Confronta il testo

Trova la differenza tra due file di testo

Editor live

Nascondi spazi bianchi

Comprimi invariate

Senza a capo

Layout

Livello di dettaglio

Stili testo

Evidenziazione sintassi

Diffchecker Desktop Il modo più sicuro per usare Diffchecker. Ottieni l'app Diffchecker Desktop: i tuoi diff non lasciano mai il tuo computer!Ottieni Desktop

Untitled diff

Creato 9 anni faIl diff non scade mai

3 rimozioni

Linee
Totale
Rimosso

Caratteri
Totale
Rimosso

Per continuare a utilizzare questa funzione, aggiorna a Diffchecker Pro Visualizza prezzi

51 linee

3 aggiunte

Linee
Totale
Aggiunto

Caratteri
Totale
Aggiunto

Per continuare a utilizzare questa funzione, aggiorna a Diffchecker Pro Visualizza prezzi

51 linee

Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)

Licensed under GNU GPL v2

For bug reports, read

http://openocd.org/doc/doxygen/bugs.html

Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD

adapter speed: 2000 kHz

adapter_nsrst_delay: 100

srst_only separate srst_nogate srst_open_drain connect_assert_srst

Warn : Interface already configured, ignoring

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

Info : clock speed 1800 kHz

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B

Info : using stlink api v2

Info : Target voltage: 0.114210

Info : Target voltage: 0.117383

Error: target voltage may be too low for reliable debugging

Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints

Info : accepting 'gdb' connection on tcp/3334

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

configuring PLL

Info : device id = 0x10006421

Info : flash size = 512kbytes

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

configuring PLL

Info : Padding image section 0 with 12 bytes

STM32F446.cpu: target state: halted

target halted due to breakpoint, current mode: Thread

xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000

Info : Unable to match requested speed 2000 kHz, using 1800 kHz

adapter speed: 1800 kHz

STM32F446.cpu: target state: halted

target halted due to debug-request, current mode: Thread

xPSR: 0x01000000 pc: 0x1fff503a msp: 0x20002af8

xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000

Diff salvati

Testo originale

Apri file

Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Warn : Interface already configured, ignoring
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : clock speed 1800 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 0.114210
Error: target voltage may be too low for reliable debugging
Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection on tcp/3334
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : device id = 0x10006421
Info : flash size = 512kbytes
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : Padding image section 0 with 12 bytes
STM32F446.cpu: target state: halted
target halted due to breakpoint, current mode: Thread 
xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x1fff503a msp: 0x20002af8

Testo modificato

Apri file

Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Warn : Interface already configured, ignoring
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : clock speed 1800 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v27 API v2 M v15 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 0.117383
Error: target voltage may be too low for reliable debugging
Info : STM32F446.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection on tcp/3334
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : device id = 0x10006421
Info : flash size = 512kbytes
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000
configuring PLL
Info : Padding image section 0 with 12 bytes
STM32F446.cpu: target state: halted
target halted due to breakpoint, current mode: Thread 
xPSR: 0x61000000 pc: 0x20000046 msp: 0x20020000
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
adapter speed: 1800 kHz
STM32F446.cpu: target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000e88 msp: 0x20020000