Compare text

Find the difference between two text files

Real-time editor

Hide unchanged lines

Disable line wrap

Layout

Diff precision

Syntax highlighting

Diffchecker Desktop The most secure way to run Diffchecker. Get the Diffchecker Desktop app: your diffs never leave your computer!Get Desktop

smartmon.sh

Created 5 years agoDiff never expires

3 removals

Lines
Total
Removed

Characters
Total
Removed

To continue using this feature, upgrade to Diffchecker Pro View Pricing

242 lines

76 additions

Lines
Total
Added

Characters
Total
Added

To continue using this feature, upgrade to Diffchecker Pro View Pricing

306 lines

#!/usr/bin/env bash

# Script informed by the collectd monitoring script for smartmontools (using smartctl)

# source at: http://devel.dob.sk/collectd-scripts/

# TODO: This probably needs to be a little more complex. The raw numbers can have more

# data in them than you'd think.

# http://arstechnica.com/civis/viewtopic.php?p=22062211

# Formatting done via shfmt -i 2

# https://github.com/mvdan/sh

SMARTCTL=`which smartctl`

#FORCED_DEVICE_LIST=$(cat << EOF

#/dev/sg3|scsi

#/dev/sg4|sat

#/dev/sg5|sat

#/dev/sg6|sat

#/dev/sg7|scsi

#/dev/sg8|sat

#/dev/sg9|sat

#/dev/sdc|sat

#EOF

parse_smartctl_attributes_awk="$(

cat <<'SMARTCTLAWK'

$1 ~ /^ *[0-9]+$/ && $2 ~ /^[a-zA-Z0-9_-]+$/ {

gsub(/-/, "_");

printf "%s_value{%s,smart_id=\"%s\"} %d\n", tolower($2), labels, $1, $4

printf "%s_worst{%s,smart_id=\"%s\"} %d\n", tolower($2), labels, $1, $5

printf "%s_threshold{%s,smart_id=\"%s\"} %d\n", tolower($2), labels, $1, $6

printf "%s_raw_value{%s,smart_id=\"%s\"} %e\n", tolower($2), labels, $1, $10

}

SMARTCTLAWK

smartmon_attrs="$(

cat <<'SMARTMONATTRS'

airflow_temperature_cel

command_timeout

current_pending_sector

end_to_end_error

erase_fail_count

g_sense_error_rate

hardware_ecc_recovered

host_reads_mib

host_reads_32mib

host_writes_mib

host_writes_32mib

load_cycle_count

media_wearout_indicator

multi_zone_error_rate

wear_leveling_count

nand_writes_1gib

offline_uncorrectable

percent_lifetime_remain

power_cycle_count

power_off_retract_count

power_on_hours

program_fail_count

raw_read_error_rate

reallocated_event_count

reallocated_sector_ct

reallocate_nand_blk_cnt

reported_uncorrect

sata_downshift_count

seek_error_rate

spin_retry_count

spin_up_time

start_stop_count

temperature_case

temperature_celsius

temperature_internal

total_lbas_read

total_lbas_written

total_host_sector_write

udma_crc_error_count

unsafe_shutdown_count

workld_host_reads_perc

workld_media_wear_indic

workload_minutes

throughput_performance

seek_time_performance

helium_level

unknown_attribute

SMARTMONATTRS

smartmon_attrs="$(echo ${smartmon_attrs} | xargs | tr ' ' '|')"

parse_smartctl_attributes() {

local disk="$1"

local disk_type="$2"

local name="$3"

local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\""

local serial_number="$4"

local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\""

local vars="$(echo "${smartmon_attrs}" | xargs | tr ' ' '|')"

sed 's/^ \+//g' |

awk -v labels="${labels}" "${parse_smartctl_attributes_awk}" 2>/dev/null |

grep -E "(${smartmon_attrs})"

}

parse_smartctl_scsi_attributes() {

local disk="$1"

local disk_type="$2"

local name="$3"

local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\""

while read line; do

attr_type="$(echo "${line}" | tr '=' ':' | cut -f1 -d: | sed 's/^ \+//g' | tr ' ' '_')"

attr_value="$(echo "${line}" | tr '=' ':' | cut -f2 -d: | sed 's/^ \+//g')"

case "${attr_type}" in

number_of_hours_powered_up_) power_on="$(echo "${attr_value}" | awk '{ printf "%e\n", $1 }')" ;;

Current_Drive_Temperature) temp_cel="$(echo ${attr_value} | cut -f1 -d' ' | awk '{ printf "%e\n", $1 }')" ;;

Blocks_read_from_cache_and_sent_to_initiator_) lbas_read="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;

Accumulated_start-stop_cycles) power_cycle="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;

Elements_in_grown_defect_list) grown_defects="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;

