Address 0x4A1) to set the interrupt at Page 7 and Page 15. 
  ade9000.SPI_Write_16(ADDR_WFB_PG_IRQEN, 0x8080);

Serial.print("RUN Register: ");
  Serial.println(ade9000.SPI_Read_16(ADDR_RUN),HEX);
}

void loop() {
  // readRegisterData();
  readResampledData();
  // delay(10000);
}

void readRegisterData()
{
 /*Read and Print Specific Register using ADE9000 SPI Library */
  Serial.print("AIRMS: "); 
  Serial.println(ade9000.SPI_Read_32(ADDR_AIRMS),HEX); // AIRMS

void readResampledData()
{
  // CLEAR INTERRUPTS, WRITE 0x20000 TO STATUS0
  ade9000.SPI_Write_32(ADDR_STATUS0, 0x20000);

while(digitalRead(pinNametoDigitalPin(PA_0))) {
    ;
  }
  // POLL STATUS0, BIT 17 PAGE FULL
  uint32_t status0 = 0;
  while(1) {
    status0 = ade9000.SPI_Read_32(ADDR_STATUS0);
    // IS PAGE FULL INTERRUPT (BIT 17 IN STATUS0) TRUE?
    if(bitRead(status0, 17) == true) {
      break;
    }
  }

uint16_t wfb_address = 0;

// READ ADDRESS 0x4A3 WFB_TRG_STAT
  uint16_t wfb_trg_stat = ade9000.SPI_Read_16(ADDR_WFB_TRG_STAT) >> 12;

// IS WFB_LAST_PAGE EQUAL TO 0xBFF?
  if(wfb_trg_stat == 7) {
    // READ 0x400 SAMPLES FROM 0x800 TO 0xBFF (PAGE 0 TO PAGE 7)
    wfb_address = 0x800;
  } else if (wfb_trg_stat == 15){
    // READ 0x400 SAMPLES FROM 0xC00 TO 0xFFF (PAGE 8 TO PAGE 15)
    wfb_address = 0xC00;
  } else {
    Serial.println("wfb_trg_stat != 7 && != 15.");
    Serial.print("wfb_trg_stat = ");
    Serial.println(wfb_trg_stat);
  }

Serial.println(wfb_address, HEX);

//  curent version of SPI_Burst_Read_Resampled_Wfb reads 16 bit resampled
//  data, so has to be reworked due to fixed sampling rate data stream.
//  for now focusing on PAGE_FULL_IRQ timings
//  ade9000.SPI_Burst_Read_Resampled_Wfb(wfb_address,128,&resampledData);

}

void resetADE9000(void)
{
 digitalWrite(ADE9000_RESET_PIN, LOW);
 delay(50);
 digitalWrite(ADE9000_RESET_PIN, HIGH);
 delay(1000);
 Serial.println("Reset Done");
}