比較文本

尋找兩個文字檔案之間的差異

即時編輯器
隱藏空白變更
摺疊未變更行
關閉換行
檢視
比對精度
文字樣式
語法突出顯示

Untitled diff

建立於 差異永不過期
3 刪除
51 行
3 新增
51 行
Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)
Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)
Licensed under GNU GPL v2
Licensed under GNU GPL v2
For bug reports, read
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 2000 kHz
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_assert_srst
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Warn : Interface already configured, ignoring
Warn : Interface already configured, ignoring
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : clock speed 1800 kHz
Info : clock speed 1800 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B
Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : using stlink api v2
Info : Target voltage: 0.114210
Info : Target voltage: 0.117383
Error: target voltage may be too low for reliable debugging
Error: target voltage may be too low for reliable debugging
Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection on tcp/3334
Info : accepting 'gdb' connection on tcp/3334
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
configuring PLL
Info : device id = 0x10006421
Info : device id = 0x10006421
Info : flash size = 512kbytes
Info : flash size = 512kbytes
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
configuring PLL
Info : Padding image section 0 with 12 bytes
Info : Padding image section 0 with 12 bytes
STM32F446.cpu: target state: halted
STM32F446.cpu: target state: halted
target halted due to breakpoint, current mode: Thread
target halted due to breakpoint, current mode: Thread
xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000
xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x1fff503a msp: 0x20002af8
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
已保存差異