Non-medium_error_count) non_medium="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;

read) read_uncorrected="$(echo ${attr_value} | awk '{ printf "%e\n", $7 }')" ;;

write) write_uncorrected="$(echo ${attr_value} | awk '{ printf "%e\n", $7 }')" ;;

verify) verify_uncorrected="$(echo ${attr_value} | awk '{ printf "%e\n", $7 }')" ;;

esac

done

[ ! -z "$power_on" ] && echo "power_on_hours_raw_value{${labels},smart_id=\"9\"} ${power_on}"

[ ! -z "$temp_cel" ] && echo "temperature_celsius_raw_value{${labels},smart_id=\"194\"} ${temp_cel}"

[ ! -z "$lbas_read" ] && echo "total_lbas_read_raw_value{${labels},smart_id=\"242\"} ${lbas_read}"

[ ! -z "$power_cycle" ] && echo "power_cycle_count_raw_value{${labels},smart_id=\"12\"} ${power_cycle}"

[ ! -z "$grown_defects" ] && echo "sas_grown_defects_count_raw_value{${labels},smart_id=\"0\"} ${grown_defects}"

[ ! -z "$non_medium" ] && echo "sas_non_medium_errors_count_raw_value{${labels},smart_id=\"0\"} ${non_medium}"

[ ! -z "$read_uncorrected" ] && echo "sas_read_uncorrected_errors_count_raw_value{${labels},smart_id=\"0\"} ${read_uncorrected}"

[ ! -z "$write_uncorrected" ] && echo "sas_write_uncorrected_errors_count_raw_value{${labels},smart_id=\"0\"} ${write_uncorrected}"

[ ! -z "$verify_uncorrected" ] && echo "sas_verify_uncorrected_errors_count_raw_value{${labels},smart_id=\"0\"} ${verify_uncorrected}"

}

parse_smartctl_nvme_attributes() {

local disk="$1"

local disk_type="$2"

local name="$3"

local serial_number="$4"

local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\""

while read line; do

attr_type="$(echo "${line}" | tr '=' ':' | cut -f1 -d: | sed 's/^ \+//g' | tr ' ' '_')"

attr_value="$(echo "${line}" | tr '=' ':' | cut -f2 -d: | sed 's/^ \+//g')"

case "${attr_type}" in

Temperature) temp_cel="$(echo ${attr_value} | cut -f1 -d' ' | awk '{ printf "%e\n", $1 }')" ;;

Percentage_Used) wear_level="$(echo "${attr_value}" | awk '{ printf "%e\n", $1 }')" ;;

Host_Read_Commands) host_read_commands="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;

Host_Write_Commands) host_write_commands="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;

Data_Units_Read) data_read="$(echo ${attr_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%e\n", $1}')" ;;

Data_Units_Written) data_written="$(echo ${attr_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%e\n", $1}')" ;;

Power_Cycles) power_cycles="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;

Power_On_Hours) power_on="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;

Unsafe_Shutdowns) unsafe_shutdown_count="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;

esac

done

[ ! -z "$temp_cel" ] && echo "temperature_celsius_raw_value{${labels},smart_id=\"194\"} ${temp_cel}"

[ ! -z "$wear_level" ] && echo "wear_level_raw_value{${labels},smart_id=\"0\"} ${wear_level}"

[ ! -z "$host_read_commands" ] && echo "host_read_commands_raw_value{${labels},smart_id=\"0\"} ${host_read_commands}"

[ ! -z "$host_write_commands" ] && echo "host_write_commands_raw_value{${labels},smart_id=\"0\"} ${host_write_commands}"

[ ! -z "$data_read" ] && echo "data_units_read_raw_value{${labels},smart_id=\"0\"} ${data_read}"

[ ! -z "$data_written" ] && echo "data_units_written_raw_value{${labels},smart_id=\"0\"} ${data_written}"

[ ! -z "$power_cycles" ] && echo "power_cycle_count_raw_value{${labels},smart_id=\"12\"} ${power_cycles}"

[ ! -z "$power_on" ] && echo "power_on_hours_raw_value{${labels},smart_id=\"9\"} ${power_on}"

[ ! -z "$unsafe_shutdown_count" ] && echo "unsafe_shutdowns_raw_value{${labels},smart_id=\"9\"} ${unsafe_shutdown_count}"

}

parse_smartctl_info() {

local -i smart_available=0 smart_enabled=0 smart_healthy=0

local disk="$1" disk_type="$2" name="$3"

local model_family='N/A' device_model='N/A' size='N/A' serial_number='N/A' fw_version='N/A' vendor='N/A' product='N/A' revision='N/A' lun_id='N/A'

while read line; do

info_type="$(echo "${line}" | cut -f1 -d: | tr ' ' '_')"

info_value="$(echo "${line}" | cut -f2- -d: | sed 's/^ \+//g' | sed 's/"/\\"/')"

case "${info_type}" in

Model_Family) model_family="${info_value}" ;;

