Comparar texto

Encuentra la diferencia entre dos archivos de texto

Editor live

Ocultar espacios en blanco

Ocultar sin cambios

Sin ajuste de línea

Vista

Nivel de detalle

Estilos de texto

Resaltado de sintaxis

Diffchecker Desktop La forma más segura de usar Diffchecker. ¡Obtén la app de Diffchecker Desktop: tus diffs nunca salen de tu computadora!Obtener Desktop

Untitled diff

Creado hace 9 añosEl diff nunca expira

3 eliminaciones

Líneas
Total
Eliminado

Caracteres
Total
Eliminado

Para continuar usando esta función, actualice a Diffchecker Pro Ver precios

51 líneas

3 adiciones

Líneas
Total
Añadido

Caracteres
Total
Añadido

Para continuar usando esta función, actualice a Diffchecker Pro Ver precios

51 líneas

Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)

Licensed under GNU GPL v2

For bug reports, read

http://openocd.org/doc/doxygen/bugs.html

Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD

adapter speed: 2000 kHz

adapter_nsrst_delay: 100

srst_only separate srst_nogate srst_open_drain connect_assert_srst

Warn : Interface already configured, ignoring

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

Info : clock speed 1800 kHz

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B

Info : using stlink api v2

Info : Target voltage: 0.114210

Info : Target voltage: 0.117383

Error: target voltage may be too low for reliable debugging

Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints

Info : accepting 'gdb' connection on tcp/3334

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

configuring PLL

Info : device id = 0x10006421

Info : flash size = 512kbytes

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

configuring PLL

Info : Padding image section 0 with 12 bytes

STM32F446.cpu: target state: halted

target halted due to breakpoint, current mode: Thread

xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x1fff503a msp: 0x20002af8

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

Diferencias guardadas

Texto original

Abrir archivo

Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Warn : Interface already configured, ignoring
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : clock speed 1800 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 0.114210
Error: target voltage may be too low for reliable debugging
Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection on tcp/3334
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : device id = 0x10006421
Info : flash size = 512kbytes
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : Padding image section 0 with 12 bytes
STM32F446.cpu: target state: halted
target halted due to breakpoint, current mode: Thread 
xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x1fff503a msp: 0x20002af8

Texto modificado

Abrir archivo

Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Warn : Interface already configured, ignoring
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : clock speed 1800 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 0.117383
Error: target voltage may be too low for reliable debugging
Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection on tcp/3334
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : device id = 0x10006421
Info : flash size = 512kbytes
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : Padding image section 0 with 12 bytes
STM32F446.cpu: target state: halted
target halted due to breakpoint, current mode: Thread 
xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000