Device_Model) device_model="${info_value}" ;;

Model_Number) device_model="${info_value}" ;;

Serial_[Nn]umber) serial_number="${info_value}" ;;

Firmware_Version) fw_version="${info_value}" ;;

User_Capacity) size="$(echo ${info_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%d GB\n", $1/1024/1024/1024}')" ;;

Namespace_1_Size/Capacity) size="$(echo ${info_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%d GB\n", $1/1024/1024/1024}')" ;;

Vendor) vendor="${info_value}" ;;

Product) product="${info_value}" ;;

Revision) revision="${info_value}" ;;

Logical_Unit_id) lun_id="${info_value}" ;;

esac

if [[ "${info_type}" == 'SMART_support_is' ]]; then

case "${info_value:0:7}" in

val=$(echo $info_value | awk '{$1=$1k;print}')

case "${val:0:7}" in

Enabled) smart_enabled=1 ;;

Availab) smart_available=1 ;;

Unavail) smart_available=0 ;;

esac

if [[ "${info_type}" == 'SMART_overall-health_self-assessment_test_result' ]]; then

info_value=`echo ${info_value}| tr -d ' '`

case "${info_value}" in

PASSED) smart_healthy=1 ;;

esac

elif [[ "${info_type}" == 'SMART_Health_Status' ]]; then

info_value=`echo ${info_value}| tr -d ' '`

case "${info_value}" in

OK) smart_healthy=1 ;;

esac

done

if [[ $device_model == 'N/A' ]] && ([[ $vendor != 'N/A' ]] || [[ $product != 'N/A' ]])

then

device_model="${vendor} $product"

disk=$(echo $disk | awk '{$1=$1k;print}')

name=$(echo $name | awk '{$1=$1k;print}')

vendor=$(echo $vendor | awk '{$1=$1k;print}')

model_family=$(echo $model_family | awk '{$1=$1k;print}')

device_model=$(echo $device_model | awk '{$1=$1k;print}')

serial_number=$(echo $serial_number | awk '{$1=$1k;print}')

fw_version=$(echo $fw_version | awk '{$1=$1k;print}')

echo "device_smart_available{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\"} ${smart_available}"

echo "device_smart_available{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\"} ${smart_available}"

echo "device_smart_enabled{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\"} ${smart_enabled}"

echo "device_smart_enabled{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\"} ${smart_enabled}"

echo "device_smart_healthy{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\"} ${smart_healthy}"

echo "device_smart_healthy{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\"} ${smart_healthy}"

}

output_format_awk="$(

cat <<'OUTPUTAWK'

BEGIN { v = "" }

v != $1 {

print "# HELP smartmon_" $1 " SMART metric " $1;

print "# TYPE smartmon_" $1 " gauge";

v = $1

}

{print "smartmon_" $0}

OUTPUTAWK

format_output() {

sort |

awk -F'{' "${output_format_awk}"

}

smartctl_version="$($SMARTCTL -V | head -n1 | awk '$1 == "smartctl" {print $2}')"

echo "smartctl_version{version=\"${smartctl_version}\"} 1" | format_output

if [[ "$(expr "${smartctl_version}" : '$[0-9]*$\..*')" -lt 6 ]]; then

exit

device_list=

if [[ -z $FORCED_DEVICE_LIST ]]

then

device_list="$($SMARTCTL --scan-open | awk '/^\/dev/{print $1 "|" $3}')"

else

device_list=$FORCED_DEVICE_LIST

for device in ${device_list}; do

disk="$(echo ${device} | cut -f1 -d'|')"

type="$(echo ${device} | cut -f2 -d'|')"

disk=$(echo $disk | awk '{$1=$1k;print}')

type=$(echo $type | awk '{$1=$1k;print}')

serial_number=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/[Ss]erial [Nn]umber/ {print $2}'| sed -E 's/^\s+//g'`

serial_number=$(echo $serial_number | awk '{$1=$1k;print}')

active=1

# Check if the device is in a low-power mode

$SMARTCTL -n standby -d "${type}" "${disk}" > /dev/null || active=0

echo "device_active{disk=\"${disk}\",type=\"${type}\"}" "${active}"

echo "device_active{disk=\"${disk}\",type=\"${type}\",serial_number=\"${serial_number}\"}" "${active}"

# Skip further metrics to prevent the disk from spinning up

test ${active} -eq 0 && continue

# Get Device name label

name=""

case ${type} in

scsi)

vendor=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Vendor/ {print $2}'| sed -E 's/^\s+//g'`

product=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Product/ {print $2}'| sed -E 's/^\s+//g'`

name="${vendor} ${product}" ;;

nvme)

name=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Model Number/ {print $2}'| sed -E 's/^\s+//g'` ;;

name=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Device Model/ {print $2}'| sed -E 's/^\s+//g'` ;;

esac

echo "smartctl_run{disk=\"${disk}\",type=\"${type}\",name=\"${name}\"}" "$(TZ=UTC date '+%s')"

name=$(echo $name | awk '{$1=$1k;print}')

echo "smartctl_run{disk=\"${disk}\",type=\"${type}\",name=\"${name}\",serial_number=\"${serial_number}\"}" "$(TZ=UTC date '+%s')"

# Get the SMART information and health

$SMARTCTL -i -H -d "${type}" "${disk}" | parse_smartctl_info "${disk}" "${type}" "${name}"

# Get the SMART attributes

case ${type} in

sat) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" ;;

sat) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;

atacam) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" ;;

nvme) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_nvme_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;

sat+megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" ;;

atacam) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;

sat+megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;

scsi) $SMARTCTL -a -d "${type}" "${disk}" | parse_smartctl_scsi_attributes "${disk}" "${type}" "${name}" ;;

megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_scsi_attributes "${disk}" "${type}" "${name}" ;;

continue

;;

esac

done | format_output

Saved diffs

Original text

Open file

#!/usr/bin/env bash
# Script informed by the collectd monitoring script for smartmontools (using smartctl)
# by Samuel B. <samuel_._behan_(at)_dob_._sk> (c) 2012
# source at: http://devel.dob.sk/collectd-scripts/

# TODO: This probably needs to be a little more complex.  The raw numbers can have more
#       data in them than you'd think.
#       http://arstechnica.com/civis/viewtopic.php?p=22062211

# Formatting done via shfmt -i 2
# https://github.com/mvdan/sh

parse_smartctl_attributes_awk="$(
  cat <<'SMARTCTLAWK'
$1 ~ /^ *[0-9]+$/ && $2 ~ /^[a-zA-Z0-9_-]+$/ {
  gsub(/-/, "_");
  printf "%s_value{%s,smart_id=\"%s\"} %d\n", tolower($2), labels, $1, $4
  printf "%s_worst{%s,smart_id=\"%s\"} %d\n", tolower($2), labels, $1, $5
  printf "%s_threshold{%s,smart_id=\"%s\"} %d\n", tolower($2), labels, $1, $6
  printf "%s_raw_value{%s,smart_id=\"%s\"} %e\n", tolower($2), labels, $1, $10
}
SMARTCTLAWK
)"

smartmon_attrs="$(
  cat <<'SMARTMONATTRS'
airflow_temperature_cel
command_timeout
current_pending_sector
end_to_end_error
erase_fail_count
g_sense_error_rate
hardware_ecc_recovered
host_reads_mib
host_reads_32mib
host_writes_mib
host_writes_32mib
load_cycle_count
media_wearout_indicator
multi_zone_error_rate
wear_leveling_count
nand_writes_1gib
offline_uncorrectable
percent_lifetime_remain
power_cycle_count
power_off_retract_count
power_on_hours
program_fail_count
raw_read_error_rate
reallocated_event_count
reallocated_sector_ct
reallocate_nand_blk_cnt
reported_uncorrect
sata_downshift_count
seek_error_rate
spin_retry_count
spin_up_time
start_stop_count
temperature_case
temperature_celsius
temperature_internal
total_lbas_read
total_lbas_written
total_host_sector_write
udma_crc_error_count
unsafe_shutdown_count
workld_host_reads_perc
workld_media_wear_indic
workload_minutes
SMARTMONATTRS
)"
smartmon_attrs="$(echo ${smartmon_attrs} | xargs | tr ' ' '|')"

parse_smartctl_attributes() {
  local disk="$1"
  local disk_type="$2"
  local name="$3"
  local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\""
  local vars="$(echo "${smartmon_attrs}" | xargs | tr ' ' '|')"
  sed 's/^ \+//g' |
    awk -v labels="${labels}" "${parse_smartctl_attributes_awk}" 2>/dev/null |
    grep -E "(${smartmon_attrs})"
}

parse_smartctl_scsi_attributes() {
  local disk="$1"
  local disk_type="$2"
  local name="$3"
  local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\""
  while read line; do
    attr_type="$(echo "${line}" | tr '=' ':' | cut -f1 -d: | sed 's/^ \+//g' | tr ' ' '_')"
    attr_value="$(echo "${line}" | tr '=' ':' | cut -f2 -d: | sed 's/^ \+//g')"
    case "${attr_type}" in
    number_of_hours_powered_up_) power_on="$(echo "${attr_value}" | awk '{ printf "%e\n", $1 }')" ;;
    Current_Drive_Temperature) temp_cel="$(echo ${attr_value} | cut -f1 -d' ' | awk '{ printf "%e\n", $1 }')" ;;
    Blocks_read_from_cache_and_sent_to_initiator_) lbas_read="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;
    Accumulated_start-stop_cycles) power_cycle="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;
    Elements_in_grown_defect_list) grown_defects="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;
    Non-medium_error_count) non_medium="$(echo ${attr_value} | awk '{ printf "%e\n", $1 }')" ;;
    read) read_uncorrected="$(echo ${attr_value} | awk '{ printf "%e\n", $7 }')" ;;
    write) write_uncorrected="$(echo ${attr_value} | awk '{ printf "%e\n", $7 }')" ;;
    verify) verify_uncorrected="$(echo ${attr_value} | awk '{ printf "%e\n", $7 }')" ;;
    esac
  done
  [ ! -z "$power_on" ] && echo "power_on_hours_raw_value{${labels},smart_id=\"9\"} ${power_on}"
  [ ! -z "$temp_cel" ] && echo "temperature_celsius_raw_value{${labels},smart_id=\"194\"} ${temp_cel}"
  [ ! -z "$lbas_read" ] && echo "total_lbas_read_raw_value{${labels},smart_id=\"242\"} ${lbas_read}"
  [ ! -z "$power_cycle" ] && echo "power_cycle_count_raw_value{${labels},smart_id=\"12\"} ${power_cycle}"
  [ ! -z "$grown_defects" ] && echo "sas_grown_defects_count_raw_value{${labels},smart_id=\"0\"} ${grown_defects}"
  [ ! -z "$non_medium" ] && echo "sas_non_medium_errors_count_raw_value{${labels},smart_id=\"0\"} ${non_medium}"
  [ ! -z "$read_uncorrected" ] && echo "sas_read_uncorrected_errors_count_raw_value{${labels},smart_id=\"0\"} ${read_uncorrected}"
  [ ! -z "$write_uncorrected" ] && echo "sas_write_uncorrected_errors_count_raw_value{${labels},smart_id=\"0\"} ${write_uncorrected}"
  [ ! -z "$verify_uncorrected" ] && echo "sas_verify_uncorrected_errors_count_raw_value{${labels},smart_id=\"0\"} ${verify_uncorrected}"
}

parse_smartctl_info() {
  local -i smart_available=0 smart_enabled=0 smart_healthy=0
  local disk="$1" disk_type="$2" name="$3"
  local model_family='N/A' device_model='N/A' size='N/A' serial_number='N/A' fw_version='N/A' vendor='N/A' product='N/A' revision='N/A' lun_id='N/A'
  while read line; do
    info_type="$(echo "${line}" | cut -f1 -d: | tr ' ' '_')"
    info_value="$(echo "${line}" | cut -f2- -d: | sed 's/^ \+//g' | sed 's/"/\\"/')"
    case "${info_type}" in
    Model_Family) model_family="${info_value}" ;;
    Device_Model) device_model="${info_value}" ;;
    Serial_[Nn]umber) serial_number="${info_value}" ;;
    Firmware_Version) fw_version="${info_value}" ;;
    User_Capacity) size="$(echo ${info_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%d GB\n", $1/1024/1024/1024}')" ;;
    Vendor) vendor="${info_value}" ;;
    Product) product="${info_value}" ;;
    Revision) revision="${info_value}" ;;
    Logical_Unit_id) lun_id="${info_value}" ;;
    esac
    if [[ "${info_type}" == 'SMART_support_is' ]]; then
      case "${info_value:0:7}" in
      Enabled) smart_enabled=1 ;;
      Availab) smart_available=1 ;;
      Unavail) smart_available=0 ;;
      esac
    fi
    if [[ "${info_type}" == 'SMART_overall-health_self-assessment_test_result' ]]; then
      info_value=`echo ${info_value}| tr -d ' '`
      case "${info_value}" in
      PASSED) smart_healthy=1 ;;
      esac
    elif [[ "${info_type}" == 'SMART_Health_Status' ]]; then
      info_value=`echo ${info_value}| tr -d ' '`
      case "${info_value}" in
      OK) smart_healthy=1 ;;
      esac
    fi
  done
  if [[ $device_model == 'N/A' ]] && ([[ $vendor != 'N/A' ]] || [[ $product != 'N/A'  ]])
    then
    device_model="${vendor} $product"
  fi
  echo "device_info{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",vendor=\"${vendor}\",product=\"${product}\",revision=\"${revision}\",lun_id=\"${lun_id}\",model_family=\"${model_family}\",device_model=\"${device_model}\",serial_number=\"${serial_number}\",size=\"${size}\",firmware_version=\"${fw_version}\",smart_healthy=\"${smart_healthy}\"} 1"
  echo "device_smart_available{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\"} ${smart_available}"
  echo "device_smart_enabled{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\"} ${smart_enabled}"
  echo "device_smart_healthy{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\"} ${smart_healthy}"
}

output_format_awk="$(
  cat <<'OUTPUTAWK'
BEGIN { v = "" }
v != $1 {
  print "# HELP smartmon_" $1 " SMART metric " $1;
  print "# TYPE smartmon_" $1 " gauge";
  v = $1
}
{print "smartmon_" $0}
OUTPUTAWK
)"

format_output() {
  sort |
    awk -F'{' "${output_format_awk}"
}

smartctl_version="$($SMARTCTL -V | head -n1 | awk '$1 == "smartctl" {print $2}')"

echo "smartctl_version{version=\"${smartctl_version}\"} 1" | format_output

if [[ "$(expr "${smartctl_version}" : '$[0-9]*$\..*')" -lt 6 ]]; then
  exit
fi

device_list=
if [[ -z $FORCED_DEVICE_LIST ]]
  then
  device_list="$($SMARTCTL --scan-open | awk '/^\/dev/{print $1 "|" $3}')"
else
  device_list=$FORCED_DEVICE_LIST
fi

for device in ${device_list}; do
  disk="$(echo ${device} | cut -f1 -d'|')"
  type="$(echo ${device} | cut -f2 -d'|')"
  active=1
  # Check if the device is in a low-power mode
  $SMARTCTL -n standby -d "${type}" "${disk}" > /dev/null || active=0
  echo "device_active{disk=\"${disk}\",type=\"${type}\"}" "${active}"
  # Skip further metrics to prevent the disk from spinning up
  test ${active} -eq 0 && continue
  # Get Device name label
  name=""
  case ${type} in
    scsi)
      vendor=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Vendor/ {print $2}'| sed -E 's/^\s+//g'`
      product=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Product/ {print $2}'| sed -E 's/^\s+//g'`
      name="${vendor} ${product}" ;;
    *)
      name=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Device Model/ {print $2}'| sed -E 's/^\s+//g'` ;;
  esac
  echo "smartctl_run{disk=\"${disk}\",type=\"${type}\",name=\"${name}\"}" "$(TZ=UTC date '+%s')"
  # Get the SMART information and health
  $SMARTCTL -i -H -d "${type}" "${disk}" | parse_smartctl_info "${disk}" "${type}" "${name}"
  # Get the SMART attributes
  case ${type} in
    sat) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" ;;
    atacam) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" ;;
    sat+megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" ;;
    scsi) $SMARTCTL -a -d "${type}" "${disk}" | parse_smartctl_scsi_attributes "${disk}" "${type}" "${name}" ;;
    megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_scsi_attributes "${disk}" "${type}" "${name}" ;;
    *)
      continue
      ;;
  esac
done | format_output

Changed text

Open file

# TODO: This probably needs to be a little more complex.  The raw numbers can have more
#       data in them than you'd think.
#       http://arstechnica.com/civis/viewtopic.php?p=22062211

# Formatting done via shfmt -i 2
# https://github.com/mvdan/sh

smartmon_attrs="$(
  cat <<'SMARTMONATTRS'
airflow_temperature_cel
command_timeout
current_pending_sector
end_to_end_error
erase_fail_count
g_sense_error_rate
hardware_ecc_recovered
host_reads_mib
host_reads_32mib
host_writes_mib
host_writes_32mib
load_cycle_count
media_wearout_indicator
multi_zone_error_rate
wear_leveling_count
nand_writes_1gib
offline_uncorrectable
percent_lifetime_remain
power_cycle_count
power_off_retract_count
power_on_hours
program_fail_count
raw_read_error_rate
reallocated_event_count
reallocated_sector_ct
reallocate_nand_blk_cnt
reported_uncorrect
sata_downshift_count
seek_error_rate
spin_retry_count
spin_up_time
start_stop_count
temperature_case
temperature_celsius
temperature_internal
total_lbas_read
total_lbas_written
total_host_sector_write
udma_crc_error_count
unsafe_shutdown_count
workld_host_reads_perc
workld_media_wear_indic
workload_minutes
throughput_performance
seek_time_performance
helium_level
unknown_attribute
SMARTMONATTRS
)"
smartmon_attrs="$(echo ${smartmon_attrs} | xargs | tr ' ' '|')"

parse_smartctl_attributes() {
  local disk="$1"
  local disk_type="$2"
  local name="$3"
  local serial_number="$4"
  local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\""
  local vars="$(echo "${smartmon_attrs}" | xargs | tr ' ' '|')"
  sed 's/^ \+//g' |
    awk -v labels="${labels}" "${parse_smartctl_attributes_awk}" 2>/dev/null |
    grep -E "(${smartmon_attrs})"
}

parse_smartctl_nvme_attributes() {
  local disk="$1"
  local disk_type="$2"
  local name="$3"
  local serial_number="$4"
  local labels="disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\""

while read line; do
    attr_type="$(echo "${line}" | tr '=' ':' | cut -f1 -d: | sed 's/^ \+//g' | tr ' ' '_')"
    attr_value="$(echo "${line}" | tr '=' ':' | cut -f2 -d: | sed 's/^ \+//g')"
    case "${attr_type}" in
    Temperature) temp_cel="$(echo ${attr_value} | cut -f1 -d' ' | awk '{ printf "%e\n", $1 }')" ;;
    Percentage_Used) wear_level="$(echo "${attr_value}" | awk '{ printf "%e\n", $1 }')" ;;
    Host_Read_Commands) host_read_commands="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;
    Host_Write_Commands) host_write_commands="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;
    Data_Units_Read) data_read="$(echo ${attr_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%e\n", $1}')" ;;
    Data_Units_Written) data_written="$(echo ${attr_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%e\n", $1}')" ;;
    Power_Cycles) power_cycles="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;
    Power_On_Hours) power_on="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;
    Unsafe_Shutdowns) unsafe_shutdown_count="$(echo ${attr_value} | awk '/[0-9]/{gsub ( /,/,"" ) } ; 1' | awk '{ printf "%e\n", $1 }')" ;;
    esac
  done
  [ ! -z "$temp_cel" ] && echo "temperature_celsius_raw_value{${labels},smart_id=\"194\"} ${temp_cel}"
  [ ! -z "$wear_level" ] && echo "wear_level_raw_value{${labels},smart_id=\"0\"} ${wear_level}"
  [ ! -z "$host_read_commands" ] && echo "host_read_commands_raw_value{${labels},smart_id=\"0\"} ${host_read_commands}"
  [ ! -z "$host_write_commands" ] && echo "host_write_commands_raw_value{${labels},smart_id=\"0\"} ${host_write_commands}"
  [ ! -z "$data_read" ] && echo "data_units_read_raw_value{${labels},smart_id=\"0\"} ${data_read}"
  [ ! -z "$data_written" ] && echo "data_units_written_raw_value{${labels},smart_id=\"0\"} ${data_written}"
  [ ! -z "$power_cycles" ] && echo "power_cycle_count_raw_value{${labels},smart_id=\"12\"} ${power_cycles}"
  [ ! -z "$power_on" ] && echo "power_on_hours_raw_value{${labels},smart_id=\"9\"} ${power_on}"
  [ ! -z "$unsafe_shutdown_count" ] && echo "unsafe_shutdowns_raw_value{${labels},smart_id=\"9\"} ${unsafe_shutdown_count}"
}

parse_smartctl_info() {
  local -i smart_available=0 smart_enabled=0 smart_healthy=0
  local disk="$1" disk_type="$2" name="$3"
  local model_family='N/A' device_model='N/A' size='N/A' serial_number='N/A' fw_version='N/A' vendor='N/A' product='N/A' revision='N/A' lun_id='N/A'
  while read line; do
    info_type="$(echo "${line}" | cut -f1 -d: | tr ' ' '_')"
    info_value="$(echo "${line}" | cut -f2- -d: | sed 's/^ \+//g' | sed 's/"/\\"/')"
    case "${info_type}" in
    Model_Family) model_family="${info_value}" ;;
    Device_Model) device_model="${info_value}" ;;
    Model_Number) device_model="${info_value}" ;;
    Serial_[Nn]umber) serial_number="${info_value}" ;;
    Firmware_Version) fw_version="${info_value}" ;;
    User_Capacity) size="$(echo ${info_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%d GB\n", $1/1024/1024/1024}')" ;;
    Namespace_1_Size/Capacity) size="$(echo ${info_value}| sed -E 's/\s+.+$//g' | tr -d ','| awk '{printf "%d GB\n", $1/1024/1024/1024}')" ;;
    Vendor) vendor="${info_value}" ;;
    Product) product="${info_value}" ;;
    Revision) revision="${info_value}" ;;
    Logical_Unit_id) lun_id="${info_value}" ;;
    esac
    if [[ "${info_type}" == 'SMART_support_is' ]]; then
      val=$(echo $info_value | awk '{$1=$1k;print}')
      case "${val:0:7}" in
      Enabled) smart_enabled=1 ;;
      Availab) smart_available=1 ;;
      Unavail) smart_available=0 ;;
      esac
    fi
    if [[ "${info_type}" == 'SMART_overall-health_self-assessment_test_result' ]]; then
      info_value=`echo ${info_value}| tr -d ' '`
      case "${info_value}" in
      PASSED) smart_healthy=1 ;;
      esac
    elif [[ "${info_type}" == 'SMART_Health_Status' ]]; then
      info_value=`echo ${info_value}| tr -d ' '`
      case "${info_value}" in
      OK) smart_healthy=1 ;;
      esac
    fi
  done
  if [[ $device_model == 'N/A' ]] && ([[ $vendor != 'N/A' ]] || [[ $product != 'N/A'  ]])
    then
    device_model="${vendor} $product"
  fi

disk=$(echo $disk | awk '{$1=$1k;print}')
  name=$(echo $name | awk '{$1=$1k;print}')
  vendor=$(echo $vendor | awk '{$1=$1k;print}')
  model_family=$(echo $model_family | awk '{$1=$1k;print}')
  device_model=$(echo $device_model | awk '{$1=$1k;print}')
  serial_number=$(echo $serial_number | awk '{$1=$1k;print}')
  fw_version=$(echo $fw_version | awk '{$1=$1k;print}')

echo "device_info{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",vendor=\"${vendor}\",product=\"${product}\",revision=\"${revision}\",lun_id=\"${lun_id}\",model_family=\"${model_family}\",device_model=\"${device_model}\",serial_number=\"${serial_number}\",size=\"${size}\",firmware_version=\"${fw_version}\",smart_healthy=\"${smart_healthy}\"} 1"
  echo "device_smart_available{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\"} ${smart_available}"
  echo "device_smart_enabled{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\"} ${smart_enabled}"
  echo "device_smart_healthy{disk=\"${disk}\",type=\"${disk_type}\",name=\"${name}\",serial_number=\"${serial_number}\"} ${smart_healthy}"
}

format_output() {
  sort |
    awk -F'{' "${output_format_awk}"
}

smartctl_version="$($SMARTCTL -V | head -n1 | awk '$1 == "smartctl" {print $2}')"

echo "smartctl_version{version=\"${smartctl_version}\"} 1" | format_output

if [[ "$(expr "${smartctl_version}" : '$[0-9]*$\..*')" -lt 6 ]]; then
  exit
fi

device_list=
if [[ -z $FORCED_DEVICE_LIST ]]
  then
  device_list="$($SMARTCTL --scan-open | awk '/^\/dev/{print $1 "|" $3}')"
else
  device_list=$FORCED_DEVICE_LIST
fi

for device in ${device_list}; do
  disk="$(echo ${device} | cut -f1 -d'|')"
  type="$(echo ${device} | cut -f2 -d'|')"
  disk=$(echo $disk | awk '{$1=$1k;print}')
  type=$(echo $type | awk '{$1=$1k;print}')

serial_number=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/[Ss]erial [Nn]umber/ {print $2}'| sed -E 's/^\s+//g'`
  serial_number=$(echo $serial_number | awk '{$1=$1k;print}')

active=1
  # Check if the device is in a low-power mode
  $SMARTCTL -n standby -d "${type}" "${disk}" > /dev/null || active=0
  echo "device_active{disk=\"${disk}\",type=\"${type}\",serial_number=\"${serial_number}\"}" "${active}"
  # Skip further metrics to prevent the disk from spinning up
  test ${active} -eq 0 && continue
  # Get Device name label
  name=""
  case ${type} in
    scsi)
      vendor=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Vendor/ {print $2}'| sed -E 's/^\s+//g'`
      product=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Product/ {print $2}'| sed -E 's/^\s+//g'`
      name="${vendor} ${product}" ;;
	nvme)
      name=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Model Number/ {print $2}'| sed -E 's/^\s+//g'` ;;
    *)
      name=`$SMARTCTL -i -d "${type}" "${disk}" | awk -F ':' '/Device Model/ {print $2}'| sed -E 's/^\s+//g'` ;;
  esac

name=$(echo $name | awk '{$1=$1k;print}')
  echo "smartctl_run{disk=\"${disk}\",type=\"${type}\",name=\"${name}\",serial_number=\"${serial_number}\"}" "$(TZ=UTC date '+%s')"
  # Get the SMART information and health
  $SMARTCTL -i -H -d "${type}" "${disk}" | parse_smartctl_info "${disk}" "${type}" "${name}"
  # Get the SMART attributes
  case ${type} in
    sat) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;
    nvme) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_nvme_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;
    atacam) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;
    sat+megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_attributes "${disk}" "${type}" "${name}" "${serial_number}" ;;
    scsi) $SMARTCTL -a -d "${type}" "${disk}" | parse_smartctl_scsi_attributes "${disk}" "${type}" "${name}" ;;
    megaraid*) $SMARTCTL -A -d "${type}" "${disk}" | parse_smartctl_scsi_attributes "${disk}" "${type}" "${name}" ;;
    *)
      continue
      ;;
  esac
done | format_output